arch/arm64/boot/dts/freescale/fsl-lx2160a-bluebox3-rev-a.dts · ae45d84fc36d01dcb1007f4298871eec37907904 · Kirill Smelkov / linux

The NXP BlueBox3 is a prototyping board for high-performance autonomous driving systems. It contains two Linux systems, running on the LX2160A and the other on the S32G2 SoC. This patch adds the device tree support for the LX2160A SoC. In terms of networking from the LX2160A's perspective, there are: - 4 RJ45 10G ports using Aquantia copper PHYs which are attached directly to DPAA2 ports on the LX2160A - 3 NXP SJA1110 automotive Ethernet switches. First two are managed by the LX2160A (each switch has a host port towards a dpmac), the third switch is managed by the S32G2. All 3 switches are interconnected through on-board SERDES lanes. The cascade ports between the 2 switches managed by LX2160A form a DSA link, the cascade ports between the LX2160A and the S32G2 domain form user ports (the "to_sw3" net device). - 2 RJ45 1G ports using Atheros copper PHYs which are attached directly to NXP SJA1110 switches - 12 automotive 100base-T1 single-pair Ethernet ports routed from the SJA1110 internal PHY ports (TJA1103) - One SGMII SERDES lane towards an internal connector, attached to one of the SJA1110 switch ports On board rev A, the AR8035 RGMII PHY addresses were different than on rev B and later. This patch introduces a separate device tree for rev A. The main device tree is supposed to cover rev B and later. Signed-off-by: