Currently we consider the max vswing reached when we transmit a
the max voltage level, but we don't consider pre-emphasis at all.
This kinda matches older DP specs that only had some vague text
about transmitting the maximum voltage swing. Latest versions
now say something vague about consider the sum of the vswing
and pre-emphasis fields in the ADJUST_REQUEST_LANE registers.
Very vague, and super confusing especially the fact that it
talks about transmitted voltgage swing in the same sentence
as it say to look at the requested values.

Also glanced at the link CTS spec, and that one seems to have
tests that assume contradicting behaviour. Some say to consider
just the vswing level we transmit, others say to check for
sum of transmitted vswing+preemph being 3.

So let's try to take some kind of sane middle ground here.
I think what could make sense is only consider max vswing
reached if MAX_SWING_REACHED==1 _and_ vswing+preemph==3.
That will allow things to go all the way up to vswing 3 +
pre-emph 0 or vswing 2 + pre-emph 1, depending on what
the maximum supported vswing is. Only considering the sum
of vswing+pre-emph doesn't make much sense to me since
we could terminate too early if the sink requests eg.
vswing 0 + pre-emph 3. And if we'd stick to the current
code we could terminate too early of the sink asks for
vswing 2 + pre-emph 0 when vswing level 3 is not supported.

Side note: I don't really understand why any of this stuff is
"specified" at all. There is already a limit of 5 attempts at
the same vswing+pre-emph level, and a total limit of 10
attempts. So might as well stick to the same max 5 attempts
across the board IMO.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211004170535.4173-2-ville.syrjala@linux.intel.comReviewed-by: Imre Deak <imre.deak@intel.com>