T1040D4RDB/T1042D4RDB are Freescale Reference Design Board
which can support T1040/T1042 QorIQ Power
Architecture™ processor respectively

T1040D4RDB/T1042D4RDB board Overview
-------------------------------------
- SERDES Connections, 8 lanes supporting:
        - PCI
        - SGMII
        - SATA 2.0
        - QSGMII(only for T1040D4RDB)
    - DDR Controller
        - Supports rates of up to 1600 MHz data-rate
        - Supports one DDR4 UDIMM
    -IFC/Local Bus
        - NAND flash: 1GB 8-bit NAND flash
        - NOR: 128MB 16-bit NOR Flash
    - Ethernet
        - Two on-board RGMII 10/100/1G ethernet ports.
        - PHY #0 remains powered up during deep-sleep
    - CPLD
    - Clocks
        - System and DDR clock (SYSCLK, “DDRCLK”)
        - SERDES clocks
    - Power Supplies
    - USB
        - Supports two USB 2.0 ports with integrated PHYs
        - Two type A ports with 5V@1.5A per port.
    - SDHC
        - SDHC/SDXC connector
    - SPI
        - On-board 64MB SPI flash
    - I2C
        - Devices connected: EEPROM, thermal monitor, VID controller
    - Other IO
        - Two Serial ports
        - ProfiBus port

    Add support for T1040/T1042D4RDB board:
    -add device tree
    -Add entry in corenet_generic.c
Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>