So far changing the period by just setting new period values while
running did not work.

The order as indicated by the publicly available reference manual of the i.MX8MP [1]
indicates a sequence:

 * initiate the programming sequence
 * set the values for PPS period and start time
 * start the pulse train generation.

This is currently not used in dwmac5_flex_pps_config(), which instead does:

 * initiate the programming sequence and immediately start the pulse train generation
 * set the values for PPS period and start time

This caused the period values written not to take effect until the FlexPPS output was
disabled and re-enabled again.

This patch fix the order and allows the period to be set immediately.

[1] https://www.nxp.com/webapp/Download?colCode=IMX8MPRM

Fixes: 9a8a02c9 ("net: stmmac: Add Flexible PPS support")
Signed-off-by: Johannes Zink <j.zink@pengutronix.de>
Link: https://lore.kernel.org/r/20230210143937.3427483-1-j.zink@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>