• Prabhakar Kushwaha's avatar
    powerpc/85xx: Add BSC9131 RDB Support · d729b900
    Prabhakar Kushwaha authored
    BSC9131RDB is a Freescale reference design board for BSC9131 SoC. The
    BSC9131 is integrated SoC that targets Femto base station market. It
    combines Power Architecture e500v2 and DSP StarCore SC3850 core
    technologies with MAPLE-B2F baseband acceleration processing elements.
    
    The BSC9131 SoC includes the following function and features:
        . Power Architecture subsystem including a e500 processor with 256-Kbyte
        shared L2 cache
        . StarCore SC3850 DSP subsystem with a 512-Kbyte private L2 cache
        . The Multi Accelerator Platform Engine for Femto BaseStation Baseband
          Processing (MAPLE-B2F)
        . A multi-standard baseband algorithm accelerator for Channel
          Decoding/Encoding, Fourier Transforms, UMTS chip rate processing, LTE
          UP/DL Channel processing, and CRC algorithms
        . Consists of accelerators for Convolution, Filtering, Turbo Encoding,
          Turbo Decoding, Viterbi decoding, Chiprate processing, and Matrix
          Inversion operations
        . DDR3/3L memory interface with 32-bit data width without ECC and 16-bit
          with ECC, up to 400-MHz clock/800 MHz data rate
        . Dedicated security engine featuring trusted boot
        . DMA controller
        . OCNDMA with four bidirectional channels
        . Interfaces
        . Two triple-speed Gigabit Ethernet controllers featuring network
          acceleration including IEEE 1588. v2 hardware support and
          virtualization (eTSEC)
        . eTSEC 1 supports RGMII/RMII
        . eTSEC 2 supports RGMII
        . High-speed USB 2.0 host and device controller with ULPI interface
        . Enhanced secure digital (SD/MMC) host controller (eSDHC)
        . Antenna interface controller (AIC), supporting three industry standard
          JESD207/three custom ADI RF interfaces (two dual port and one single
          port) and three MAXIM's MaxPHY serial interfaces
        . ADI lanes support both full duplex FDD support and half duplex TDD
          support
        . Universal Subscriber Identity Module (USIM) interface that facilitates
          communication to SIM cards or Eurochip pre-paid phone cards
        . TDM with one TDM port
        . Two DUART, four eSPI, and two I2C controllers
        . Integrated Flash memory controller (IFC)
        . TDM with 256 channels
        . GPIO
        . Sixteen 32-bit timers
    
    The DSP portion of the SoC consists of DSP core (SC3850) and various
    accelerators pertaining to DSP operations.
    
     BSC9131RDB Overview
     ----------------------
        BSC9131 SoC
        1Gbyte DDR3 (on board DDR)
        128Mbyte 2K page size NAND Flash
        256 Kbit M24256 I2C EEPROM
        128 Mbit SPI Flash memory
        USB-ULPI
        eTSEC1: Connected to RGMII PHY
        eTSEC2: Connected to RGMII PHY
        DUART interface: supports one UARTs up to 115200 bps for console display
    
     Linux runs on e500v2 core and access some DSP peripherals like AIC
    Signed-off-by: default avatarRamneek Mehresh <ramneek.mehresh@freescale.com>
    Signed-off-by: default avatarPriyanka Jain <Priyanka.Jain@freescale.com>
    Signed-off-by: default avatarAkhil Goyal <Akhil.Goyal@freescale.com>
    Signed-off-by: default avatarPoonam Aggrwal <poonam.aggrwal@freescale.com>
    Signed-off-by: default avatarRajan Srivastava <rajan.srivastava@freescale.com>
    Signed-off-by: default avatarPrabhakar Kushwaha <prabhakar@freescale.com>
    Signed-off-by: default avatarKumar Gala <galak@kernel.crashing.org>
    d729b900
bsc9131rdb.dtsi 3.75 KB