add support for ds2430, 1 page, 256bit (32bytes) eeprom
(family 0x14).

Tests done:

32 bytes dump:

x@y:~# hexdump -C -n 32 /sys/bus/w1/devices/14-00000158556e/eeprom
00000000  39 39 0a 00 00 36 0a ff  ff ff ff ff ff ff ff ff
00000010  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff
00000020

34 bytes dump: 32 only displayed

x@y:~# hexdump -C -n 34 /sys/bus/w1/devices/14-00000158556e/eeprom
00000000  39 39 0a 00 00 36 0a ff  ff ff ff ff ff ff ff ff
00000010  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff
00000020

pattern write:

x@y:~# echo 123456789 > /sys/bus/w1/devices/14-00000158556e/eeprom
x@y:~# hexdump -C -n 54 /sys/bus/w1/devices/14-00000158556e/eeprom
00000000  31 32 33 34 35 36 37 38  39 0a ff ff ff ff ff ff
00000010  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff
00000020

specific address 1-byte write

x@y:~# dd if=/dev/zero of=/sys/bus/w1/devices/14-00000158556e/eeprom \
		count=1 bs=1 seek=4
1+0 records in
1+0 records out
x@y:~# hexdump -C -n 54 /sys/bus/w1/devices/14-00000158556e/eeprom
00000000  31 32 33 34 00 36 37 38  39 0a ff ff ff ff ff ff
00000010  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff
00000020

writing binary block

x@y:~# cat dump-128bytes.bin > /sys/bus/w1/devices/14-00000158556e/eeprom
cat: write error: File too large

x@y:~# cat dump-32bytes.bin > /sys/bus/w1/devices/14-00000158556e/eeprom
x@y:~# hexdump -C -n 54 /sys/bus/w1/devices/14-00000158556e/eeprom
00000000  10 0b 5b ff ff ff ff ff  ff ff ff ff ff ff ff ff
00000010  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff 40
00000020
Signed-off-by: Angelo Dureghello <angelo.dureghello@timesys.com>
Link: https://lore.kernel.org/r/20191019204015.61474-1-angelo.dureghello@timesys.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>