When we loose a device for whatever reason while (re)scanning zones, we
trip over a NULL pointer in blk_revalidate_zone_cb, like in the following
log:

sd 0:0:0:0: [sda] 3418095616 4096-byte logical blocks: (14.0 TB/12.7 TiB)
sd 0:0:0:0: [sda] 52156 zones of 65536 logical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 37 00 00 08
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] REPORT ZONES start lba 1065287680 failed
sd 0:0:0:0: [sda] REPORT ZONES: Result: hostbyte=0x00 driverbyte=0x08
sd 0:0:0:0: [sda] Sense Key : 0xb [current]
sd 0:0:0:0: [sda] ASC=0x0 ASCQ=0x6
sda: failed to revalidate zones
sd 0:0:0:0: [sda] 0 4096-byte logical blocks: (0 B/0 B)
sda: detected capacity change from 14000519643136 to 0
==================================================================
BUG: KASAN: null-ptr-deref in blk_revalidate_zone_cb+0x1b7/0x550
Write of size 8 at addr 0000000000000010 by task kworker/u4:1/58

CPU: 1 PID: 58 Comm: kworker/u4:1 Not tainted 5.8.0-rc1 #692
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4-rebuilt.opensuse.org 04/01/2014
Workqueue: events_unbound async_run_entry_fn
Call Trace:
 dump_stack+0x7d/0xb0
 ? blk_revalidate_zone_cb+0x1b7/0x550
 kasan_report.cold+0x5/0x37
 ? blk_revalidate_zone_cb+0x1b7/0x550
 check_memory_region+0x145/0x1a0
 blk_revalidate_zone_cb+0x1b7/0x550
 sd_zbc_parse_report+0x1f1/0x370
 ? blk_req_zone_write_trylock+0x200/0x200
 ? sectors_to_logical+0x60/0x60
 ? blk_req_zone_write_trylock+0x200/0x200
 ? blk_req_zone_write_trylock+0x200/0x200
 sd_zbc_report_zones+0x3c4/0x5e0
 ? sd_dif_config_host+0x500/0x500
 blk_revalidate_disk_zones+0x231/0x44d
 ? _raw_write_lock_irqsave+0xb0/0xb0
 ? blk_queue_free_zone_bitmaps+0xd0/0xd0
 sd_zbc_read_zones+0x8cf/0x11a0
 sd_revalidate_disk+0x305c/0x64e0
 ? __device_add_disk+0x776/0xf20
 ? read_capacity_16.part.0+0x1080/0x1080
 ? blk_alloc_devt+0x250/0x250
 ? create_object.isra.0+0x595/0xa20
 ? kasan_unpoison_shadow+0x33/0x40
 sd_probe+0x8dc/0xcd2
 really_probe+0x20e/0xaf0
 __driver_attach_async_helper+0x249/0x2d0
 async_run_entry_fn+0xbe/0x560
 process_one_work+0x764/0x1290
 ? _raw_read_unlock_irqrestore+0x30/0x30
 worker_thread+0x598/0x12f0
 ? __kthread_parkme+0xc6/0x1b0
 ? schedule+0xed/0x2c0
 ? process_one_work+0x1290/0x1290
 kthread+0x36b/0x440
 ? kthread_create_worker_on_cpu+0xa0/0xa0
 ret_from_fork+0x22/0x30
==================================================================

When the device is already gone we end up with the following scenario:
The device's capacity is 0 and thus the number of zones will be 0 as well. When
allocating the bitmap for the conventional zones, we then trip over a NULL
pointer.

So if we encounter a zoned block device with a 0 capacity, don't dare to
revalidate the zones sizes.

Fixes: 6c6b3549 ("block: set the zone size in blk_revalidate_disk_zones atomically")
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>