-
Mark Rutland authored
When Priority Mask Hint Enable (PMHE) == 0b1, the GIC may use the PMR value to determine whether to signal an IRQ to a PE, and consequently after a change to the PMR value, a DSB SY may be required to ensure that interrupts are signalled to a CPU in finite time. When PMHE == 0b0, interrupts are always signalled to the relevant PE, and all masking occurs locally, without requiring a DSB SY. Since commit: f2266504 ("arm64: Relax ICC_PMR_EL1 accesses when ICC_CTLR_EL1.PMHE is clear") ... we handle this dynamically: in most cases a static key is used to determine whether to issue a DSB SY, but the entry code must read from ICC_CTLR_EL1 as static keys aren't accessible from plain assembly. It would be much nicer to use an alternative instruction sequence for the DSB, as this would avoid the need to read from ICC_CTLR_EL1 in the entry code, and for most other code this will result in simpler code generation with fewer instructions and fewer branches. This patch adds a new ARM64_HAS_GIC_PRIO_RELAXED_SYNC cpucap which is only set when ICC_CTLR_EL1.PMHE == 0b0 (and GIC priority masking is in use). This allows us to replace the existing users of the `gic_pmr_sync` static key with alternative sequences which default to a DSB SY and are relaxed to a NOP when PMHE is not in use. The entry assembly management of the PMR is slightly restructured to use a branch (rather than multiple NOPs) when priority masking is not in use. This is more in keeping with other alternatives in the entry assembly, and permits the use of a separate alternatives for the PMHE-dependent DSB SY (and removal of the conditional branch this currently requires). For consistency I've adjusted both the save and restore paths. According to bloat-o-meter, when building defconfig + CONFIG_ARM64_PSEUDO_NMI=y this shrinks the kernel text by ~4KiB: | add/remove: 4/2 grow/shrink: 42/310 up/down: 332/-5032 (-4700) The resulting vmlinux is ~66KiB smaller, though the resulting Image size is unchanged due to padding and alignment: | [mark@lakrids:~/src/linux]% ls -al vmlinux-* | -rwxr-xr-x 1 mark mark 137508344 Jan 17 14:11 vmlinux-after | -rwxr-xr-x 1 mark mark 137575440 Jan 17 13:49 vmlinux-before | [mark@lakrids:~/src/linux]% ls -al Image-* | -rw-r--r-- 1 mark mark 38777344 Jan 17 14:11 Image-after | -rw-r--r-- 1 mark mark 38777344 Jan 17 13:49 Image-before Prior to this patch we did not verify the state of ICC_CTLR_EL1.PMHE on secondary CPUs. As of this patch this is verified by the cpufeature code when using GIC priority masking (i.e. when using pseudo-NMIs). Note that since commit: 7e3a57fa ("arm64: Document ICC_CTLR_EL3.PMHE setting requirements") ... Documentation/arm64/booting.rst specifies: | - ICC_CTLR_EL3.PMHE (bit 6) must be set to the same value across | all CPUs the kernel is executing on, and must stay constant | for the lifetime of the kernel. ... so that should not adversely affect any compliant systems, and as we'll only check for the absense of PMHE when using pseudo-NMIs, this will only fire when such mismatch will adversely affect the system. Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Reviewed-by:
Marc Zyngier <maz@kernel.org> Cc: Mark Brown <broonie@kernel.org> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20230130145429.903791-5-mark.rutland@arm.comSigned-off-by:
Catalin Marinas <catalin.marinas@arm.com>
8bf0a804