The DP spec says:
"The transmitter shall support at least three levels of voltage
 swing (Levels 0, 1, and 2).

 If only three levels of voltage swing are supported (VOLTAGE
 SWING SET field (bits 1:0) are programmed to 10 (Level 2)),
 this bit shall be set to 1, and cleared in all other cases.

 If all four levels of voltage swing are supported (VOLTAGE
 SWING SET field (bits 1:0) are programmed to 11 (Level 3)),
 this bit shall be set to 1,and cleared in all other cases."

Let's follow that exactly instead of the current apporach
where we can set those also for vswing/preemph levels 0 or 1
(or 2 when the platform max is 3).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200512174145.3186-7-ville.syrjala@linux.intel.comReviewed-by: Imre Deak <imre.deak@intel.com>