-
Tim Harvey authored
The imx8mm-venice-gw73xx-0x som+baseboard combination has a multi-protocol RS-232/RS-485/RS-422 transceiver to an off-board connector which can be configured in a number of ways via UART and GPIO configuration. The default configuration per the imx8mm-venice-gw73xx-0x dts is for UART2 TX/RX and UART4 TX/RX to be available as RS-232: J15.1 UART2 TX out J15.2 UART2 RX in J15.3 UART4 TX out J15.4 UART4 RX in J15.5 GND Add dt overlays to allow additional the modes of operation: rs232-rts (UART2 RS-232 with RTS/CTS hardware flow control) J15.1 TX out J15.2 RX in J15.3 RTS out J15.4 CTS in J15.5 GND rs485 (UART2 RS-485 half duplex) J15.1 TXRX- J15.2 N/C J15.3 TXRX+ J15.4 N/C J15.5 GND rs422 (UART2 RS-422 full duplex) J15.1 TX- J15.2 RX+ J15.3 TX+ J15.4 RX- J15.5 GND Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
665f7f1c