sx.c 77.2 KB
Newer Older
Linus Torvalds's avatar
Linus Torvalds committed
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227

/* sx.c -- driver for the Specialix SX series cards. 
 *
 *  This driver will also support the older SI, and XIO cards.
 *
 *
 *   (C) 1998 - 2000  R.E.Wolff@BitWizard.nl
 *
 *  Simon Allen (simonallen@cix.compulink.co.uk) wrote a previous
 *  version of this driver. Some fragments may have been copied. (none
 *  yet :-)
 *
 * Specialix pays for the development and support of this driver.
 * Please DO contact support@specialix.co.uk if you require
 * support. But please read the documentation (sx.txt) first.
 *
 *
 *
 *      This program is free software; you can redistribute it and/or
 *      modify it under the terms of the GNU General Public License as
 *      published by the Free Software Foundation; either version 2 of
 *      the License, or (at your option) any later version.
 *
 *      This program is distributed in the hope that it will be
 *      useful, but WITHOUT ANY WARRANTY; without even the implied
 *      warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
 *      PURPOSE.  See the GNU General Public License for more details.
 *
 *      You should have received a copy of the GNU General Public
 *      License along with this program; if not, write to the Free
 *      Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139,
 *      USA.
 *
 * Revision history:
 * $Log: sx.c,v $
 * Revision 1.33  2000/03/09 10:00:00  pvdl,wolff
 * - Fixed module and port counting
 * - Fixed signal handling
 * - Fixed an Ooops
 * 
 * Revision 1.32  2000/03/07 09:00:00  wolff,pvdl
 * - Fixed some sx_dprintk typos
 * - added detection for an invalid board/module configuration
 *
 * Revision 1.31  2000/03/06 12:00:00  wolff,pvdl
 * - Added support for EISA
 *
 * Revision 1.30  2000/01/21 17:43:06  wolff
 * - Added support for SX+
 *
 * Revision 1.26  1999/08/05 15:22:14  wolff
 * - Port to 2.3.x
 * - Reformatted to Linus' liking.
 *
 * Revision 1.25  1999/07/30 14:24:08  wolff
 * Had accidentally left "gs_debug" set to "-1" instead of "off" (=0).
 *
 * Revision 1.24  1999/07/28 09:41:52  wolff
 * - I noticed the remark about use-count straying in sx.txt. I checked
 *   sx_open, and found a few places where that could happen. I hope it's
 *   fixed now.
 *
 * Revision 1.23  1999/07/28 08:56:06  wolff
 * - Fixed crash when sx_firmware run twice.
 * - Added sx_slowpoll as a module parameter (I guess nobody really wanted
 *   to change it from the default... )
 * - Fixed a stupid editing problem I introduced in 1.22.
 * - Fixed dropping characters on a termios change.
 *
 * Revision 1.22  1999/07/26 21:01:43  wolff
 * Russell Brown noticed that I had overlooked 4 out of six modem control
 * signals in sx_getsignals. Ooops.
 *
 * Revision 1.21  1999/07/23 09:11:33  wolff
 * I forgot to free dynamically allocated memory when the driver is unloaded.
 *
 * Revision 1.20  1999/07/20 06:25:26  wolff
 * The "closing wait" wasn't honoured. Thanks to James Griffiths for
 * reporting this.
 *
 * Revision 1.19  1999/07/11 08:59:59  wolff
 * Fixed an oops in close, when an open was pending. Changed the memtest
 * a bit. Should also test the board in word-mode, however my card fails the
 * memtest then. I still have to figure out what is wrong...
 *
 * Revision 1.18  1999/06/10 09:38:42  wolff
 * Changed the format of the firmware revision from %04x to %x.%02x .
 *
 * Revision 1.17  1999/06/04 09:44:35  wolff
 * fixed problem: reference to pci stuff when config_pci was off...
 * Thanks to Jorge Novo for noticing this.
 *
 * Revision 1.16  1999/06/02 08:30:15  wolff
 * added/removed the workaround for the DCD bug in the Firmware.
 * A bit more debugging code to locate that...
 *
 * Revision 1.15  1999/06/01 11:35:30  wolff
 * when DCD is left low (floating?), on TA's the firmware first tells us
 * that DCD is high, but after a short while suddenly comes to the
 * conclusion that it is low. All this would be fine, if it weren't that
 * Unix requires us to send a "hangup" signal in that case. This usually
 * all happens BEFORE the program has had a chance to ioctl the device
 * into clocal mode..
 *
 * Revision 1.14  1999/05/25 11:18:59  wolff
 * Added PCI-fix.
 * Added checks for return code of sx_sendcommand.
 * Don't issue "reconfig" if port isn't open yet. (bit us on TA modules...)
 *
 * Revision 1.13  1999/04/29 15:18:01  wolff
 * Fixed an "oops" that showed on SuSE 6.0 systems.
 * Activate DTR again after stty 0.
 *
 * Revision 1.12  1999/04/29 07:49:52  wolff
 * Improved "stty 0" handling a bit. (used to change baud to 9600 assuming
 *     the connection would be dropped anyway. That is not always the case,
 *     and confuses people).
 * Told the card to always monitor the modem signals.
 * Added support for dynamic  gs_debug adjustments.
 * Now tells the rest of the system the number of ports.
 *
 * Revision 1.11  1999/04/24 11:11:30  wolff
 * Fixed two stupid typos in the memory test.
 *
 * Revision 1.10  1999/04/24 10:53:39  wolff
 * Added some of Christian's suggestions.
 * Fixed an HW_COOK_IN bug (ISIG was not in I_OTHER. We used to trust the
 * card to send the signal to the process.....)
 *
 * Revision 1.9  1999/04/23 07:26:38  wolff
 * Included Christian Lademann's 2.0 compile-warning fixes and interrupt
 *    assignment redesign.
 * Cleanup of some other stuff.
 *
 * Revision 1.8  1999/04/16 13:05:30  wolff
 * fixed a DCD change unnoticed bug.
 *
 * Revision 1.7  1999/04/14 22:19:51  wolff
 * Fixed typo that showed up in 2.0.x builds (get_user instead of Get_user!)
 *
 * Revision 1.6  1999/04/13 18:40:20  wolff
 * changed misc-minor to 161, as assigned by HPA.
 *
 * Revision 1.5  1999/04/13 15:12:25  wolff
 * Fixed use-count leak when "hangup" occurred.
 * Added workaround for a stupid-PCIBIOS bug.
 *
 *
 * Revision 1.4  1999/04/01 22:47:40  wolff
 * Fixed < 1M linux-2.0 problem.
 * (vremap isn't compatible with ioremap in that case)
 *
 * Revision 1.3  1999/03/31 13:45:45  wolff
 * Firmware loading is now done through a separate IOCTL.
 *
 * Revision 1.2  1999/03/28 12:22:29  wolff
 * rcs cleanup
 *
 * Revision 1.1  1999/03/28 12:10:34  wolff
 * Readying for release on 2.0.x (sorry David, 1.01 becomes 1.1 for RCS). 
 *
 * Revision 0.12  1999/03/28 09:20:10  wolff
 * Fixed problem in 0.11, continueing cleanup.
 *
 * Revision 0.11  1999/03/28 08:46:44  wolff
 * cleanup. Not good.
 *
 * Revision 0.10  1999/03/28 08:09:43  wolff
 * Fixed loosing characters on close.
 *
 * Revision 0.9  1999/03/21 22:52:01  wolff
 * Ported back to 2.2.... (minor things)
 *
 * Revision 0.8  1999/03/21 22:40:33  wolff
 * Port to 2.0
 *
 * Revision 0.7  1999/03/21 19:06:34  wolff
 * Fixed hangup processing.
 *
 * Revision 0.6  1999/02/05 08:45:14  wolff
 * fixed real_raw problems. Inclusion into kernel imminent.
 *
 * Revision 0.5  1998/12/21 23:51:06  wolff
 * Snatched a nasty bug: sx_transmit_chars was getting re-entered, and it
 * shouldn't have. THATs why I want to have transmit interrupts even when
 * the buffer is empty.
 *
 * Revision 0.4  1998/12/17 09:34:46  wolff
 * PPP works. ioctl works. Basically works!
 *
 * Revision 0.3  1998/12/15 13:05:18  wolff
 * It works! Wow! Gotta start implementing IOCTL and stuff....
 *
 * Revision 0.2  1998/12/01 08:33:53  wolff
 * moved over to 2.1.130
 *
 * Revision 0.1  1998/11/03 21:23:51  wolff
 * Initial revision. Detects SX card.
 *
 * */


#define RCS_ID "$Id: sx.c,v 1.33 2000/03/08 10:01:02 wolff, pvdl Exp $"
#define RCS_REV "$Revision: 1.33 $"


#include <linux/module.h>
#include <linux/config.h> 
#include <linux/kdev_t.h>
#include <asm/io.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/ioport.h>
#include <linux/interrupt.h>
#include <linux/errno.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/mm.h>
#include <linux/serial.h>
#include <linux/fcntl.h>
#include <linux/major.h>
#include <linux/delay.h>
#include <linux/version.h>
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/miscdevice.h>
228
#include <linux/bitops.h>
Linus Torvalds's avatar
Linus Torvalds committed
229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259

/* The 3.0.0 version of sxboards/sxwindow.h  uses BYTE and WORD.... */
#define BYTE u8
#define WORD u16

/* .... but the 3.0.4 version uses _u8 and _u16. */
#define _u8 u8
#define _u16 u16

#include "sxboards.h"
#include "sxwindow.h"

#include <linux/compatmac.h>
#include <linux/generic_serial.h>
#include "sx.h"


/* I don't think that this driver can handle more than 256 ports on
   one machine. You'll have to increase the number of boards in sx.h
   if you want more than 4 boards.  */


/* Why the hell am I defining these here? */
#define SX_TYPE_NORMAL 1
#define SX_TYPE_CALLOUT 2


#ifndef PCI_DEVICE_ID_SPECIALIX_SX_XIO_IO8
#define PCI_DEVICE_ID_SPECIALIX_SX_XIO_IO8 0x2000
#endif

Linus Torvalds's avatar
Linus Torvalds committed
260 261 262 263 264
static struct pci_device_id sx_pci_tbl[] = {
	{ PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_SPECIALIX_SX_XIO_IO8, PCI_ANY_ID, PCI_ANY_ID },
	{ 0 }
};
MODULE_DEVICE_TABLE(pci, sx_pci_tbl);
Linus Torvalds's avatar
Linus Torvalds committed
265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355

/* Configurable options: 
   (Don't be too sure that it'll work if you toggle them) */

/* Am I paranoid or not ? ;-) */
#undef SX_PARANOIA_CHECK


/* 20 -> 2000 per second. The card should rate-limit interrupts at 100
   Hz, but it is user configurable. I don't recommend going above 1000
   Hz. The interrupt ratelimit might trigger if the interrupt is
   shared with a very active other device. */
#define IRQ_RATE_LIMIT 20

/* Sharing interrupts is possible now. If the other device wants more
   than 2000 interrupts per second, we'd gracefully decline further
   interrupts. That's not what we want. On the other hand, if the
   other device interrupts 2000 times a second, don't use the SX
   interrupt. Use polling. */
#undef IRQ_RATE_LIMIT


#if 0
/* Not implemented */
/* 
 * The following defines are mostly for testing purposes. But if you need
 * some nice reporting in your syslog, you can define them also.
 */
#define SX_REPORT_FIFO
#define SX_REPORT_OVERRUN
#endif 


/* Function prototypes */
static void sx_disable_tx_interrupts (void * ptr); 
static void sx_enable_tx_interrupts (void * ptr); 
static void sx_disable_rx_interrupts (void * ptr); 
static void sx_enable_rx_interrupts (void * ptr); 
static int  sx_get_CD (void * ptr); 
static void sx_shutdown_port (void * ptr);
static int  sx_set_real_termios (void  *ptr);
static void sx_hungup (void  *ptr);
static void sx_close (void  *ptr);
static int sx_chars_in_buffer (void * ptr);
static int sx_init_board (struct sx_board *board);
static int sx_init_portstructs (int nboards, int nports);
static int sx_fw_ioctl (struct inode *inode, struct file *filp,
                        unsigned int cmd, unsigned long arg);
static int sx_init_drivers(void);


static struct tty_driver sx_driver, sx_callout_driver;

static struct tty_struct * sx_table[SX_NPORTS];
static struct termios ** sx_termios;
static struct termios ** sx_termios_locked;

static struct sx_board boards[SX_NBOARDS];
static struct sx_port *sx_ports;
static int sx_refcount;
static int sx_initialized;
static int sx_nports;
static int sx_debug;


/* You can have the driver poll your card. 
    - Set sx_poll to 1 to poll every timer tick (10ms on Intel). 
      This is used when the card cannot use an interrupt for some reason.

    - set sx_slowpoll to 100 to do an extra poll once a second (on Intel). If 
      the driver misses an interrupt (report this if it DOES happen to you!)
      everything will continue to work.... 
 */
static int sx_poll = 1;
static int sx_slowpoll;

/* The card limits the number of interrupts per second. 
   At 115k2 "100" should be sufficient. 
   If you're using higher baudrates, you can increase this...
 */

static int sx_maxints = 100;

/* These are the only open spaces in my computer. Yours may have more
   or less.... -- REW 
   duh: Card at 0xa0000 is possible on HP Netserver?? -- pvdl
*/
static int sx_probe_addrs[]= {0xc0000, 0xd0000, 0xe0000, 
                              0xc8000, 0xd8000, 0xe8000};
static int si_probe_addrs[]= {0xc0000, 0xd0000, 0xe0000, 
                              0xc8000, 0xd8000, 0xe8000, 0xa0000};
356
static int si1_probe_addrs[]= { 0xd0000};
Linus Torvalds's avatar
Linus Torvalds committed
357 358 359

#define NR_SX_ADDRS (sizeof(sx_probe_addrs)/sizeof (int))
#define NR_SI_ADDRS (sizeof(si_probe_addrs)/sizeof (int))
360
#define NR_SI1_ADDRS (sizeof(si1_probe_addrs)/sizeof (int))
Linus Torvalds's avatar
Linus Torvalds committed
361 362 363 364 365 366 367 368 369 370 371 372 373 374


/* Set the mask to all-ones. This alas, only supports 32 interrupts. 
   Some architectures may need more. */
static int sx_irqmask = -1;

MODULE_PARM(sx_probe_addrs, "i");
MODULE_PARM(si_probe_addrs, "i");
MODULE_PARM(sx_poll, "i");
MODULE_PARM(sx_slowpoll, "i");
MODULE_PARM(sx_maxints, "i");
MODULE_PARM(sx_debug, "i");
MODULE_PARM(sx_irqmask, "i");

Linus Torvalds's avatar
Linus Torvalds committed
375 376
MODULE_LICENSE("GPL");

Linus Torvalds's avatar
Linus Torvalds committed
377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409
static struct real_driver sx_real_driver = {
	sx_disable_tx_interrupts,
	sx_enable_tx_interrupts,
	sx_disable_rx_interrupts,
	sx_enable_rx_interrupts,
	sx_get_CD,
	sx_shutdown_port, 
	sx_set_real_termios, 
	sx_chars_in_buffer,
	sx_close,
	sx_hungup,
};


/* 
   This driver can spew a whole lot of debugging output at you. If you
   need maximum performance, you should disable the DEBUG define. To
   aid in debugging in the field, I'm leaving the compile-time debug
   features enabled, and disable them "runtime". That allows me to
   instruct people with problems to enable debugging without requiring
   them to recompile... 
*/
#define DEBUG


#ifdef DEBUG
#define sx_dprintk(f, str...) if (sx_debug & f) printk (str)
#else
#define sx_dprintk(f, str...) /* nothing */
#endif



410 411
#define func_enter() sx_dprintk (SX_DEBUG_FLOW, "sx: enter %s\b",__FUNCTION__)
#define func_exit()  sx_dprintk (SX_DEBUG_FLOW, "sx: exit  %s\n", __FUNCTION__)
Linus Torvalds's avatar
Linus Torvalds committed
412

413 414
#define func_enter2() sx_dprintk (SX_DEBUG_FLOW, "sx: enter %s (port %d)\n", \
					__FUNCTION__, port->line)
Linus Torvalds's avatar
Linus Torvalds committed
415 416 417 418 419 420 421 422 423 424




/* 
 *  Firmware loader driver specific routines
 *
 */

static struct file_operations sx_fw_fops = {
425 426
	.owner		= THIS_MODULE,
	.ioctl		= sx_fw_ioctl,
Linus Torvalds's avatar
Linus Torvalds committed
427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478
};

static struct miscdevice sx_fw_device = {
	SXCTL_MISC_MINOR, "sxctl", &sx_fw_fops
};





#ifdef SX_PARANOIA_CHECK

/* This doesn't work. Who's paranoid around here? Not me! */

static inline int sx_paranoia_check(struct sx_port const * port,
				    kdev_t device, const char *routine)
{

	static const char *badmagic =
	  KERN_ERR "sx: Warning: bad sx port magic number for device %s in %s\n";
	static const char *badinfo =
	  KERN_ERR "sx: Warning: null sx port for device %s in %s\n";
 
	if (!port) {
		printk(badinfo, kdevname(device), routine);
		return 1;
	}
	if (port->magic != SX_MAGIC) {
		printk(badmagic, kdevname(device), routine);
		return 1;
	}

	return 0;
}
#else
#define sx_paranoia_check(a,b,c) 0
#endif

/* The timeouts. First try 30 times as fast as possible. Then give
   the card some time to breathe between accesses. (Otherwise the
   processor on the card might not be able to access its OWN bus... */

#define TIMEOUT_1 30
#define TIMEOUT_2 1000000


#ifdef DEBUG
static void my_hd (unsigned char *addr, int len)
{
	int i, j, ch;

	for (i=0;i<len;i+=16) {
Linus Torvalds's avatar
Linus Torvalds committed
479
		printk ("%p ", addr+i);
Linus Torvalds's avatar
Linus Torvalds committed
480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586
		for (j=0;j<16;j++) {
			printk ("%02x %s", addr[j+i], (j==7)?" ":"");
		}
		for (j=0;j<16;j++) {
			ch = addr[j+i];
			printk ("%c", (ch < 0x20)?'.':((ch > 0x7f)?'.':ch));
		}
		printk ("\n");
	}
}
#endif



/* This needs redoing for Alpha -- REW -- Done. */

static inline void write_sx_byte (struct sx_board *board, int offset, u8 byte)
{
	writeb (byte, board->base+offset);
}

static inline u8 read_sx_byte (struct sx_board *board, int offset)
{
	return readb (board->base+offset);
}


static inline void write_sx_word (struct sx_board *board, int offset, u16 word)
{
	writew (word, board->base+offset);
}

static inline u16 read_sx_word (struct sx_board *board, int offset)
{
	return readw (board->base + offset);
}


static int sx_busy_wait_eq (struct sx_board *board, 
                     	    int offset, int mask, int correctval)
{
	int i;

	func_enter ();

	for (i=0; i < TIMEOUT_1 > 0;i++) 
		if ((read_sx_byte (board, offset) & mask) == correctval) {
			func_exit ();
			return 1;
		}

	for (i=0; i < TIMEOUT_2 > 0;i++) {
		if ((read_sx_byte (board, offset) & mask) == correctval) {
			func_exit ();
			return 1;
		}
		udelay (1);
	}

	func_exit ();
	return 0;
}


static int sx_busy_wait_neq (struct sx_board *board, 
                      	     int offset, int mask, int badval)
{
	int i;

	func_enter ();

	for (i=0; i < TIMEOUT_1 > 0;i++) 
		if ((read_sx_byte (board, offset) & mask) != badval) {
			func_exit ();
			return 1;
		}

	for (i=0; i < TIMEOUT_2 > 0;i++) {
		if ((read_sx_byte (board, offset) & mask) != badval) {
			func_exit ();
			return 1;
		}
		udelay (1);
	}

	func_exit ();
	return 0;
}



/* 5.6.4 of 6210028 r2.3 */
static int sx_reset (struct sx_board *board)
{
	func_enter ();

	if (IS_SX_BOARD (board)) {

		write_sx_byte (board, SX_CONFIG, 0);
		write_sx_byte (board, SX_RESET, 1); /* Value doesn't matter */

		if (!sx_busy_wait_eq (board, SX_RESET_STATUS, 1, 0)) {
			printk (KERN_INFO "sx: Card doesn't respond to reset....\n");
			return 0;
		}
	} else if (IS_EISA_BOARD(board)) {
		outb(board->irq<<4, board->eisa_base+0xc02);
587 588
	} else if (IS_SI1_BOARD(board)) {
	        write_sx_byte (board, SI1_ISA_RESET,   0); // value does not matter
Linus Torvalds's avatar
Linus Torvalds committed
589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662
	} else {
		/* Gory details of the SI/ISA board */
		write_sx_byte (board, SI2_ISA_RESET,    SI2_ISA_RESET_SET);
		write_sx_byte (board, SI2_ISA_IRQ11,    SI2_ISA_IRQ11_CLEAR);
		write_sx_byte (board, SI2_ISA_IRQ12,    SI2_ISA_IRQ12_CLEAR);
		write_sx_byte (board, SI2_ISA_IRQ15,    SI2_ISA_IRQ15_CLEAR);
		write_sx_byte (board, SI2_ISA_INTCLEAR, SI2_ISA_INTCLEAR_CLEAR);
		write_sx_byte (board, SI2_ISA_IRQSET,   SI2_ISA_IRQSET_CLEAR);
	}

	func_exit ();
	return 1;
}


/* This doesn't work on machines where "NULL" isn't 0 */
/* If you have one of those, someone will need to write 
   the equivalent of this, which will amount to about 3 lines. I don't
   want to complicate this right now. -- REW
   (See, I do write comments every now and then :-) */
#define OFFSETOF(strct, elem) ((long)&(((struct strct *)NULL)->elem))


#define CHAN_OFFSET(port,elem) (port->ch_base + OFFSETOF (_SXCHANNEL, elem))
#define MODU_OFFSET(board,addr,elem)    (addr + OFFSETOF (_SXMODULE, elem))
#define  BRD_OFFSET(board,elem)                (OFFSETOF (_SXCARD, elem))


#define sx_write_channel_byte(port, elem, val) \
   write_sx_byte (port->board, CHAN_OFFSET (port, elem), val)

#define sx_read_channel_byte(port, elem) \
   read_sx_byte (port->board, CHAN_OFFSET (port, elem))

#define sx_write_channel_word(port, elem, val) \
   write_sx_word (port->board, CHAN_OFFSET (port, elem), val)

#define sx_read_channel_word(port, elem) \
   read_sx_word (port->board, CHAN_OFFSET (port, elem))


#define sx_write_module_byte(board, addr, elem, val) \
   write_sx_byte (board, MODU_OFFSET (board, addr, elem), val)

#define sx_read_module_byte(board, addr, elem) \
   read_sx_byte (board, MODU_OFFSET (board, addr, elem))

#define sx_write_module_word(board, addr, elem, val) \
   write_sx_word (board, MODU_OFFSET (board, addr, elem), val)

#define sx_read_module_word(board, addr, elem) \
   read_sx_word (board, MODU_OFFSET (board, addr, elem))


#define sx_write_board_byte(board, elem, val) \
   write_sx_byte (board, BRD_OFFSET (board, elem), val)

#define sx_read_board_byte(board, elem) \
   read_sx_byte (board, BRD_OFFSET (board, elem))

#define sx_write_board_word(board, elem, val) \
   write_sx_word (board, BRD_OFFSET (board, elem), val)

#define sx_read_board_word(board, elem) \
   read_sx_word (board, BRD_OFFSET (board, elem))


static int sx_start_board (struct sx_board *board)
{
	if (IS_SX_BOARD (board)) {
		write_sx_byte (board, SX_CONFIG, SX_CONF_BUSEN);
	} else if (IS_EISA_BOARD(board)) {
		write_sx_byte(board, SI2_EISA_OFF, SI2_EISA_VAL);
		outb((board->irq<<4)|4, board->eisa_base+0xc02);
663 664 665
	} else if (IS_SI1_BOARD(board)) {
		write_sx_byte (board, SI1_ISA_RESET_CLEAR, 0);
		write_sx_byte (board, SI1_ISA_INTCL, 0);
Linus Torvalds's avatar
Linus Torvalds committed
666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690
	} else {
		/* Don't bug me about the clear_set. 
		   I haven't the foggiest idea what it's about -- REW */
		write_sx_byte (board, SI2_ISA_RESET,    SI2_ISA_RESET_CLEAR);
		write_sx_byte (board, SI2_ISA_INTCLEAR, SI2_ISA_INTCLEAR_SET);
	}
	return 1;
}

#define SX_IRQ_REG_VAL(board) \
        ((board->flags & SX_ISA_BOARD)?(board->irq << 4):0)

/* Note. The SX register is write-only. Therefore, we have to enable the
   bus too. This is a no-op, if you don't mess with this driver... */
static int sx_start_interrupts (struct sx_board *board)
{

	/* Don't call this with board->irq == 0 */

	if (IS_SX_BOARD(board)) {
		write_sx_byte (board, SX_CONFIG, SX_IRQ_REG_VAL (board) | 
		                                 SX_CONF_BUSEN | 
		                                 SX_CONF_HOSTIRQ);
	} else if (IS_EISA_BOARD(board)) {
		inb(board->eisa_base+0xc03);  
691 692 693
	} else if (IS_SI1_BOARD(board)) {
	       write_sx_byte (board, SI1_ISA_INTCL,0);
	       write_sx_byte (board, SI1_ISA_INTCL_CLEAR,0);
Linus Torvalds's avatar
Linus Torvalds committed
694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158
	} else {
		switch (board->irq) {
		case 11:write_sx_byte (board, SI2_ISA_IRQ11, SI2_ISA_IRQ11_SET);break;
		case 12:write_sx_byte (board, SI2_ISA_IRQ12, SI2_ISA_IRQ12_SET);break;
		case 15:write_sx_byte (board, SI2_ISA_IRQ15, SI2_ISA_IRQ15_SET);break;
		default:printk (KERN_INFO "sx: SI/XIO card doesn't support interrupt %d.\n", 
		                board->irq);
		return 0;
		}
		write_sx_byte (board, SI2_ISA_INTCLEAR, SI2_ISA_INTCLEAR_SET);
	}

	return 1;
}


static int sx_send_command (struct sx_port *port, 
                     	    int command, int mask, int newstat)
{
	func_enter2 ();
	write_sx_byte (port->board, CHAN_OFFSET (port, hi_hstat), command);
	func_exit ();
	return sx_busy_wait_eq (port->board, CHAN_OFFSET (port, hi_hstat), mask, newstat);
}


static char *mod_type_s (int module_type)
{
	switch (module_type) {
	case TA4:       return "TA4";
	case TA8:       return "TA8";
	case TA4_ASIC:  return "TA4_ASIC";
	case TA8_ASIC:  return "TA8_ASIC";
	case MTA_CD1400:return "MTA_CD1400";
	case SXDC:      return "SXDC";
	default:return "Unknown/invalid";
	}
}


static char *pan_type_s (int pan_type)
{
	switch (pan_type) {
	case MOD_RS232DB25:     return "MOD_RS232DB25";
	case MOD_RS232RJ45:     return "MOD_RS232RJ45";
	case MOD_RS422DB25:     return "MOD_RS422DB25";
	case MOD_PARALLEL:      return "MOD_PARALLEL";
	case MOD_2_RS232DB25:   return "MOD_2_RS232DB25";
	case MOD_2_RS232RJ45:   return "MOD_2_RS232RJ45";
	case MOD_2_RS422DB25:   return "MOD_2_RS422DB25";
	case MOD_RS232DB25MALE: return "MOD_RS232DB25MALE";
	case MOD_2_PARALLEL:    return "MOD_2_PARALLEL";
	case MOD_BLANK:         return "empty";
	default:return "invalid";
	}
}


static int mod_compat_type (int module_type)
{
	return module_type >> 4;
}

static void sx_reconfigure_port(struct sx_port *port)
{
	if (sx_read_channel_byte (port, hi_hstat) == HS_IDLE_OPEN) {
		if (sx_send_command (port, HS_CONFIG, -1, HS_IDLE_OPEN) != 1) {
			printk (KERN_WARNING "sx: Sent reconfigure command, but card didn't react.\n");
		}
	} else {
		sx_dprintk (SX_DEBUG_TERMIOS, 
		            "sx: Not sending reconfigure: port isn't open (%02x).\n", 
		            sx_read_channel_byte (port, hi_hstat));
	}	
}

static void sx_setsignals (struct sx_port *port, int dtr, int rts)
{
	int t;
	func_enter2 ();

	t = sx_read_channel_byte (port, hi_op);
	if (dtr >= 0) t = dtr? (t | OP_DTR): (t & ~OP_DTR);
	if (rts >= 0) t = rts? (t | OP_RTS): (t & ~OP_RTS);
	sx_write_channel_byte (port, hi_op, t);
	sx_dprintk (SX_DEBUG_MODEMSIGNALS, "setsignals: %d/%d\n", dtr, rts);

	func_exit ();
}



static int sx_getsignals (struct sx_port *port)
{
	int i_stat,o_stat;

	o_stat = sx_read_channel_byte (port, hi_op);
	i_stat = sx_read_channel_byte (port, hi_ip);

	sx_dprintk (SX_DEBUG_MODEMSIGNALS, "getsignals: %d/%d  (%d/%d) %02x/%02x\n",
	            (o_stat & OP_DTR) != 0, (o_stat & OP_RTS) != 0,
	            port->c_dcd, sx_get_CD (port),
	            sx_read_channel_byte (port, hi_ip),
	            sx_read_channel_byte (port, hi_state));

	return (((o_stat & OP_DTR)?TIOCM_DTR:0) |
	        ((o_stat & OP_RTS)?TIOCM_RTS:0) |
	        ((i_stat & IP_CTS)?TIOCM_CTS:0) |
	        ((i_stat & IP_DCD)?TIOCM_CAR:0) |
	        ((i_stat & IP_DSR)?TIOCM_DSR:0) |
	        ((i_stat & IP_RI)?TIOCM_RNG:0)
	        );
}


static void sx_set_baud (struct sx_port *port)
{
	int t;

	if (port->board->ta_type == MOD_SXDC) {
		switch (port->gs.baud) {
		  /* Save some typing work... */
#define e(x) case x:t= BAUD_ ## x ; break
			e(50);e(75);e(110);e(150);e(200);e(300);e(600);
                        e(1200);e(1800);e(2000);e(2400);e(4800);e(7200);
                        e(9600);e(14400);e(19200);e(28800);e(38400);
                        e(56000);e(57600);e(64000);e(76800);e(115200);
			e(128000);e(150000);e(230400);e(256000);e(460800);
                        e(921600);
		case 134    :t = BAUD_134_5;   break;
		case 0      :t = -1;
								 break;
		default:
			/* Can I return "invalid"? */
			t = BAUD_9600;
			printk (KERN_INFO "sx: unsupported baud rate: %d.\n", port->gs.baud);
			break;
		}
#undef e
		if (t > 0) {
			/* The baud rate is not set to 0, so we're enabeling DTR... -- REW */
			sx_setsignals (port, 1, -1); 
			/* XXX This is not TA & MTA compatible */
			sx_write_channel_byte (port, hi_csr, 0xff);

			sx_write_channel_byte (port, hi_txbaud, t);
			sx_write_channel_byte (port, hi_rxbaud, t);
		} else {
			sx_setsignals (port, 0, -1);
		}
	} else {
		switch (port->gs.baud) {
#define e(x) case x:t= CSR_ ## x ; break
			e(75);e(150);e(300);e(600);e(1200);e(2400);e(4800);
                        e(1800);e(9600);
			e(19200);e(57600);e(38400);
			/* TA supports 110, but not 115200, MTA supports 115200, but not 110 */
		case 110: 
			if (port->board->ta_type == MOD_TA) {
				t = CSR_110;
				break;
			} else {
				t = CSR_9600;
				printk (KERN_INFO "sx: Unsupported baud rate: %d.\n", port->gs.baud);
				break;
			}
		case 115200: 
			if (port->board->ta_type == MOD_TA) {
				t = CSR_9600;
				printk (KERN_INFO "sx: Unsupported baud rate: %d.\n", port->gs.baud);
				break;
			} else {
				t = CSR_110;
				break;
			}
		case 0      :t = -1;
								 break;
		default:
			t = CSR_9600;
			printk (KERN_INFO "sx: Unsupported baud rate: %d.\n", port->gs.baud);
			break;
		}
#undef e
		if (t >= 0) {
			sx_setsignals (port, 1, -1);
			sx_write_channel_byte (port, hi_csr, t * 0x11);
		} else {
			sx_setsignals (port, 0, -1);
		}
	}
}


/* Simon Allen's version of this routine was 225 lines long. 85 is a lot
   better. -- REW */

static int sx_set_real_termios (void *ptr)
{
	struct sx_port *port = ptr;

	func_enter2();

	if (!port->gs.tty)
		return 0;

	/* What is this doing here? -- REW
	   Ha! figured it out. It is to allow you to get DTR active again
	   if you've dropped it with stty 0. Moved to set_baud, where it
	   belongs (next to the drop dtr if baud == 0) -- REW */
	/* sx_setsignals (port, 1, -1); */

	sx_set_baud (port);

#define CFLAG port->gs.tty->termios->c_cflag
	sx_write_channel_byte (port, hi_mr1,
	                       (C_PARENB (port->gs.tty)? MR1_WITH:MR1_NONE) |
	                       (C_PARODD (port->gs.tty)? MR1_ODD:MR1_EVEN) |
	                       (C_CRTSCTS(port->gs.tty)? MR1_RTS_RXFLOW:0) |
	                       (((CFLAG & CSIZE)==CS8) ? MR1_8_BITS:0) |
	                       (((CFLAG & CSIZE)==CS7) ? MR1_7_BITS:0) |
	                       (((CFLAG & CSIZE)==CS6) ? MR1_6_BITS:0) |
	                       (((CFLAG & CSIZE)==CS5) ? MR1_5_BITS:0) );

	sx_write_channel_byte (port, hi_mr2,
	                       (C_CRTSCTS(port->gs.tty)?MR2_CTS_TXFLOW:0) |
	                       (C_CSTOPB (port->gs.tty)?MR2_2_STOP:MR2_1_STOP));

	switch (CFLAG & CSIZE) {
	case CS8:sx_write_channel_byte (port, hi_mask, 0xff);break;
	case CS7:sx_write_channel_byte (port, hi_mask, 0x7f);break;
	case CS6:sx_write_channel_byte (port, hi_mask, 0x3f);break;
	case CS5:sx_write_channel_byte (port, hi_mask, 0x1f);break;
	default:
		printk (KERN_INFO "sx: Invalid wordsize: %d\n", CFLAG & CSIZE);
		break;
	}

	sx_write_channel_byte (port, hi_prtcl, 
	                       (I_IXON   (port->gs.tty)?SP_TXEN:0) |
	                       (I_IXOFF  (port->gs.tty)?SP_RXEN:0) |
	                       (I_IXANY  (port->gs.tty)?SP_TANY:0) |
	                       SP_DCEN);

	sx_write_channel_byte (port, hi_break, 
	                       (I_IGNBRK(port->gs.tty)?BR_IGN:0 |
	                        I_BRKINT(port->gs.tty)?BR_INT:0));

	sx_write_channel_byte (port, hi_txon,  START_CHAR (port->gs.tty));
	sx_write_channel_byte (port, hi_rxon,  START_CHAR (port->gs.tty));
	sx_write_channel_byte (port, hi_txoff, STOP_CHAR  (port->gs.tty));
	sx_write_channel_byte (port, hi_rxoff, STOP_CHAR  (port->gs.tty));

	sx_reconfigure_port(port);

	/* Tell line discipline whether we will do input cooking */
	if(I_OTHER(port->gs.tty)) {
		clear_bit(TTY_HW_COOK_IN, &port->gs.tty->flags);
	} else {
		set_bit(TTY_HW_COOK_IN, &port->gs.tty->flags);
	}
	sx_dprintk (SX_DEBUG_TERMIOS, "iflags: %x(%d) ", 
	            port->gs.tty->termios->c_iflag, 
	            I_OTHER(port->gs.tty));


/* Tell line discipline whether we will do output cooking.
 * If OPOST is set and no other output flags are set then we can do output
 * processing.  Even if only *one* other flag in the O_OTHER group is set
 * we do cooking in software.
 */
	if(O_OPOST(port->gs.tty) && !O_OTHER(port->gs.tty)) {
		set_bit(TTY_HW_COOK_OUT, &port->gs.tty->flags);
	} else {
		clear_bit(TTY_HW_COOK_OUT, &port->gs.tty->flags);
	}
	sx_dprintk (SX_DEBUG_TERMIOS, "oflags: %x(%d)\n", 
	            port->gs.tty->termios->c_oflag, 
	            O_OTHER(port->gs.tty));
	/* port->c_dcd = sx_get_CD (port); */
	func_exit ();
	return 0;
}



/* ********************************************************************** *
 *                   the interrupt related routines                       *
 * ********************************************************************** */

/* Note:
   Other drivers use the macro "MIN" to calculate how much to copy.
   This has the disadvantage that it will evaluate parts twice. That's
   expensive when it's IO (and the compiler cannot optimize those away!).
   Moreover, I'm not sure that you're race-free. 

   I assign a value, and then only allow the value to decrease. This
   is always safe. This makes the code a few lines longer, and you
   know I'm dead against that, but I think it is required in this
   case.  */


static void sx_transmit_chars (struct sx_port *port)
{
	int c;
	int tx_ip;
	int txroom;

	func_enter2 ();
	sx_dprintk (SX_DEBUG_TRANSMIT, "Port %p: transmit %d chars\n", 
	            port, port->gs.xmit_cnt);

	if (test_and_set_bit (SX_PORT_TRANSMIT_LOCK, &port->locks)) {
		return;
	}

	while (1) {
		c = port->gs.xmit_cnt;

		sx_dprintk (SX_DEBUG_TRANSMIT, "Copying %d ", c);
		tx_ip  = sx_read_channel_byte (port, hi_txipos);

		/* Took me 5 minutes to deduce this formula. 
		   Luckily it is literally in the manual in section 6.5.4.3.5 */
		txroom = (sx_read_channel_byte (port, hi_txopos) - tx_ip - 1) & 0xff;

		/* Don't copy more bytes than there is room for in the buffer */
		if (c > txroom)
			c = txroom;
		sx_dprintk (SX_DEBUG_TRANSMIT, " %d(%d) ", c, txroom );

		/* Don't copy past the end of the hardware transmit buffer */
		if (c > 0x100 - tx_ip) 
			c = 0x100 - tx_ip;

		sx_dprintk (SX_DEBUG_TRANSMIT, " %d(%d) ", c, 0x100-tx_ip );

		/* Don't copy pas the end of the source buffer */
		if (c > SERIAL_XMIT_SIZE - port->gs.xmit_tail) 
			c = SERIAL_XMIT_SIZE - port->gs.xmit_tail;

		sx_dprintk (SX_DEBUG_TRANSMIT, " %d(%ld) \n", 
		            c, SERIAL_XMIT_SIZE- port->gs.xmit_tail);

		/* If for one reason or another, we can't copy more data, we're done! */
		if (c == 0) break;


		memcpy_toio (port->board->base + CHAN_OFFSET(port,hi_txbuf) + tx_ip, 
		             port->gs.xmit_buf + port->gs.xmit_tail, c);

		/* Update the pointer in the card */
		sx_write_channel_byte (port, hi_txipos, (tx_ip+c) & 0xff);

		/* Update the kernel buffer end */
		port->gs.xmit_tail = (port->gs.xmit_tail + c) & (SERIAL_XMIT_SIZE-1);

		/* This one last. (this is essential)
		   It would allow others to start putting more data into the buffer! */
		port->gs.xmit_cnt -= c;
	}

	if (port->gs.xmit_cnt == 0) {
		sx_disable_tx_interrupts (port);
	}

	if ((port->gs.xmit_cnt <= port->gs.wakeup_chars) && port->gs.tty) {
		if ((port->gs.tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
		    port->gs.tty->ldisc.write_wakeup)
			(port->gs.tty->ldisc.write_wakeup)(port->gs.tty);
		sx_dprintk (SX_DEBUG_TRANSMIT, "Waking up.... ldisc (%d)....\n",
		            port->gs.wakeup_chars); 
		wake_up_interruptible(&port->gs.tty->write_wait);
	}

	clear_bit (SX_PORT_TRANSMIT_LOCK, &port->locks);
	func_exit ();
}


/* Note the symmetry between receiving chars and transmitting them!
   Note: The kernel should have implemented both a receive buffer and
   a transmit buffer. */

/* Inlined: Called only once. Remove the inline when you add another call */
static inline void sx_receive_chars (struct sx_port *port)
{
	int c;
	int rx_op;
	struct tty_struct *tty;
	int copied=0;

	func_enter2 ();
	tty = port->gs.tty;
	while (1) {
		rx_op = sx_read_channel_byte (port, hi_rxopos);
		c = (sx_read_channel_byte (port, hi_rxipos) - rx_op) & 0xff;

		sx_dprintk (SX_DEBUG_RECEIVE, "rxop=%d, c = %d.\n", rx_op, c); 

		/* Don't copy more bytes than there is room for in the buffer */
		if (tty->flip.count + c > TTY_FLIPBUF_SIZE) 
			c = TTY_FLIPBUF_SIZE - tty->flip.count;

		sx_dprintk (SX_DEBUG_RECEIVE, "c = %d.\n", c); 

		/* Don't copy past the end of the hardware receive buffer */
		if (rx_op + c > 0x100) c = 0x100 - rx_op;

		sx_dprintk (SX_DEBUG_RECEIVE, "c = %d.\n", c);

		/* If for one reason or another, we can't copy more data, we're done! */
		if (c == 0) break;

		sx_dprintk (SX_DEBUG_RECEIVE , "Copying over %d chars. First is %d at %lx\n", c, 
		            read_sx_byte (port->board, CHAN_OFFSET(port,hi_rxbuf) + rx_op),
		            CHAN_OFFSET(port, hi_rxbuf)); 
		memcpy_fromio (tty->flip.char_buf_ptr, 
		               port->board->base + CHAN_OFFSET(port,hi_rxbuf) + rx_op, c);
		memset(tty->flip.flag_buf_ptr, TTY_NORMAL, c);

		/* Update the kernel buffer end */
		tty->flip.count += c;
		tty->flip.char_buf_ptr += c;
		tty->flip.flag_buf_ptr += c;

		/* This one last. ( Not essential.)
		   It allows the card to start putting more data into the buffer! 
		   Update the pointer in the card */
		sx_write_channel_byte (port, hi_rxopos, (rx_op + c) & 0xff);

		copied += c;
	}
	if (copied) {
		struct timeval tv;

		do_gettimeofday (&tv);
		sx_dprintk (SX_DEBUG_RECEIVE, 
		            "pushing flipq port %d (%3d chars): %d.%06d  (%d/%d)\n", 
		            port->line, copied, 
		            (int) (tv.tv_sec % 60), (int)tv.tv_usec, tty->raw, tty->real_raw);

		/* Tell the rest of the system the news. Great news. New characters! */
		tty_flip_buffer_push (tty);
		/*    tty_schedule_flip (tty); */
	}

	func_exit ();
}

/* Inlined: it is called only once. Remove the inline if you add another 
   call */
static inline void sx_check_modem_signals (struct sx_port *port)
{
	int hi_state;
	int c_dcd;

	hi_state = sx_read_channel_byte (port, hi_state);
	sx_dprintk (SX_DEBUG_MODEMSIGNALS, "Checking modem signals (%d/%d)\n",
	            port->c_dcd, sx_get_CD (port));

	if (hi_state & ST_BREAK) {
		hi_state &= ~ST_BREAK;
		sx_dprintk (SX_DEBUG_MODEMSIGNALS, "got a break.\n");

		sx_write_channel_byte (port, hi_state, hi_state);
Linus Torvalds's avatar
Linus Torvalds committed
1159
		gs_got_break (&port->gs);
Linus Torvalds's avatar
Linus Torvalds committed
1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171 1172
	}
	if (hi_state & ST_DCD) {
		hi_state &= ~ST_DCD;
		sx_dprintk (SX_DEBUG_MODEMSIGNALS, "got a DCD change.\n");
		sx_write_channel_byte (port, hi_state, hi_state);
		c_dcd = sx_get_CD (port);
		sx_dprintk (SX_DEBUG_MODEMSIGNALS, "DCD is now %d\n", c_dcd);
		if (c_dcd != port->c_dcd) {
			port->c_dcd = c_dcd;
			if (sx_get_CD (port)) {
				/* DCD went UP */
				if( (~(port->gs.flags & ASYNC_NORMAL_ACTIVE) || 
						 ~(port->gs.flags & ASYNC_CALLOUT_ACTIVE)) &&
1173 1174
						(sx_read_channel_byte(port, hi_hstat) != HS_IDLE_CLOSED) &&
						!(port->gs.tty->termios->c_cflag & CLOCAL) ) {
Linus Torvalds's avatar
Linus Torvalds committed
1175 1176 1177 1178 1179 1180 1181 1182 1183
					/* Are we blocking in open?*/
					sx_dprintk (SX_DEBUG_MODEMSIGNALS, "DCD active, unblocking open\n");
					wake_up_interruptible(&port->gs.open_wait);
				} else {
					sx_dprintk (SX_DEBUG_MODEMSIGNALS, "DCD raised. Ignoring.\n");
				}
			} else {
				/* DCD went down! */
				if (!((port->gs.flags & ASYNC_CALLOUT_ACTIVE) &&
1184 1185
				      (port->gs.flags & ASYNC_CALLOUT_NOHUP)) &&
				    !(port->gs.tty->termios->c_cflag & CLOCAL) ) {
Linus Torvalds's avatar
Linus Torvalds committed
1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 1262 1263 1264 1265 1266 1267 1268 1269 1270 1271 1272 1273 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284 1285 1286 1287 1288 1289 1290 1291 1292 1293 1294 1295 1296 1297 1298 1299 1300 1301 1302 1303 1304 1305 1306 1307 1308 1309 1310 1311 1312 1313 1314 1315 1316 1317 1318 1319 1320 1321 1322 1323 1324 1325 1326 1327 1328 1329 1330 1331 1332 1333 1334 1335 1336 1337 1338 1339 1340 1341 1342 1343 1344 1345 1346 1347 1348 1349 1350 1351 1352 1353 1354 1355 1356 1357 1358 1359 1360 1361 1362 1363 1364 1365 1366 1367 1368 1369 1370 1371 1372 1373 1374 1375 1376 1377 1378 1379 1380 1381 1382 1383 1384 1385 1386 1387 1388 1389 1390 1391 1392 1393 1394 1395 1396 1397 1398 1399 1400 1401 1402 1403 1404 1405 1406 1407 1408 1409 1410 1411 1412 1413 1414 1415 1416 1417 1418 1419 1420 1421 1422 1423 1424 1425 1426 1427 1428 1429 1430 1431 1432 1433 1434
					sx_dprintk (SX_DEBUG_MODEMSIGNALS, "DCD dropped. hanging up....\n");
					tty_hangup (port->gs.tty);
				} else {
					sx_dprintk (SX_DEBUG_MODEMSIGNALS, "DCD dropped. ignoring.\n");
				}
			}
		} else {
			sx_dprintk (SX_DEBUG_MODEMSIGNALS, "Hmmm. card told us DCD changed, but it didn't.\n");
		}
	}
}


/* This is what an interrupt routine should look like. 
 * Small, elegant, clear.
 */

static void sx_interrupt (int irq, void *ptr, struct pt_regs *regs)
{
	struct sx_board *board = ptr;
	struct sx_port *port;
	int i;

	/*   func_enter ();  */
	sx_dprintk (SX_DEBUG_FLOW, "sx: enter sx_interrupt (%d/%d)\n", irq, board->irq); 

	/* AAargh! The order in which to do these things is essential and
	   not trivial. 

	   - Rate limit goes before "recursive". Otherwise a series of
	     recursive calls will hang the machine in the interrupt routine. 

	   - hardware twiddling goes before "recursive". Otherwise when we
	     poll the card, and a recursive interrupt happens, we wont
	     ack the card, so it might keep on interrupting us. (especially
	     level sensitive interrupt systems like PCI).

	   - Rate limit goes before hardware twiddling. Otherwise we won't
	     catch a card that has gone bonkers.

	   - The "initialized" test goes after the hardware twiddling. Otherwise
	     the card will stick us in the interrupt routine again.

	   - The initialized test goes before recursive. 
	*/



#ifdef IRQ_RATE_LIMIT
	/* Aaargh! I'm ashamed. This costs more lines-of-code than the
	   actual interrupt routine!. (Well, used to when I wrote that comment) */
	{
		static int lastjif;
		static int nintr=0;

		if (lastjif == jiffies) {
			if (++nintr > IRQ_RATE_LIMIT) {
				free_irq (board->irq, board);
				printk (KERN_ERR "sx: Too many interrupts. Turning off interrupt %d.\n", 
					      board->irq);
			}
		} else {
			lastjif = jiffies;
			nintr = 0;
		}
	}
#endif


	if (board->irq == irq) {
		/* Tell the card we've noticed the interrupt. */

		sx_write_board_word (board, cc_int_pending, 0);
		if (IS_SX_BOARD (board)) {
			write_sx_byte (board, SX_RESET_IRQ, 1);
		} else if (IS_EISA_BOARD(board)) {
			inb(board->eisa_base+0xc03);
			write_sx_word(board, 8, 0); 
		} else {
			write_sx_byte (board, SI2_ISA_INTCLEAR, SI2_ISA_INTCLEAR_CLEAR);
			write_sx_byte (board, SI2_ISA_INTCLEAR, SI2_ISA_INTCLEAR_SET);
		}
	}

	if (!sx_initialized) return;
	if (!(board->flags & SX_BOARD_INITIALIZED)) return;

	if (test_and_set_bit (SX_BOARD_INTR_LOCK, &board->locks)) {
		printk (KERN_ERR "Recursive interrupt! (%d)\n", board->irq);
		return;
	}

	 for (i=0;i<board->nports;i++) {
		port = &board->ports[i];
		if (port->gs.flags & GS_ACTIVE) {
			if (sx_read_channel_byte (port, hi_state)) {
				sx_dprintk (SX_DEBUG_INTERRUPTS, 
				            "Port %d: modem signal change?... \n", i);
				sx_check_modem_signals (port); 
			}
			if (port->gs.xmit_cnt) {
				sx_transmit_chars (port);
			}
			if (!(port->gs.flags & SX_RX_THROTTLE)) {
				sx_receive_chars (port);
			}
		}
	}

	clear_bit (SX_BOARD_INTR_LOCK, &board->locks);

	sx_dprintk (SX_DEBUG_FLOW, "sx: exit sx_interrupt (%d/%d)\n", irq, board->irq); 
	/*  func_exit ();  */
}


static void sx_pollfunc (unsigned long data)
{
	struct sx_board *board = (struct sx_board *) data;

	func_enter ();

	sx_interrupt (0, board, NULL);

	init_timer(&board->timer);

	board->timer.expires = jiffies + sx_poll;
	add_timer (&board->timer);
	func_exit ();
}



/* ********************************************************************** *
 *                Here are the routines that actually                     *
 *              interface with the generic_serial driver                  *
 * ********************************************************************** */

/* Ehhm. I don't know how to fiddle with interrupts on the SX card. --REW */
/* Hmm. Ok I figured it out. You don't.  */

static void sx_disable_tx_interrupts (void * ptr) 
{
	struct sx_port *port = ptr; 
	func_enter2();

	port->gs.flags &= ~GS_TX_INTEN;

	func_exit();
}


static void sx_enable_tx_interrupts (void * ptr) 
{
	struct sx_port *port = ptr; 
	int data_in_buffer;
	func_enter2();

	/* First transmit the characters that we're supposed to */
	sx_transmit_chars (port);

	/* The sx card will never interrupt us if we don't fill the buffer
	   past 25%. So we keep considering interrupts off if that's the case. */
	data_in_buffer = (sx_read_channel_byte (port, hi_txipos) - 
	                  sx_read_channel_byte (port, hi_txopos)) & 0xff;

	/* XXX Must be "HIGH_WATER" for SI card according to doc. */
	if (data_in_buffer < LOW_WATER) 
		port->gs.flags &= ~GS_TX_INTEN;

	func_exit();
}


static void sx_disable_rx_interrupts (void * ptr) 
{
	/*  struct sx_port *port = ptr; */
	func_enter();

	func_exit();
}

static void sx_enable_rx_interrupts (void * ptr) 
{
	/*  struct sx_port *port = ptr; */
	func_enter();

	func_exit();
}


/* Jeez. Isn't this simple? */
static int sx_get_CD (void * ptr) 
{
	struct sx_port *port = ptr;
	func_enter2();

	func_exit();
	return ((sx_read_channel_byte (port, hi_ip) & IP_DCD) != 0);
}


/* Jeez. Isn't this simple? */
static int sx_chars_in_buffer (void * ptr) 
{
	struct sx_port *port = ptr;
	func_enter2();

	func_exit();
	return ((sx_read_channel_byte (port, hi_txipos) - 
	         sx_read_channel_byte (port, hi_txopos)) & 0xff);
}


static void sx_shutdown_port (void * ptr) 
{
	struct sx_port *port = ptr; 

	func_enter();

	port->gs.flags &= ~ GS_ACTIVE;
	if (port->gs.tty && (port->gs.tty->termios->c_cflag & HUPCL)) {
		sx_setsignals (port, 0, 0);
		sx_reconfigure_port(port);
	}

	func_exit();
}





/* ********************************************************************** *
 *                Here are the routines that actually                     *
 *               interface with the rest of the system                    *
 * ********************************************************************** */

static int sx_open  (struct tty_struct * tty, struct file * filp)
{
	struct sx_port *port;
	int retval, line;

	func_enter();

	if (!sx_initialized) {
		return -EIO;
	}

Linus Torvalds's avatar
Linus Torvalds committed
1435
	line = minor(tty->device);
Linus Torvalds's avatar
Linus Torvalds committed
1436 1437 1438 1439 1440 1441 1442 1443 1444 1445 1446 1447 1448 1449 1450 1451 1452 1453 1454 1455 1456 1457 1458 1459 1460 1461 1462 1463 1464 1465 1466 1467 1468 1469 1470 1471 1472 1473 1474 1475 1476 1477 1478 1479 1480 1481 1482 1483 1484 1485 1486 1487 1488 1489 1490 1491 1492 1493 1494 1495 1496 1497 1498 1499 1500 1501 1502 1503 1504 1505 1506 1507 1508 1509 1510 1511 1512 1513 1514 1515 1516 1517 1518 1519 1520 1521 1522 1523 1524 1525 1526 1527 1528 1529 1530 1531 1532 1533 1534 1535 1536 1537 1538 1539 1540 1541 1542 1543 1544 1545 1546 1547 1548 1549 1550 1551 1552 1553 1554 1555 1556 1557 1558 1559 1560 1561 1562 1563 1564 1565 1566 1567 1568 1569 1570 1571 1572 1573 1574 1575 1576 1577 1578 1579 1580 1581 1582 1583 1584 1585 1586 1587 1588 1589 1590 1591 1592 1593 1594 1595 1596 1597 1598 1599 1600 1601 1602 1603 1604 1605 1606 1607 1608 1609 1610 1611 1612 1613 1614 1615 1616 1617 1618 1619 1620 1621 1622 1623 1624 1625 1626 1627 1628 1629 1630 1631 1632 1633 1634 1635
	sx_dprintk (SX_DEBUG_OPEN, "%d: opening line %d. tty=%p ctty=%p, np=%d)\n", 
	            current->pid, line, tty, current->tty, sx_nports);

	if ((line < 0) || (line >= SX_NPORTS) || (line >= sx_nports))
		return -ENODEV;

	port = & sx_ports[line];
	port->c_dcd = 0; /* Make sure that the first interrupt doesn't detect a
	                    1 -> 0 transition. */


	sx_dprintk (SX_DEBUG_OPEN, "port = %p c_dcd = %d\n", port, port->c_dcd);

	tty->driver_data = port;
	port->gs.tty = tty;
	if (!port->gs.count)
		MOD_INC_USE_COUNT;
	port->gs.count++;

	sx_dprintk (SX_DEBUG_OPEN, "starting port\n");

	/*
	 * Start up serial port
	 */
	retval = gs_init_port(&port->gs);
	sx_dprintk (SX_DEBUG_OPEN, "done gs_init\n");
	if (retval) {
		port->gs.count--;
		if (port->gs.count) MOD_DEC_USE_COUNT;
		return retval;
	}

	port->gs.flags |= GS_ACTIVE;
	sx_setsignals (port, 1,1);

#if 0
	if (sx_debug & SX_DEBUG_OPEN)
		my_hd ((unsigned char *)port, sizeof (*port));
#else
	if (sx_debug & SX_DEBUG_OPEN)
		my_hd ((unsigned char *)port->board->base + port->ch_base, 
		       sizeof (*port));
#endif

	if (sx_send_command (port, HS_LOPEN, -1, HS_IDLE_OPEN) != 1) {
		printk (KERN_ERR "sx: Card didn't respond to LOPEN command.\n");
		port->gs.count--;
		if (!port->gs.count) MOD_DEC_USE_COUNT;
		return -EIO;
	}

	retval = gs_block_til_ready(port, filp);
	sx_dprintk (SX_DEBUG_OPEN, "Block til ready returned %d. Count=%d\n", 
	            retval, port->gs.count);

	if (retval) {
		/* 
		 * Don't lower gs.count here because sx_close() will be called later
		 */ 

		return retval;
	}
	/* tty->low_latency = 1; */

	if ((port->gs.count == 1) && (port->gs.flags & ASYNC_SPLIT_TERMIOS)) {
		if (tty->driver.subtype == SERIAL_TYPE_NORMAL)
			*tty->termios = port->gs.normal_termios;
		else 
			*tty->termios = port->gs.callout_termios;
		sx_set_real_termios (port);
	}

	port->gs.session = current->session;
	port->gs.pgrp = current->pgrp;
	port->c_dcd = sx_get_CD (port);
	sx_dprintk (SX_DEBUG_OPEN, "at open: cd=%d\n", port->c_dcd);
	func_exit();
	return 0;

}


/* I haven't the foggiest why the decrement use count has to happen
   here. The whole linux serial drivers stuff needs to be redesigned.
   My guess is that this is a hack to minimize the impact of a bug
   elsewhere. Thinking about it some more. (try it sometime) Try
   running minicom on a serial port that is driven by a modularized
   driver. Have the modem hangup. Then remove the driver module. Then
   exit minicom.  I expect an "oops".  -- REW */
static void sx_hungup (void *ptr)
{
  /*
	struct sx_port *port = ptr; 
  */
	func_enter ();

	/* Don't force the SX card to close. mgetty doesn't like it !!!!!! -- pvdl */
	/* For some reson we added this code. Don't know why anymore ;-( -- pvdl */
	/*
	sx_setsignals (port, 0, 0);
	sx_reconfigure_port(port);	
	sx_send_command (port, HS_CLOSE, 0, 0);

	if (sx_read_channel_byte (port, hi_hstat) != HS_IDLE_CLOSED) {
		if (sx_send_command (port, HS_FORCE_CLOSED, -1, HS_IDLE_CLOSED) != 1) {
			printk (KERN_ERR 
			        "sx: sent the force_close command, but card didn't react\n");
		} else
			sx_dprintk (SX_DEBUG_CLOSE, "sent the force_close command.\n");
	}
	*/
	MOD_DEC_USE_COUNT;
	func_exit ();
}


static void sx_close (void *ptr)
{
	struct sx_port *port = ptr; 
	/* Give the port 5 seconds to close down. */
	int to = 5 * HZ; 

	func_enter ();

	sx_setsignals (port, 0, 0);
	sx_reconfigure_port(port);	
	sx_send_command (port, HS_CLOSE, 0, 0);

	while (to-- && (sx_read_channel_byte (port, hi_hstat) != HS_IDLE_CLOSED)) {
		current->state = TASK_INTERRUPTIBLE;
		schedule_timeout (1);
		if (signal_pending (current))
				break;
	}
	current->state = TASK_RUNNING;
	if (sx_read_channel_byte (port, hi_hstat) != HS_IDLE_CLOSED) {
		if (sx_send_command (port, HS_FORCE_CLOSED, -1, HS_IDLE_CLOSED) != 1) {
			printk (KERN_ERR 
			        "sx: sent the force_close command, but card didn't react\n");
		} else
			sx_dprintk (SX_DEBUG_CLOSE, "sent the force_close command.\n");
	}

	sx_dprintk (SX_DEBUG_CLOSE, "waited %d jiffies for close. count=%d\n", 
	            5 * HZ - to - 1, port->gs.count);

	if(port->gs.count) {
		sx_dprintk(SX_DEBUG_CLOSE, "WARNING port count:%d\n", port->gs.count);
		port->gs.count = 0;
	}

	MOD_DEC_USE_COUNT;
	func_exit ();
}



/* This is relatively thorough. But then again it is only 20 lines. */
#define MARCHUP    for (i=min;i<max;i++) 
#define MARCHDOWN  for (i=max-1;i>=min;i--)
#define W0         write_sx_byte (board, i, 0x55)
#define W1         write_sx_byte (board, i, 0xaa)
#define R0         if (read_sx_byte (board, i) != 0x55) return 1
#define R1         if (read_sx_byte (board, i) != 0xaa) return 1

/* This memtest takes a human-noticable time. You normally only do it
   once a boot, so I guess that it is worth it. */
static int do_memtest (struct sx_board *board, int min, int max)
{
	int i;

	/* This is a marchb. Theoretically, marchb catches much more than
	   simpler tests. In practise, the longer test just catches more
	   intermittent errors. -- REW
	   (For the theory behind memory testing see: 
	   Testing Semiconductor Memories by A.J. van de Goor.) */
	MARCHUP	 {W0;}
	MARCHUP   {R0;W1;R1;W0;R0;W1;}
	MARCHUP   {R1;W0;W1;}
	MARCHDOWN {R1;W0;W1;W0;}
	MARCHDOWN {R0;W1;W0;}

	return 0;
}


#undef MARCHUP
#undef MARCHDOWN
#undef W0
#undef W1
#undef R0
#undef R1

#define MARCHUP    for (i=min;i<max;i+=2) 
#define MARCHDOWN  for (i=max-1;i>=min;i-=2)
#define W0         write_sx_word (board, i, 0x55aa)
#define W1         write_sx_word (board, i, 0xaa55)
#define R0         if (read_sx_word (board, i) != 0x55aa) return 1
#define R1         if (read_sx_word (board, i) != 0xaa55) return 1

Linus Torvalds's avatar
Linus Torvalds committed
1636
#if 0
Linus Torvalds's avatar
Linus Torvalds committed
1637 1638 1639 1640 1641 1642 1643 1644 1645 1646 1647 1648 1649 1650
/* This memtest takes a human-noticable time. You normally only do it
   once a boot, so I guess that it is worth it. */
static int do_memtest_w (struct sx_board *board, int min, int max)
{
	int i;

	MARCHUP   {W0;}
	MARCHUP   {R0;W1;R1;W0;R0;W1;}
	MARCHUP   {R1;W0;W1;}
	MARCHDOWN {R1;W0;W1;W0;}
	MARCHDOWN {R0;W1;W0;}

	return 0;
}
Linus Torvalds's avatar
Linus Torvalds committed
1651
#endif
Linus Torvalds's avatar
Linus Torvalds committed
1652 1653 1654 1655 1656 1657 1658 1659


static int sx_fw_ioctl (struct inode *inode, struct file *filp,
                        unsigned int cmd, unsigned long arg)
{
	int rc = 0;
	int *descr = (int *)arg, i;
	static struct sx_board *board = NULL;
Linus Torvalds's avatar
Linus Torvalds committed
1660 1661
	int nbytes, offset;
	unsigned long data;
Linus Torvalds's avatar
Linus Torvalds committed
1662 1663 1664 1665 1666 1667 1668
	char *tmp;

	func_enter();

#if 0 
	/* Removed superuser check: Sysops can use the permissions on the device
	   file to restrict access. Recommendation: Root only. (root.root 600) */
Linus Torvalds's avatar
Linus Torvalds committed
1669
	if (!capable(CAP_SYS_ADMIN)) {
Linus Torvalds's avatar
Linus Torvalds committed
1670 1671 1672 1673 1674 1675 1676 1677 1678 1679 1680 1681 1682 1683 1684 1685 1686 1687 1688 1689 1690 1691
		return -EPERM;
	}
#endif

	sx_dprintk (SX_DEBUG_FIRMWARE, "IOCTL %x: %lx\n", cmd, arg);

	if (!board) board = &boards[0];
	if (board->flags & SX_BOARD_PRESENT) {
		sx_dprintk (SX_DEBUG_FIRMWARE, "Board present! (%x)\n", 
		            board->flags);
	} else {
		sx_dprintk (SX_DEBUG_FIRMWARE, "Board not present! (%x) all:", 
		            board->flags);
		for (i=0;i< SX_NBOARDS;i++)
			sx_dprintk (SX_DEBUG_FIRMWARE, "<%x> ", boards[i].flags);
		sx_dprintk (SX_DEBUG_FIRMWARE, "\n");
		return -EIO;
	}

	switch (cmd) {
	case SXIO_SET_BOARD:
		sx_dprintk (SX_DEBUG_FIRMWARE, "set board to %ld\n", arg);
1692
		if (arg >= SX_NBOARDS) return -EIO;
Linus Torvalds's avatar
Linus Torvalds committed
1693 1694 1695 1696 1697 1698 1699 1700 1701 1702
		sx_dprintk (SX_DEBUG_FIRMWARE, "not out of range\n");
		if (!(boards[arg].flags	& SX_BOARD_PRESENT)) return -EIO;
		sx_dprintk (SX_DEBUG_FIRMWARE, ".. and present!\n");
		board = &boards[arg];
		break;
	case SXIO_GET_TYPE:
		rc = -ENOENT; /* If we manage to miss one, return error. */
		if (IS_SX_BOARD (board)) rc = SX_TYPE_SX;
		if (IS_CF_BOARD (board)) rc = SX_TYPE_CF;
		if (IS_SI_BOARD (board)) rc = SX_TYPE_SI;
1703
		if (IS_SI1_BOARD (board)) rc = SX_TYPE_SI;
Linus Torvalds's avatar
Linus Torvalds committed
1704 1705 1706 1707 1708 1709 1710 1711 1712 1713 1714 1715 1716 1717 1718 1719 1720 1721 1722 1723 1724 1725 1726 1727 1728 1729 1730 1731 1732 1733
		if (IS_EISA_BOARD (board)) rc = SX_TYPE_SI;
		sx_dprintk (SX_DEBUG_FIRMWARE, "returning type= %d\n", rc);
		break;
	case SXIO_DO_RAMTEST:
		if (sx_initialized) /* Already initialized: better not ramtest the board.  */
			return -EPERM;
		if (IS_SX_BOARD (board)) {
			rc          = do_memtest   (board, 0, 0x7000);
			if (!rc) rc = do_memtest   (board, 0, 0x7000);
			/*if (!rc) rc = do_memtest_w (board, 0, 0x7000);*/
		} else {
			rc             = do_memtest   (board, 0, 0x7ff8);
			/* if (!rc) rc = do_memtest_w (board, 0, 0x7ff8); */
		}
		sx_dprintk (SX_DEBUG_FIRMWARE, "returning memtest result= %d\n", rc);
		break;
	case SXIO_DOWNLOAD:
		if (sx_initialized) /* Already initialized */
			return -EEXIST;
		if (!sx_reset (board)) 
			return -EIO;
		sx_dprintk (SX_DEBUG_INIT, "reset the board...\n");

		tmp = kmalloc (SX_CHUNK_SIZE, GFP_USER);
		if (!tmp) return -ENOMEM;
		Get_user (nbytes, descr++);
		Get_user (offset, descr++); 
		Get_user (data,	 descr++);
		while (nbytes && data) {
			for (i=0;i<nbytes;i += SX_CHUNK_SIZE) {
Arnaldo Carvalho de Melo's avatar
Arnaldo Carvalho de Melo committed
1734 1735 1736 1737 1738
				if (copy_from_user(tmp, (char *)data + i, 
						   (i + SX_CHUNK_SIZE >
						    nbytes) ? nbytes - i :
						   	      SX_CHUNK_SIZE))
					return -EFAULT;
Linus Torvalds's avatar
Linus Torvalds committed
1739 1740 1741 1742 1743 1744 1745 1746 1747 1748 1749 1750 1751 1752 1753 1754 1755 1756 1757 1758 1759 1760 1761 1762 1763 1764 1765 1766 1767 1768 1769 1770 1771 1772 1773 1774 1775 1776 1777 1778 1779 1780 1781 1782 1783 1784 1785 1786 1787 1788 1789 1790 1791 1792
				memcpy_toio    ((char *) (board->base2 + offset + i), tmp, 
				                (i+SX_CHUNK_SIZE>nbytes)?nbytes-i:SX_CHUNK_SIZE);
			}

			Get_user (nbytes, descr++);
			Get_user (offset, descr++); 
			Get_user (data,   descr++);
		}
		kfree (tmp);
		sx_nports += sx_init_board (board);
		rc = sx_nports;
		break;
	case SXIO_INIT:
		if (sx_initialized) /* Already initialized */
			return -EEXIST;
		/* This is not allowed until all boards are initialized... */
		for (i=0;i<SX_NBOARDS;i++) {
			if ( (boards[i].flags & SX_BOARD_PRESENT) &&
			     !(boards[i].flags & SX_BOARD_INITIALIZED))
				return -EIO;
		}
		for (i=0;i<SX_NBOARDS;i++)
			if (!(boards[i].flags & SX_BOARD_PRESENT)) break;

		sx_dprintk (SX_DEBUG_FIRMWARE, "initing portstructs, %d boards, "
		            "%d channels, first board: %d ports\n", 
		            i, sx_nports, boards[0].nports);
		rc = sx_init_portstructs (i, sx_nports);
		sx_init_drivers ();
		if (rc >= 0) 
			sx_initialized++;
		break;
	case SXIO_SETDEBUG:
		sx_debug = arg;
		break;
	case SXIO_GETDEBUG:
		rc = sx_debug;
		break;
	case SXIO_GETGSDEBUG:
	case SXIO_SETGSDEBUG:
		rc = -EINVAL;
		break;
	case SXIO_GETNPORTS:
		rc = sx_nports;
		break;
	default:
		printk (KERN_WARNING "Unknown ioctl on firmware device (%x).\n", cmd);
		break;
	}
	func_exit ();
	return rc;
}


Linus Torvalds's avatar
Linus Torvalds committed
1793 1794 1795 1796 1797 1798 1799 1800 1801 1802 1803 1804 1805 1806
static void sx_break (struct tty_struct * tty, int flag)
{
	struct sx_port *port = tty->driver_data;
	int rv;

	if (flag) 
		rv = sx_send_command (port, HS_START, -1, HS_IDLE_BREAK);
	else 
		rv = sx_send_command (port, HS_STOP, -1, HS_IDLE_OPEN);
	if (rv != 1) printk (KERN_ERR "sx: couldn't send break (%x).\n",
			read_sx_byte (port->board, CHAN_OFFSET (port, hi_hstat)));
}


Linus Torvalds's avatar
Linus Torvalds committed
1807 1808 1809 1810 1811 1812 1813 1814 1815 1816 1817 1818 1819 1820 1821 1822 1823 1824 1825 1826 1827 1828 1829 1830 1831 1832 1833
static int sx_ioctl (struct tty_struct * tty, struct file * filp, 
                     unsigned int cmd, unsigned long arg)
{
	int rc;
	struct sx_port *port = tty->driver_data;
	int ival;

	/* func_enter2(); */

	rc = 0;
	switch (cmd) {
	case TIOCGSOFTCAR:
		rc = Put_user(((tty->termios->c_cflag & CLOCAL) ? 1 : 0),
		              (unsigned int *) arg);
		break;
	case TIOCSSOFTCAR:
		if ((rc = verify_area(VERIFY_READ, (void *) arg,
		                      sizeof(int))) == 0) {
			Get_user(ival, (unsigned int *) arg);
			tty->termios->c_cflag =
				(tty->termios->c_cflag & ~CLOCAL) |
				(ival ? CLOCAL : 0);
		}
		break;
	case TIOCGSERIAL:
		if ((rc = verify_area(VERIFY_WRITE, (void *) arg,
		                      sizeof(struct serial_struct))) == 0)
1834
			rc = gs_getserial(&port->gs, (struct serial_struct *) arg);
Linus Torvalds's avatar
Linus Torvalds committed
1835 1836 1837 1838 1839 1840 1841 1842 1843 1844 1845 1846 1847 1848 1849 1850 1851 1852 1853 1854 1855 1856 1857 1858 1859 1860 1861 1862 1863 1864 1865 1866 1867 1868 1869 1870 1871 1872 1873 1874 1875 1876 1877 1878 1879 1880 1881 1882 1883 1884 1885 1886 1887 1888 1889 1890 1891 1892 1893 1894 1895 1896 1897 1898 1899 1900 1901 1902 1903 1904 1905 1906 1907 1908 1909 1910 1911 1912 1913 1914 1915 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1943 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 2026 2027 2028 2029 2030 2031 2032 2033 2034 2035 2036 2037 2038 2039 2040 2041 2042 2043 2044 2045 2046 2047 2048 2049 2050 2051 2052 2053 2054 2055 2056 2057 2058 2059 2060 2061 2062 2063 2064 2065 2066 2067 2068 2069 2070 2071 2072 2073 2074 2075 2076 2077 2078 2079 2080 2081 2082 2083 2084 2085 2086 2087 2088 2089 2090 2091 2092 2093 2094 2095 2096 2097 2098 2099 2100 2101 2102 2103 2104 2105 2106 2107 2108 2109 2110 2111 2112 2113 2114 2115 2116 2117 2118 2119 2120 2121 2122 2123
		break;
	case TIOCSSERIAL:
		if ((rc = verify_area(VERIFY_READ, (void *) arg,
		                      sizeof(struct serial_struct))) == 0)
			rc = gs_setserial(&port->gs, (struct serial_struct *) arg);
		break;
	case TIOCMGET:
		if ((rc = verify_area(VERIFY_WRITE, (void *) arg,
		                      sizeof(unsigned int))) == 0) {
			ival = sx_getsignals(port);
			put_user(ival, (unsigned int *) arg);
		}
		break;
	case TIOCMBIS:
		if ((rc = verify_area(VERIFY_READ, (void *) arg,
		                      sizeof(unsigned int))) == 0) {
			Get_user(ival, (unsigned int *) arg);
			sx_setsignals(port, ((ival & TIOCM_DTR) ? 1 : -1),
			                     ((ival & TIOCM_RTS) ? 1 : -1));
			sx_reconfigure_port(port);
		}
		break;
	case TIOCMBIC:
		if ((rc = verify_area(VERIFY_READ, (void *) arg,
		                      sizeof(unsigned int))) == 0) {
			Get_user(ival, (unsigned int *) arg);
			sx_setsignals(port, ((ival & TIOCM_DTR) ? 0 : -1),
			                     ((ival & TIOCM_RTS) ? 0 : -1));
			sx_reconfigure_port(port);
		}
		break;
	case TIOCMSET:
		if ((rc = verify_area(VERIFY_READ, (void *) arg,
		                      sizeof(unsigned int))) == 0) {
			Get_user(ival, (unsigned int *) arg);
			sx_setsignals(port, ((ival & TIOCM_DTR) ? 1 : 0),
			                     ((ival & TIOCM_RTS) ? 1 : 0));
			sx_reconfigure_port(port);
		}
		break;
	default:
		rc = -ENOIOCTLCMD;
		break;
	}

	/* func_exit(); */
	return rc;
}


/* The throttle/unthrottle scheme for the Specialix card is different
 * from other drivers and deserves some explanation. 
 * The Specialix hardware takes care of XON/XOFF
 * and CTS/RTS flow control itself.  This means that all we have to
 * do when signalled by the upper tty layer to throttle/unthrottle is
 * to make a note of it here.  When we come to read characters from the
 * rx buffers on the card (sx_receive_chars()) we look to see if the
 * upper layer can accept more (as noted here in sx_rx_throt[]). 
 * If it can't we simply don't remove chars from the cards buffer. 
 * When the tty layer can accept chars, we again note that here and when
 * sx_receive_chars() is called it will remove them from the cards buffer.
 * The card will notice that a ports buffer has drained below some low
 * water mark and will unflow control the line itself, using whatever
 * flow control scheme is in use for that port. -- Simon Allen
 */

static void sx_throttle (struct tty_struct * tty)
{
	struct sx_port *port = (struct sx_port *)tty->driver_data;

	func_enter2();
	/* If the port is using any type of input flow
	 * control then throttle the port.
	 */
	if((tty->termios->c_cflag & CRTSCTS) || (I_IXOFF(tty)) ) {
		port->gs.flags |= SX_RX_THROTTLE;
	}
	func_exit();
}


static void sx_unthrottle (struct tty_struct * tty)
{
	struct sx_port *port = (struct sx_port *)tty->driver_data;

	func_enter2();
	/* Always unthrottle even if flow control is not enabled on
	 * this port in case we disabled flow control while the port
	 * was throttled
	 */
	port->gs.flags &= ~SX_RX_THROTTLE;
	func_exit();
	return;
}


/* ********************************************************************** *
 *                    Here are the initialization routines.               *
 * ********************************************************************** */




static int sx_init_board (struct sx_board *board)
{
	int addr;
	int chans;
	int type;

	func_enter();

	/* This is preceded by downloading the download code. */

	board->flags |= SX_BOARD_INITIALIZED;

	if (read_sx_byte (board, 0))
		/* CF boards may need this. */
		write_sx_byte(board,0, 0);

	/* This resets the processor again, to make sure it didn't do any
	   foolish things while we were downloading the image */
	if (!sx_reset (board))
		return 0;

	sx_start_board (board);
	udelay (10);
	if (!sx_busy_wait_neq (board, 0, 0xff, 0)) {
		printk (KERN_ERR "sx: Ooops. Board won't initialize.\n");
		return 0;
	}

	/* Ok. So now the processor on the card is running. It gathered
	   some info for us... */
	sx_dprintk (SX_DEBUG_INIT, "The sxcard structure:\n");
	if (sx_debug & SX_DEBUG_INIT) my_hd ((char *)(board->base), 0x10);
	sx_dprintk (SX_DEBUG_INIT, "the first sx_module structure:\n");
	if (sx_debug & SX_DEBUG_INIT) my_hd ((char *)(board->base + 0x80), 0x30);

	sx_dprintk (SX_DEBUG_INIT, 
	            "init_status: %x, %dk memory, firmware V%x.%02x,\n", 
	            read_sx_byte (board, 0), read_sx_byte(board, 1), 
	            read_sx_byte (board, 5), read_sx_byte(board, 4));

	if (read_sx_byte (board, 0) == 0xff) {
		printk (KERN_INFO "sx: No modules found. Sorry.\n");
		board->nports = 0;
		return 0;
	}

	chans = 0;

	if (IS_SX_BOARD(board)) {
		sx_write_board_word (board, cc_int_count, sx_maxints);
	} else {
		if (sx_maxints)
			sx_write_board_word (board, cc_int_count, SI_PROCESSOR_CLOCK/8/sx_maxints);
	}

	/* grab the first module type... */
	/*  board->ta_type = mod_compat_type (read_sx_byte (board, 0x80 + 0x08)); */
	board->ta_type = mod_compat_type (sx_read_module_byte (board, 0x80, mc_chip));

	/* XXX byteorder */
	for (addr = 0x80;addr != 0;addr = read_sx_word (board, addr) & 0x7fff) {
		type = sx_read_module_byte (board, addr, mc_chip);
		sx_dprintk (SX_DEBUG_INIT, "Module at %x: %d channels\n", 
		            addr, read_sx_byte (board, addr + 2));

		chans += sx_read_module_byte (board, addr, mc_type);

		sx_dprintk (SX_DEBUG_INIT, "module is an %s, which has %s/%s panels\n", 
		            mod_type_s (type),
		            pan_type_s (sx_read_module_byte (board, addr, mc_mods) & 0xf),
		            pan_type_s (sx_read_module_byte (board, addr, mc_mods) >> 4));

		sx_dprintk (SX_DEBUG_INIT, "CD1400 versions: %x/%x, ASIC version: %x\n", 
		            sx_read_module_byte (board, addr, mc_rev1),
		            sx_read_module_byte (board, addr, mc_rev2),
		            sx_read_module_byte (board, addr, mc_mtaasic_rev));

		/* The following combinations are illegal: It should theoretically
		   work, but timing problems make the bus HANG. */

		if (mod_compat_type (type) != board->ta_type) {
			printk (KERN_ERR "sx: This is an invalid configuration.\n"
			        "Don't mix TA/MTA/SXDC on the same hostadapter.\n");
			chans=0;
			break;
		}
		if ((IS_EISA_BOARD(board) || 
		     IS_SI_BOARD(board)) && (mod_compat_type(type) == 4)) {
			printk (KERN_ERR "sx: This is an invalid configuration.\n"
			        "Don't use SXDCs on an SI/XIO adapter.\n");
			chans=0;
			break;
		}
#if 0 /* Problem fixed: firmware 3.05 */
		if (IS_SX_BOARD(board) && (type == TA8)) {
			/* There are some issues with the firmware and the DCD/RTS
			   lines. It might work if you tie them together or something.
			   It might also work if you get a newer sx_firmware.	Therefore
			   this is just a warning. */
			printk (KERN_WARNING "sx: The SX host doesn't work too well "
			        "with the TA8 adapters.\nSpecialix is working on it.\n");
		}
#endif
	}

	if (chans) {
		/* board->flags |= SX_BOARD_PRESENT; */
		if(board->irq > 0) {
			/* fixed irq, probably PCI */
			if(sx_irqmask & (1 << board->irq)) { /* may we use this irq? */
				if(request_irq(board->irq, sx_interrupt, SA_SHIRQ | SA_INTERRUPT, "sx", board)) {
					printk(KERN_ERR "sx: Cannot allocate irq %d.\n", board->irq);
					board->irq = 0;
				}
			} else
				board->irq = 0;
		} else if(board->irq < 0 && sx_irqmask) {
			/* auto-allocate irq */
			int irqnr;
			int irqmask = sx_irqmask & (IS_SX_BOARD(board) ? SX_ISA_IRQ_MASK : SI2_ISA_IRQ_MASK);
			for(irqnr = 15; irqnr > 0; irqnr--)
				if(irqmask & (1 << irqnr))
					if(! request_irq(irqnr, sx_interrupt, SA_SHIRQ | SA_INTERRUPT, "sx", board))
						break;
			if(! irqnr)
				printk(KERN_ERR "sx: Cannot allocate IRQ.\n");
			board->irq = irqnr;
		} else
			board->irq = 0;

		if (board->irq) {
			/* Found a valid interrupt, start up interrupts! */
			sx_dprintk (SX_DEBUG_INIT, "Using irq %d.\n", board->irq);
			sx_start_interrupts (board);
			board->poll = sx_slowpoll;
			board->flags |= SX_IRQ_ALLOCATED;
		} else {
			/* no irq: setup board for polled operation */
			board->poll = sx_poll;
			sx_dprintk (SX_DEBUG_INIT, "Using poll-interval %d.\n", board->poll);
		}

		/* The timer should be initialized anyway: That way we can safely
			 del_timer it when the module is unloaded. */
		init_timer (&board->timer);

		if (board->poll) {
			board->timer.data = (unsigned long) board;
			board->timer.function = sx_pollfunc;
			board->timer.expires = jiffies + board->poll;
			add_timer (&board->timer);
		}
	} else {
		board->irq = 0;
	}

	board->nports = chans;
	sx_dprintk (SX_DEBUG_INIT, "returning %d ports.", board->nports);

	func_exit();
	return chans;
}


static void printheader(void)
{
	static int header_printed;

	if (!header_printed) {
		printk (KERN_INFO "Specialix SX driver "
		        "(C) 1998/1999 R.E.Wolff@BitWizard.nl \n");
		printk (KERN_INFO "sx: version %s\n", RCS_ID);
		header_printed = 1;
	}
}


static int probe_sx (struct sx_board *board)
{
	struct vpd_prom vpdp;
	char *p;
	int i;

	func_enter();

	if (!IS_CF_BOARD (board)) {    
Linus Torvalds's avatar
Linus Torvalds committed
2124
		sx_dprintk (SX_DEBUG_PROBE, "Going to verify vpd prom at %lx.\n", 
Linus Torvalds's avatar
Linus Torvalds committed
2125 2126 2127 2128 2129 2130 2131 2132 2133 2134 2135 2136 2137 2138 2139 2140 2141 2142 2143 2144 2145 2146 2147 2148
		            board->base + SX_VPD_ROM);

		if (sx_debug & SX_DEBUG_PROBE)
			my_hd ((char *)(board->base + SX_VPD_ROM), 0x40);

		p = (char *) &vpdp;
		for (i=0;i< sizeof (struct vpd_prom);i++)
			*p++ = read_sx_byte (board, SX_VPD_ROM + i*2);

		if (sx_debug & SX_DEBUG_PROBE)
			my_hd ((char *)&vpdp, 0x20);

		sx_dprintk (SX_DEBUG_PROBE, "checking identifier...\n");

		if (strncmp (vpdp.identifier, SX_VPD_IDENT_STRING, 16) != 0) {
			sx_dprintk (SX_DEBUG_PROBE, "Got non-SX identifier: '%s'\n", 
			            vpdp.identifier); 
			return 0;
		}
	}

	printheader ();

	if (!IS_CF_BOARD (board)) {
Linus Torvalds's avatar
Linus Torvalds committed
2149
		printk (KERN_DEBUG "sx: Found an SX board at %lx\n", board->hw_base);
Linus Torvalds's avatar
Linus Torvalds committed
2150 2151 2152 2153 2154 2155 2156 2157 2158 2159 2160 2161 2162 2163 2164 2165
		printk (KERN_DEBUG "sx: hw_rev: %d, assembly level: %d, uniq ID:%08x, ", 
		        vpdp.hwrev, vpdp.hwass, vpdp.uniqid);
		printk (           "Manufactured: %d/%d\n", 
		        1970 + vpdp.myear, vpdp.mweek);


		if ((((vpdp.uniqid >> 24) & SX_UNIQUEID_MASK) != SX_PCI_UNIQUEID1) &&
		    (((vpdp.uniqid >> 24) & SX_UNIQUEID_MASK) != SX_ISA_UNIQUEID1)) {
			/* This might be a bit harsh. This was the primary reason the
			   SX/ISA card didn't work at first... */
			printk (KERN_ERR "sx: Hmm. Not an SX/PCI or SX/ISA card. Sorry: giving up.\n");
			return (0);
		}

		if (((vpdp.uniqid >> 24) & SX_UNIQUEID_MASK) == SX_ISA_UNIQUEID1) {
			if (board->base & 0x8000) {
Linus Torvalds's avatar
Linus Torvalds committed
2166
				printk (KERN_WARNING "sx: Warning: There may be hardware problems with the card at %lx.\n", board->base);
Linus Torvalds's avatar
Linus Torvalds committed
2167 2168 2169 2170 2171 2172 2173 2174 2175 2176 2177 2178 2179 2180 2181 2182 2183 2184 2185 2186 2187 2188 2189 2190 2191 2192 2193 2194 2195 2196 2197
				printk (KERN_WARNING "sx: Read sx.txt for more info.\n");
			}
		}
	}

	board->nports = -1;

	/* This resets the processor, and keeps it off the bus. */
	if (!sx_reset (board)) 
		return 0;
	sx_dprintk (SX_DEBUG_INIT, "reset the board...\n");

	board->flags |= SX_BOARD_PRESENT;

	func_exit();
	return 1;
}



/* Specialix probes for this card at 32k increments from 640k to 16M.
   I consider machines with less than 16M unlikely nowadays, so I'm
   not probing above 1Mb. Also, 0xa0000, 0xb0000, are taken by the VGA
   card. 0xe0000 and 0xf0000 are taken by the BIOS. That only leaves 
   0xc0000, 0xc8000, 0xd0000 and 0xd8000 . */

static int probe_si (struct sx_board *board)
{
	int i;

	func_enter();
2198
	sx_dprintk (SX_DEBUG_PROBE, "Going to verify SI signature hw %lx at %lx.\n", board->hw_base,
Linus Torvalds's avatar
Linus Torvalds committed
2199 2200 2201 2202 2203 2204
	            board->base + SI2_ISA_ID_BASE);

	if (sx_debug & SX_DEBUG_PROBE)
		my_hd ((char *)(board->base + SI2_ISA_ID_BASE), 0x8);

	if (!IS_EISA_BOARD(board)) {
2205 2206 2207 2208 2209 2210 2211
	  if( IS_SI1_BOARD(board) ) 
	    {
		for (i=0;i<8;i++) {
		  write_sx_byte (board, SI2_ISA_ID_BASE+7-i,i); 

		}
	    }
Linus Torvalds's avatar
Linus Torvalds committed
2212 2213 2214 2215 2216 2217 2218
		for (i=0;i<8;i++) {
			if ((read_sx_byte (board, SI2_ISA_ID_BASE+7-i) & 7) != i) {
				return 0;
			}
		}
	}

2219 2220 2221 2222 2223 2224 2225 2226 2227 2228 2229 2230 2231 2232 2233 2234 2235
	/* Now we're pretty much convinced that there is an SI board here, 
	   but to prevent trouble, we'd better double check that we don't
	   have an SI1 board when we're probing for an SI2 board.... */

	write_sx_byte (board, SI2_ISA_ID_BASE,0x10); 
	if ( IS_SI1_BOARD(board)) {
		/* This should be an SI1 board, which has this
		   location writable... */
		if (read_sx_byte (board, SI2_ISA_ID_BASE) != 0x10)
			return 0; 
	} else {
		/* This should be an SI2 board, which has the bottom
		   3 bits non-writable... */
		if (read_sx_byte (board, SI2_ISA_ID_BASE) == 0x10)
			return 0; 
	}

Linus Torvalds's avatar
Linus Torvalds committed
2236 2237
	printheader ();

Linus Torvalds's avatar
Linus Torvalds committed
2238
	printk (KERN_DEBUG "sx: Found an SI board at %lx\n", board->hw_base);
Linus Torvalds's avatar
Linus Torvalds committed
2239 2240 2241 2242 2243 2244 2245 2246 2247 2248 2249 2250 2251 2252 2253 2254 2255 2256 2257 2258 2259 2260 2261 2262 2263 2264 2265 2266 2267 2268 2269 2270 2271 2272 2273 2274 2275 2276 2277
	/* Compared to the SX boards, it is a complete guess as to what
		 this card is up to... */

	board->nports = -1;

	/* This resets the processor, and keeps it off the bus. */
	if (!sx_reset (board)) 
		return 0;
	sx_dprintk (SX_DEBUG_INIT, "reset the board...\n");

	board->flags |= SX_BOARD_PRESENT;

	func_exit();
	return 1;
}


static int sx_init_drivers(void)
{
	int error;

	func_enter();

	memset(&sx_driver, 0, sizeof(sx_driver));
	sx_driver.magic = TTY_DRIVER_MAGIC;
	sx_driver.driver_name = "specialix_sx";
	sx_driver.name = "ttyX";
	sx_driver.major = SX_NORMAL_MAJOR;
	sx_driver.num = sx_nports;
	sx_driver.type = TTY_DRIVER_TYPE_SERIAL;
	sx_driver.subtype = SX_TYPE_NORMAL;
	sx_driver.init_termios = tty_std_termios;
	sx_driver.init_termios.c_cflag =
	  B9600 | CS8 | CREAD | HUPCL | CLOCAL;
	sx_driver.flags = TTY_DRIVER_REAL_RAW;
	sx_driver.refcount = &sx_refcount;
	sx_driver.table = sx_table;
	sx_driver.termios = sx_termios;
	sx_driver.termios_locked = sx_termios_locked;
Linus Torvalds's avatar
Linus Torvalds committed
2278
	sx_driver.break_ctl = sx_break;
Linus Torvalds's avatar
Linus Torvalds committed
2279 2280 2281 2282 2283 2284 2285 2286 2287 2288 2289 2290 2291 2292 2293 2294 2295 2296 2297 2298 2299 2300 2301 2302 2303 2304 2305 2306 2307 2308 2309 2310 2311 2312 2313 2314 2315 2316 2317 2318 2319 2320 2321 2322 2323 2324 2325 2326 2327 2328 2329 2330 2331 2332 2333 2334 2335 2336 2337 2338 2339 2340 2341 2342 2343 2344 2345 2346 2347 2348 2349 2350 2351 2352 2353 2354 2355 2356 2357 2358 2359 2360 2361 2362 2363 2364 2365 2366 2367 2368 2369 2370 2371 2372 2373 2374 2375 2376 2377 2378 2379 2380 2381 2382 2383 2384 2385 2386 2387 2388 2389 2390 2391 2392 2393 2394 2395 2396 2397 2398 2399 2400 2401 2402 2403 2404 2405 2406 2407 2408 2409 2410 2411 2412 2413 2414 2415 2416 2417 2418 2419 2420 2421 2422 2423 2424 2425 2426 2427 2428 2429 2430 2431 2432 2433 2434 2435 2436 2437 2438 2439 2440 2441 2442 2443 2444 2445 2446 2447 2448 2449 2450 2451 2452 2453 2454 2455 2456 2457 2458 2459 2460 2461 2462 2463 2464 2465 2466 2467 2468 2469 2470 2471 2472 2473 2474 2475 2476 2477 2478 2479 2480 2481 2482 2483 2484 2485 2486 2487 2488 2489 2490 2491 2492 2493 2494 2495 2496 2497 2498 2499 2500 2501

	sx_driver.open	= sx_open;
	sx_driver.close = gs_close;
	sx_driver.write = gs_write;
	sx_driver.put_char = gs_put_char;
	sx_driver.flush_chars = gs_flush_chars;
	sx_driver.write_room = gs_write_room;
	sx_driver.chars_in_buffer = gs_chars_in_buffer;
	sx_driver.flush_buffer = gs_flush_buffer;
	sx_driver.ioctl = sx_ioctl;
	sx_driver.throttle = sx_throttle;
	sx_driver.unthrottle = sx_unthrottle;
	sx_driver.set_termios = gs_set_termios;
	sx_driver.stop = gs_stop;
	sx_driver.start = gs_start;
	sx_driver.hangup = gs_hangup;

	sx_callout_driver = sx_driver;
	sx_callout_driver.name = "cux";
	sx_callout_driver.major = SX_CALLOUT_MAJOR;
	sx_callout_driver.subtype = SX_TYPE_CALLOUT;

	if ((error = tty_register_driver(&sx_driver))) {
		printk(KERN_ERR "sx: Couldn't register sx driver, error = %d\n",
		       error);
		return 1;
	}
	if ((error = tty_register_driver(&sx_callout_driver))) {
		tty_unregister_driver(&sx_driver);
		printk(KERN_ERR "sx: Couldn't register sx callout driver, error = %d\n",
		       error);
		return 1;
	}

	func_exit();
	return 0;
}


static void * ckmalloc (int size)
{
	void *p;

	p = kmalloc(size, GFP_KERNEL);
	if (p) 
		memset(p, 0, size);
	return p;
}


static int sx_init_portstructs (int nboards, int nports)
{
	struct sx_board *board;
	struct sx_port *port;
	int i, j;
	int addr, chans;
	int portno;

	func_enter();

	/* Many drivers statically allocate the maximum number of ports
	   There is no reason not to allocate them dynamically. Is there? -- REW */
	sx_ports          = ckmalloc(nports * sizeof (struct sx_port));
	if (!sx_ports)
		return -ENOMEM;

	sx_termios        = ckmalloc(nports * sizeof (struct termios *));
	if (!sx_termios) {
		kfree (sx_ports);
		return -ENOMEM;
	}

	sx_termios_locked = ckmalloc(nports * sizeof (struct termios *));
	if (!sx_termios_locked) {
		kfree (sx_ports);
		kfree (sx_termios);
		return -ENOMEM;
	}

	/* Adjust the values in the "driver" */
	sx_driver.termios = sx_termios;
	sx_driver.termios_locked = sx_termios_locked;

	port = sx_ports;
	for (i = 0; i < nboards; i++) {
		board = &boards[i];
		board->ports = port;
		for (j=0; j < boards[i].nports;j++) {
			sx_dprintk (SX_DEBUG_INIT, "initing port %d\n", j);
			port->gs.callout_termios = tty_std_termios;
			port->gs.normal_termios	= tty_std_termios;
			port->gs.magic = SX_MAGIC;
			port->gs.close_delay = HZ/2;
			port->gs.closing_wait = 30 * HZ;
			port->board = board;
			port->gs.rd = &sx_real_driver;
#ifdef NEW_WRITE_LOCKING
			port->gs.port_write_sem = MUTEX;
#endif
			/*
			 * Initializing wait queue
			 */
			init_waitqueue_head(&port->gs.open_wait);
			init_waitqueue_head(&port->gs.close_wait); 		
			
			port++;
		}
	}

	port = sx_ports;
	portno = 0;
	for (i = 0; i < nboards; i++) {
		board = &boards[i];
		board->port_base = portno;
		/* Possibly the configuration was rejected. */
		sx_dprintk (SX_DEBUG_PROBE, "Board has %d channels\n", board->nports);
		if (board->nports <= 0) continue;
		/* XXX byteorder ?? */
		for (addr = 0x80;addr != 0;addr = read_sx_word (board, addr) & 0x7fff) {
			chans = sx_read_module_byte (board, addr, mc_type); 
			sx_dprintk (SX_DEBUG_PROBE, "Module at %x: %d channels\n", addr, chans);
			sx_dprintk (SX_DEBUG_PROBE, "Port at");
			for (j=0;j<chans;j++) {
				/* The "sx-way" is the way it SHOULD be done. That way in the 
				   future, the firmware may for example pack the structures a bit
				   more efficient. Neil tells me it isn't going to happen anytime
				   soon though. */
				if (IS_SX_BOARD(board))
					port->ch_base = sx_read_module_word (board, addr+j*2, mc_chan_pointer);
				else
					port->ch_base = addr + 0x100 + 0x300*j;

				sx_dprintk (SX_DEBUG_PROBE, " %x", port->ch_base);
				port->line = portno++;
				port++;
			}
			sx_dprintk (SX_DEBUG_PROBE, "\n");
		}
		/* This has to be done earlier. */
		/* board->flags |= SX_BOARD_INITIALIZED; */
	}

	func_exit();
	return 0;
}

static void __exit sx_release_drivers(void)
{
	func_enter();
	tty_unregister_driver(&sx_driver);
	tty_unregister_driver(&sx_callout_driver);
	func_exit();
}

#ifdef TWO_ZERO
#define PDEV unsigned char pci_bus, unsigned pci_fun
#define pdev pci_bus, pci_fun
#else
#define PDEV   struct pci_dev *pdev
#endif


#ifdef CONFIG_PCI
 /******************************************************** 
 * Setting bit 17 in the CNTRL register of the PLX 9050  * 
 * chip forces a retry on writes while a read is pending.*
 * This is to prevent the card locking up on Intel Xeon  *
 * multiprocessor systems with the NX chipset.    -- NV  *
 ********************************************************/

/* Newer cards are produced with this bit set from the configuration
   EEprom.  As the bit is read/write for the CPU, we can fix it here,
   if we detect that it isn't set correctly. -- REW */

static void fix_sx_pci (PDEV, struct sx_board *board)
{
	unsigned int hwbase;
	unsigned long rebase;
	unsigned int t;

#define CNTRL_REG_OFFSET        0x50
#define CNTRL_REG_GOODVALUE     0x18260000

	pci_read_config_dword(pdev, PCI_BASE_ADDRESS_0, &hwbase);
	hwbase &= PCI_BASE_ADDRESS_MEM_MASK;
	rebase = (ulong) ioremap(hwbase, 0x80);
	t = readl (rebase + CNTRL_REG_OFFSET);
	if (t != CNTRL_REG_GOODVALUE) {
		printk (KERN_DEBUG "sx: performing cntrl reg fix: %08x -> %08x\n", t, CNTRL_REG_GOODVALUE); 
		writel (CNTRL_REG_GOODVALUE, rebase + CNTRL_REG_OFFSET);
	}
	my_iounmap (hwbase, rebase);
}
#endif


static int __init sx_init(void) 
{
	int i;
	int found = 0;
	int eisa_slot;
	struct sx_board *board;

#ifdef CONFIG_PCI
#ifndef TWO_ZERO
	struct pci_dev *pdev = NULL;
#else
	unsigned char pci_bus, pci_fun;
	/* in 2.2.x pdev is a pointer defining a PCI device. In 2.0 its the bus/fn */
#endif
	unsigned int tint;
	unsigned short tshort;
#endif

	func_enter();
	sx_dprintk (SX_DEBUG_INIT, "Initing sx module... (sx_debug=%d)\n", sx_debug);
	if (abs ((long) (&sx_debug) - sx_debug) < 0x10000) {
		printk (KERN_WARNING "sx: sx_debug is an address, instead of a value. "
		        "Assuming -1.\n");
		printk ("(%p)\n", &sx_debug);
		sx_debug=-1;
	}

2502 2503 2504 2505 2506
	if (misc_register(&sx_fw_device) < 0) {
		printk(KERN_ERR "SX: Unable to register firmware loader driver.\n");
		return -EIO;
	}

Linus Torvalds's avatar
Linus Torvalds committed
2507 2508 2509 2510 2511 2512 2513 2514 2515 2516 2517 2518 2519 2520 2521 2522 2523 2524 2525 2526 2527 2528 2529 2530 2531 2532 2533 2534 2535 2536 2537 2538 2539 2540 2541 2542 2543 2544 2545 2546 2547 2548 2549 2550 2551 2552 2553 2554 2555 2556 2557 2558 2559 2560 2561
#ifdef CONFIG_PCI
	if (pci_present ()) {
#ifndef TWO_ZERO
		while ((pdev = pci_find_device (PCI_VENDOR_ID_SPECIALIX, 
		                                PCI_DEVICE_ID_SPECIALIX_SX_XIO_IO8, 
			                              pdev))) {
			if (pci_enable_device(pdev))
				continue;
#else
			for (i=0;i< SX_NBOARDS;i++) {
				if (pcibios_find_device (PCI_VENDOR_ID_SPECIALIX, 
				                         PCI_DEVICE_ID_SPECIALIX_SX_XIO_IO8, i,
					                       &pci_bus, &pci_fun)) break;
#endif
			/* Specialix has a whole bunch of cards with
			   0x2000 as the device ID. They say its because
			   the standard requires it. Stupid standard. */
			/* It seems that reading a word doesn't work reliably on 2.0.
			   Also, reading a non-aligned dword doesn't work. So we read the
			   whole dword at 0x2c and extract the word at 0x2e (SUBSYSTEM_ID)
			   ourselves */
			/* I don't know why the define doesn't work, constant 0x2c does --REW */ 
			pci_read_config_dword (pdev, 0x2c, &tint);
			tshort = (tint >> 16) & 0xffff;
			sx_dprintk (SX_DEBUG_PROBE, "Got a specialix card: %x.\n", tint);
			/* sx_dprintk (SX_DEBUG_PROBE, "pdev = %d/%d	(%x)\n", pdev, tint); */ 
			if ((tshort != 0x0200) && (tshort != 0x0300)) {
				sx_dprintk (SX_DEBUG_PROBE, "But it's not an SX card (%d)...\n", 
				            tshort);
				continue;
			}
			board = &boards[found];

			board->flags &= ~SX_BOARD_TYPE;
			board->flags |= (tshort == 0x200)?SX_PCI_BOARD:
			                                  SX_CFPCI_BOARD;

			/* CF boards use base address 3.... */
			if (IS_CF_BOARD (board))
				board->hw_base = pci_resource_start (pdev, 3);
			else
				board->hw_base = pci_resource_start (pdev, 2);
			board->base2 = 
			board->base = (ulong) ioremap(board->hw_base, WINDOW_LEN (board));
			if (!board->base) {
				printk(KERN_ERR "ioremap failed\n");
				/* XXX handle error */
			}

			/* Most of the stuff on the CF board is offset by
			   0x18000 ....  */
			if (IS_CF_BOARD (board)) board->base += 0x18000;

			board->irq = get_irq (pdev);

Linus Torvalds's avatar
Linus Torvalds committed
2562
			sx_dprintk (SX_DEBUG_PROBE, "Got a specialix card: %x/%lx(%d) %x.\n", 
Linus Torvalds's avatar
Linus Torvalds committed
2563 2564 2565 2566 2567 2568 2569 2570 2571 2572 2573 2574 2575 2576 2577 2578 2579 2580 2581 2582 2583 2584 2585 2586 2587 2588 2589 2590 2591 2592 2593 2594 2595 2596 2597 2598 2599 2600 2601 2602 2603 2604
			            tint, boards[found].base, board->irq, board->flags);

			if (probe_sx (board)) {
				found++;
				fix_sx_pci (pdev, board);
			} else 
				my_iounmap (board->hw_base, board->base);
		}
	}
#endif

	for (i=0;i<NR_SX_ADDRS;i++) {
		board = &boards[found];
		board->hw_base = sx_probe_addrs[i];
		board->base2 =
		board->base = (ulong) ioremap(board->hw_base, SX_WINDOW_LEN);
		board->flags &= ~SX_BOARD_TYPE;
		board->flags |=	SX_ISA_BOARD;
		board->irq = sx_irqmask?-1:0;

		if (probe_sx (board)) {
			found++;
		} else {
			my_iounmap (board->hw_base, board->base);
		}
	}

	for (i=0;i<NR_SI_ADDRS;i++) {
		board = &boards[found];
		board->hw_base = si_probe_addrs[i];
		board->base2 =
		board->base = (ulong) ioremap(board->hw_base, SI2_ISA_WINDOW_LEN);
		board->flags &= ~SX_BOARD_TYPE;
		board->flags |=  SI_ISA_BOARD;
		board->irq = sx_irqmask ?-1:0;

		if (probe_si (board)) {
			found++;
		} else {
			my_iounmap (board->hw_base, board->base);
		}
	}
2605 2606 2607 2608 2609 2610 2611 2612 2613 2614 2615 2616 2617 2618 2619
	for (i=0;i<NR_SI1_ADDRS;i++) {
		board = &boards[found];
		board->hw_base = si1_probe_addrs[i];
		board->base2 =
		board->base = (ulong) ioremap(board->hw_base, SI1_ISA_WINDOW_LEN);
		board->flags &= ~SX_BOARD_TYPE;
		board->flags |=  SI1_ISA_BOARD;
		board->irq = sx_irqmask ?-1:0;

		if (probe_si (board)) {
			found++;
		} else {
			my_iounmap (board->hw_base, board->base);
		}
	}
Linus Torvalds's avatar
Linus Torvalds committed
2620 2621 2622 2623 2624 2625 2626 2627 2628 2629 2630 2631 2632 2633 2634 2635 2636 2637 2638

        sx_dprintk(SX_DEBUG_PROBE, "Probing for EISA cards\n");
        for(eisa_slot=0x1000; eisa_slot<0x10000; eisa_slot+=0x1000)
        {
                if((inb(eisa_slot+0xc80)==0x4d) &&
                   (inb(eisa_slot+0xc81)==0x98))
                {
			sx_dprintk(SX_DEBUG_PROBE, "%s : Signature found in EISA slot %d, Product %d Rev %d\n",
			                        "XIO", (eisa_slot>>12), inb(eisa_slot+0xc82), inb(eisa_slot+0xc83));

			board = &boards[found];
			board->eisa_base = eisa_slot;
			board->flags &= ~SX_BOARD_TYPE;
			board->flags |= SI_EISA_BOARD;

			board->hw_base = (((inb(0xc01+eisa_slot) << 8) + inb(0xc00+eisa_slot)) << 16);
			board->base2 =
			board->base = (ulong) ioremap(board->hw_base, SI2_EISA_WINDOW_LEN);

Linus Torvalds's avatar
Linus Torvalds committed
2639 2640
			sx_dprintk(SX_DEBUG_PROBE, "IO hw_base address: %lx\n", board->hw_base);
			sx_dprintk(SX_DEBUG_PROBE, "base: %lx\n", board->base);
Linus Torvalds's avatar
Linus Torvalds committed
2641 2642 2643 2644 2645 2646 2647 2648 2649 2650
			board->irq = inb(board->eisa_base+0xc02)>>4; 
			sx_dprintk(SX_DEBUG_PROBE, "IRQ: %d\n", board->irq);
			
			probe_si(board);

			found++;
		}
	}
	if (found) {
		printk (KERN_INFO "sx: total of %d boards detected.\n", found);
2651 2652
	} else {
		misc_deregister(&sx_fw_device);
Linus Torvalds's avatar
Linus Torvalds committed
2653 2654 2655 2656 2657 2658 2659 2660 2661 2662 2663 2664 2665 2666 2667 2668
	}

	func_exit();
	return found?0:-EIO;
}


static void __exit sx_exit (void)
{
	int i; 
	struct sx_board *board;

	func_enter();
	for (i = 0; i < SX_NBOARDS; i++) {
		board = &boards[i];
		if (board->flags & SX_BOARD_INITIALIZED) {
Linus Torvalds's avatar
Linus Torvalds committed
2669
			sx_dprintk (SX_DEBUG_CLEANUP, "Cleaning up board at %lx\n", board->base);
Linus Torvalds's avatar
Linus Torvalds committed
2670 2671 2672 2673 2674 2675 2676 2677 2678 2679 2680 2681 2682 2683 2684 2685 2686 2687 2688 2689 2690 2691 2692 2693 2694 2695 2696
			/* The board should stop messing with us.
			   (actually I mean the interrupt) */
			sx_reset (board);
			if ((board->irq) && (board->flags & SX_IRQ_ALLOCATED))
				free_irq (board->irq, board);

			/* It is safe/allowed to del_timer a non-active timer */
			del_timer (& board->timer);
			my_iounmap (board->hw_base, board->base);
		}
	}
	if (misc_deregister(&sx_fw_device) < 0) {
		printk (KERN_INFO "sx: couldn't deregister firmware loader device\n");
	}
	sx_dprintk (SX_DEBUG_CLEANUP, "Cleaning up drivers (%d)\n", sx_initialized);
	if (sx_initialized)
		sx_release_drivers ();

	kfree (sx_ports);
	kfree (sx_termios);
	kfree (sx_termios_locked);
	func_exit();
}

module_init(sx_init);
module_exit(sx_exit);