- 12 Oct, 2016 21 commits
-
-
Hiroshi Ioka authored
EvalSymlinks returns error if given path or its target path don't exist. Add a test for future improvement. Change-Id: Ic9a4aa5eaee0fe7ac523d54d8eb3132a11b380b3 Reviewed-on: https://go-review.googlesource.com/27330Reviewed-by:
Russ Cox <rsc@golang.org> Run-TryBot: Russ Cox <rsc@golang.org>
-
Dave Cheney authored
This change adds runtime/trace support to go tool compile. Change-Id: I6c496b9b063796123f75eba6af511c53a57c0196 Reviewed-on: https://go-review.googlesource.com/25354 Run-TryBot: Russ Cox <rsc@golang.org> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
David Crawshaw <crawshaw@golang.org>
-
Joshua Boelter authored
Add checks for failure of CreateEvent, SetEvent or WaitForSingleObject. Any failures are considered fatal and will throw() after printing an informative message. Updates #16646 Change-Id: I3bacf9001d2abfa8667cc3aff163ff2de1c99915 Reviewed-on: https://go-review.googlesource.com/26655Reviewed-by:
-
David du Colombier authored
This cosmetic change defines ld.FlagTextAddr using ld.HEADR in the Plan 9 cases, like it is done for other operating systems. Change-Id: Ic929c1c437f25661058682cf3e159f0b16cdc538 Reviewed-on: https://go-review.googlesource.com/30912 Run-TryBot: David du Colombier <0intro@gmail.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
Ian Lance Taylor <iant@golang.org>
-
Mikio Hara authored
Also removes unnecessary allocation. Change-Id: I3406cf75a7b64d93b2b99c7f1f5c78f580452b60 Reviewed-on: https://go-review.googlesource.com/30891 Run-TryBot: Mikio Hara <mikioh.mikioh@gmail.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
-
David du Colombier authored
Support for multiple text sections was added in CL 27790. However, this change broke the build on plan9/amd64. In relocsym, the R_ADDROFF relocation was changed to use offsets relative to the start of the first text section. However, Segtext.Vaddr is the address of the text segment, while we expect to start from the first section (text.runtime) of the text segment. Fixes #17411. Change-Id: I86bbcbda81cea735b0ecf156eab2e6e5d63acce3 Reviewed-on: https://go-review.googlesource.com/30911 Run-TryBot: David du Colombier <0intro@gmail.com> Reviewed-by:
-
Ian Lance Taylor authored
All the implementations of NsecToTimespec and NsecToTimeval were the same other than types. Write a single version that uses GOARCH/GOOS-specific setTimespec and setTimeval functions to handle the types. The logic in NsecToTimespec and NsecToTimeval caused times before 1970 to have a negative usec/nsec. The Linux kernel requires that usec contain a positive number; for consistency, we do this for both NsecToTimespec and NsecToTimeval. Change-Id: I525eaba2e7cdb00cb57fa00182dabf19fec298ae Reviewed-on: https://go-review.googlesource.com/30826 Run-TryBot: Ian Lance Taylor <iant@golang.org> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
Brad Fitzpatrick <bradfitz@golang.org> Reviewed-by:
-
Chris McGee authored
The new implementation parses the plan9 interface files and builds Interface representations for the net package. Updates #17218 Change-Id: I3199d18d9e96a17e922186c3abff1d7cd9cbec2e Reviewed-on: https://go-review.googlesource.com/29963 Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
-
Sina Siadat authored
Show usage of os.IsNotExist in an example. Change-Id: I5306ea06c370099de5b02668dfa02b87b0c2beac Reviewed-on: https://go-review.googlesource.com/25571Reviewed-by:
-
Shawn Walker-Salas authored
Support the tagging of binaries created with the internal linker on Solaris as having a non-executable stack by writing a PT_SUNWSTACK program header. Fixes #16074 Change-Id: I3888f2153083385d04a52f341570f93e5738b276 Reviewed-on: https://go-review.googlesource.com/24142 Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
-
Gyu-Ho Lee authored
To prevent slice growth when appending. Change-Id: I2cdb9b09bc33f63188b19573c8b9a77601e63801 Reviewed-on: https://go-review.googlesource.com/23783 Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org> Reviewed-by:
-
Alex Brainman authored
Updates #15978 Updates #16145 Change-Id: I161f5bc97d41c08bf5e1405ccafa86232d70886d Reviewed-on: https://go-review.googlesource.com/25320 Run-TryBot: Alex Brainman <alex.brainman@gmail.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
-
Tristan Ooohry authored
The error coming out of matchGoImport does not differentiate between having no imports, and having some invalid imports. This some extra context to the error message to help debug these issues. Fixes #16467 Change-Id: I3e9a119ed73da1bed5e07365be0221ea6b7f19db Reviewed-on: https://go-review.googlesource.com/25121 Run-TryBot: Russ Cox <rsc@golang.org> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
-
Xuyang Kang authored
If strict option is enabled, when decoding, instead of skip the padding bits, it will do strict check to enforce they are set to zero. Fixes #15656 Change-Id: I869fb725a39cc9dde44dbc4ff0046446e7abc642 Reviewed-on: https://go-review.googlesource.com/24964Reviewed-by:
-
Gustav Westling authored
Simplify map key literals in "gofmt -s" Fixes #16461. Change-Id: Ia61739b34a30ac27f6696f94a98809109a8a7b61 Reviewed-on: https://go-review.googlesource.com/25530 Run-TryBot: Russ Cox <rsc@golang.org> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
-
Keith Randall authored
Update the description of the conditions under which highlighting might be misleading. Fixes #16754 Change-Id: I3078a09e0b9a76d12078352e15a3f26ba3f1bbee Reviewed-on: https://go-review.googlesource.com/30818Reviewed-by:
David Chase <drchase@google.com>
-
Dmitri Shuralyov authored
This is a followup to CL 24747, where the package doc phrase "Functions in this package replace occurrences of slash unless otherwise specified." was removed. The phrase was originally added in CL 7310 together with this explicit opt out statement for SplitList. Remove it since it's no longer neccessary. This helps consistency. Updates #16111. Updates #10122. Change-Id: Iba86de57c24100adecac9cb5892ce180126c0ea6 Reviewed-on: https://go-review.googlesource.com/25250Reviewed-by:
-
Gleb Stepanov authored
Fix typo in word synchronization in comments. Change-Id: I453b4e799301e758799c93df1e32f5244ca2fb84 Reviewed-on: https://go-review.googlesource.com/25174Reviewed-by:
-
Michael Munday authored
The canBackTrace variable is true for all of the architectures Go supports and this is likely to remain the case as new architectures are added. Change-Id: I73900c018eb4b2e5c02fccd8d3e89853b2ba9d90 Reviewed-on: https://go-review.googlesource.com/22423Reviewed-by:
Cherry Zhang <cherryyz@google.com> Run-TryBot: Cherry Zhang <cherryyz@google.com> TryBot-Result: Gobot Gobot <gobot@golang.org>
-
Michael Pratt authored
When generating callgrind format output, produce cost lines at instruction granularity. This allows visualizers supporting the callgrind format to display instruction-level profiling information. We also need to provide the object file (ob=) in order for tools to find the object file to disassemble when displaying assembly. We opportunistically group cost lines corressponding to the same function together, reducing the number of superfluous description lines. Subposition compression (relative position numbering) is also used to reduce the output size. Change-Id: Id8e960b81dc7a47ec1dfbae877521f76972431c4 Reviewed-on: https://go-review.googlesource.com/23781 Run-TryBot: Michael Pratt <mpratt@google.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
Raul Silvera <rsilvera@google.com> Reviewed-by:
-
Filippo Valsorda authored
The trace tool can generate some interesting profiles, but it was only exposing them as svg through the web UI. This adds command line options to generate the raw pprof file. Change-Id: I52e4f909fdca6f65c3616add444e3892783640f4 Reviewed-on: https://go-review.googlesource.com/23324Reviewed-by:
-
- 11 Oct, 2016 18 commits
-
-
Ian Lance Taylor authored
All implementations of these functions are identical. Change-Id: I7cbea53c02bb0cee75e30beed19d29ba0a7ef657 Reviewed-on: https://go-review.googlesource.com/30819 Run-TryBot: Ian Lance Taylor <iant@golang.org> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
-
James Clarke authored
Change-Id: I1a2504ad9ca8607588d2d366598115fe360435b5 Reviewed-on: https://go-review.googlesource.com/30870Reviewed-by:
-
Joe Tsai authored
We should preserve the fact that a roundtrip read on fields with the zero value should remain the zero for those that are reasonable to stay that way. If the zero value for a MS-DOS timestamp was used, then it is sensible for that zero value to also be read back later. Fixes #17403 Change-Id: I32c3915eab180e91ddd2499007374f7b85f0bd76 Reviewed-on: https://go-review.googlesource.com/30811 Run-TryBot: Joe Tsai <thebrokentoaster@gmail.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
-
Matthew Dempsky authored
Shrinks cmd/go's text segment by 0.9%. text data bss dec hex filename 6447148 231643 146328 6825119 68249f go.before 6387404 231643 146328 6765375 673b3f go.after Change-Id: I431e8482dbb11a7c1c77f2196cada43d5dad2981 Reviewed-on: https://go-review.googlesource.com/30817Reviewed-by:
Austin Clements <austin@google.com>
-
Matthew Dempsky authored
Also, fix a byte-ordering problem with stack maps for assembly function signatures on big-endian targets. Change-Id: I6e8698f5fbb04b31771a65f4a8f3f9c045ff3c98 Reviewed-on: https://go-review.googlesource.com/30816Reviewed-by:
-
Michael Munday authored
We save and restore the link register in non-leaf functions because it is clobbered by CALLs. It is therefore available for general purpose use. Only enabled on s390x currently. The RC4 benchmarks in particular benefit from the extra register: name old speed new speed delta RC4_128 243MB/s ± 2% 341MB/s ± 2% +40.46% (p=0.008 n=5+5) RC4_1K 267MB/s ± 0% 359MB/s ± 1% +34.32% (p=0.008 n=5+5) RC4_8K 271MB/s ± 0% 362MB/s ± 0% +33.61% (p=0.008 n=5+5) Change-Id: Id23bff95e771da9425353da2f32668b8e34ba09f Reviewed-on: https://go-review.googlesource.com/30597Reviewed-by:
-
Adam Langley authored
The Subject and Issuer names in a certificate look like they should be a list of key-value pairs. However, they're actually a list of lists of key-value pairs. Previously we only looked at the first element of each sublist and the vast majority of certificates only have one element per sublist. However, it's possible to have multiple elements and some 360 certificates from the “Pilot” log are so constructed. This change causes all elements of the sublists to be processed. Fixes #16836. Change-Id: Ie0a5159135b08226ec517fcf251aa17aada37857 Reviewed-on: https://go-review.googlesource.com/30810Reviewed-by:
-
Hajime Hoshi authored
Change-Id: Ib14b5421bb5e407bbd4d3cbfc68c92d3dd257cb1 Reviewed-on: https://go-review.googlesource.com/30732 Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
Matthew Dempsky <mdempsky@google.com>
-
David Chase authored
In some cases the members of the root set from which flood runs themselves escape, without their referents being also tagged as escaping. Fix this by reflooding from those roots whose escape increases, and also enhance the "leak" test to include reachability from a heap-escaped root. Fixes #17318. Change-Id: Ied1e75cee17ede8ca72a8b9302ce8201641ec593 Reviewed-on: https://go-review.googlesource.com/30693 Run-TryBot: David Chase <drchase@google.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
-
Russ Cox authored
A later CL will be adding more code here. It will help to keep it separate from the other code. Change-Id: I971ba53de819cd10991b51fdec665984939a5f9b Reviewed-on: https://go-review.googlesource.com/30709Reviewed-by:
-
Russ Cox authored
The Montgomery multiply code is applicable to this case but was being bypassed. Don't do that. The old test len(x) > 1 was really just a bad approximation to x > 1. name old time/op new time/op delta Exp-8 5.56ms ± 4% 5.73ms ± 3% ~ (p=0.095 n=5+5) Exp2-8 7.59ms ± 1% 5.66ms ± 1% -25.40% (p=0.008 n=5+5) This comes up especially when doing Fermat (Miller-Rabin) primality tests with base 2. Change-Id: I4cc02978db6dfa93f7f3c8f32718e25eedb4f5ed Reviewed-on: https://go-review.googlesource.com/30708Reviewed-by:
-
Russ Cox authored
This way you can still run 'go test' or 'go bench -run Foo' without wondering why it is taking so very long. Change-Id: Icfa097a6deb1d6682acb7be9f34729215c29eabb Reviewed-on: https://go-review.googlesource.com/30707Reviewed-by:
Robert Griesemer <gri@golang.org>
-
Cherry Zhang authored
Change-Id: I59f7afa7a5803d19f8b21fe70fc85ef997bb3a85 Reviewed-on: https://go-review.googlesource.com/30542 Run-TryBot: Cherry Zhang <cherryyz@google.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
-
Cherry Zhang authored
ARM direct CALL/JMP instruction has 24 bit offset, which can only encodes jumps within +/-32M. When the target is too far, the top bits get truncated and the program jumps wild. This CL detects too-far jumps and automatically insert trampolines, currently only internal linking on ARM. It is necessary to make the following changes to the linker: - Resolve direct jump relocs when assigning addresses to functions. this allows trampoline insertion without moving all code that already laid down. - Lay down packages in dependency order, so that when resolving a inter-package direct jump reloc, the target address is already known. Intra-package jumps are assumed never too far. - a linker flag -debugtramp is added for debugging trampolines: "-debugtramp=1 -v" prints trampoline debug message "-debugtramp=2" forces all inter-package jump to use trampolines (currently ARM only) "-debugtramp=2 -v" does both - Some data structures are changed for bookkeeping. On ARM, pseudo DIV/DIVU/MOD/MODU instructions now clobber R8 (unfortunate). In the standard library there is no ARM assembly code that uses these instructions, and the compiler no longer emits them (CL 29390). all.bash passes with -debugtramp=2, except a disassembly test (this is unavoidable as we changed the instruction). TBD: debug info of trampolines? Fixes #17028. Change-Id: Idcce347ea7e0af77c4079041a160b2f6e114b474 Reviewed-on: https://go-review.googlesource.com/29397Reviewed-by: -
Ian Lance Taylor authored
If we get a SIGPROF on a non-Go thread, and the program has not called runtime.SetCgoTraceback so we have no way to collect a stack trace, then record a profile that is just the PC where the signal occurred. That will at least point the user to the right area. Retrieving the PC from the sigctxt in a signal handler on a non-G thread required marking a number of trivial sigctxt methods as nosplit, and, for extra safety, nowritebarrierrec. The test shows that the existing test CgoPprofThread test does not test the stack trace, just the profile signal. Leaving that for later. Change-Id: I8f8f3ff09ac099fc9d9df94b5a9d210ffc20c4ab Reviewed-on: https://go-review.googlesource.com/30252 Run-TryBot: Ian Lance Taylor <iant@golang.org> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
Dmitry Vyukov <dvyukov@google.com>
-
Hyang-Ah (Hana) Kim authored
When starting tracing, EvGoCreate events are added for existing goroutines that may have been blocking in syscall. EvGoCreate increments the runnable goroutine count. This change makes the following EvGoInSyscall event decrement the runnable goroutine count because we now know that goroutine is in syscall, and not runnable. Made generateTrace return an error, at any given time, the number of runnable/running/insyscall goroutines becomes non-negative. Added a basic test that checks the number of runnable/running goroutines don't include the goroutines in syscall - the test failed before this change. Change-Id: Ib732c382e7bd17158a437576f9d589ab89097ce6 Reviewed-on: https://go-review.googlesource.com/25552 Run-TryBot: Hyang-Ah Hana Kim <hyangah@gmail.com> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
-
Alex Brainman authored
CL 14472 solved issue #12030 by explicitly linking msvcrt.dll to every cgo executable we build. This CL achieves the same by manually loading ntdll.dll during startup. Updates #12030 Change-Id: I5d9cd925ef65cc34c5d4031c750f0f97794529b2 Reviewed-on: https://go-review.googlesource.com/30737 Run-TryBot: Ian Lance Taylor <iant@golang.org> TryBot-Result: Gobot Gobot <gobot@golang.org> Reviewed-by:
Minux Ma <minux@golang.org>
-
John Dethridge authored
The (pc, line) deltas in the line number information are currently encoded either with a special opcode, or with a triplet of DW_LNS_advance_pc, DW_LNS_advance_line, and DW_LNS_copy instructions. Instead of DW_LNS_copy, this change always uses a special opcode, which can make DW_LNS_advance_pc or DW_LNS_advance_line unnecessary, or make their operands take fewer bytes. It chooses the special opcode so that the encoding of the remaining deltas is as small as possible. Use DW_LNS_const_add_pc or DW_LNS_fixed_advance_pc instead of DW_LNS_advance_pc for deltas where they save a byte. Update LINE_BASE and LINE_RANGE constants to optimal values for this strategy. This reduces line number information by about 35% and total size by about 2% for a typical binary. Change-Id: Ia61d6bf19c95c1d34ba63c67ed32b376beda225f Reviewed-on: https://go-review.googlesource.com/30577Reviewed-by:
-
- 10 Oct, 2016 1 commit
-
-
Russ Cox authored
- Add new BenchmarkQuoRem. - Eliminate allocation in divLarge nat pool - Unroll mulAddVWW body 4x - Remove some redundant slice loads in divLarge name old time/op new time/op delta QuoRem-8 2.18µs ± 1% 1.93µs ± 1% -11.38% (p=0.000 n=19+18) The starting point in the comparison here is Cherry's pending CL to turn mulWW and divWW into intrinsics. The optimizations in divLarge work best because all the function calls are gone. The effect of this CL is not as large if you don't assume Cherry's CL. Change-Id: Ia6138907489c5b9168497912e43705634e163b35 Reviewed-on: https://go-review.googlesource.com/30613 Run-TryBot: Russ Cox <rsc@golang.org> Reviewed-by:
-
