• Luis F. Ortiz's avatar
    [ATYFB]: Fix onboard video on SPARC Blade 100 for 2.6.{13,14,15} · 5b373e10
    Luis F. Ortiz authored
    	I have recently been switching from using 2.4.32 on my trusty
    old Sparc Blade 100 to using 2.6.15 .  Some of the problems I ran into
    were distorted video when the console was active (missing first
    character, skipped dots) and when running X windows (colored snow,
    stripes, missing pixels).  A quick examination of the 2.6 versus 2.4
    source for the ATY driver revealed alot of changes.
    
             A closer look at the code/data for the 64GR/XL chip revealed
    two minor "typos" that the rewriter(s) of the code made.  The first is
    a incorrect clock value (230 .vs. 235) and the second is a missing
    flag (M64F_SDRAM_MAGIC_PLL).  Making both these changes seems to have
    fixed my problem.  I tend to think the 235 value is the correct one,
    as there is a 29.4 Mhz clock crystal close to the video chip and 235.2
    (29.4*8) is too close to 235 to make it a coincidence.
    
    	The flag for M64F_SDRAM_MAGIC_PLL was dropped during the
    changes made by adaplas in file revision 1.72 on the old bitkeeper
    repository.
    
    	The change relating to the clock rate has been there forever,
    at least in the 2.6 tree.  I'm not sure where to look for the old 2.5
    tree or if anyone cares when it happened.
    
    On SPARC Blades 100's, which use the ATY MACH64GR video chipset, the
    clock crystal frequency is 235.2 Mhz, not 230 Mhz.  The chipset also
    requires the use of M64F_SDRAM_MAGIC_PLL in order to setup the PLL
    properly for the DRAM.
    Signed-off-by: default avatarLuis F. Ortiz <lfo@Polyad.Org>
    Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
    5b373e10
atyfb_base.c 104 KB