habanalabs/gaudi: disable CGM at HW initialization

In case the clock gating was enabled in preboot we need to disable it
at the H/W initialization stage before touching the MME/TPC registers.
Otherwise, the ASIC can get stuck. If the security is enabled in
the firmware level, the CGM is always disabled and the driver can't
enable it.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

drivers/misc/habanalabs/gaudi/gaudi.c

@@ -2403,8 +2403,6 @@ static void gaudi_init_golden_registers(struct hl_device *hdev)
 	gaudi_init_e2e(hdev);
 	gaudi_init_hbm_cred(hdev);
 
-	hdev->asic_funcs->disable_clock_gating(hdev);
-
 	for (tpc_id = 0, tpc_offset = 0;
 				tpc_id < TPC_NUMBER_OF_ENGINES;
 				tpc_id++, tpc_offset += TPC_CFG_OFFSET) {
@@ -3416,6 +3414,9 @@ static void gaudi_set_clock_gating(struct hl_device *hdev)
 	if (hdev->in_debug)
 		return;
 
+	if (!hdev->asic_prop.fw_security_disabled)
+		return;
+
 	for (i = GAUDI_PCI_DMA_1, qman_offset = 0 ; i < GAUDI_HBM_DMA_1 ; i++) {
 		enable = !!(hdev->clock_gating_mask &
 				(BIT_ULL(gaudi_dma_assignment[i])));
@@ -3467,7 +3468,7 @@ static void gaudi_disable_clock_gating(struct hl_device *hdev)
 	u32 qman_offset;
 	int i;
 
-	if (!(gaudi->hw_cap_initialized & HW_CAP_CLK_GATE))
+	if (!hdev->asic_prop.fw_security_disabled)
 		return;
 
 	for (i = 0, qman_offset = 0 ; i < DMA_NUMBER_OF_CHANNELS ; i++) {
@@ -3801,6 +3802,13 @@ static int gaudi_hw_init(struct hl_device *hdev)
 		return rc;
 	}
 
+	/* In case the clock gating was enabled in preboot we need to disable
+	 * it here before touching the MME/TPC registers.
+	 * There is no need to take clk gating mutex because when this function
+	 * runs, no other relevant code can run
+	 */
+	hdev->asic_funcs->disable_clock_gating(hdev);
+
 	/* SRAM scrambler must be initialized after CPU is running from HBM */
 	gaudi_init_scrambler_sram(hdev);
 

drivers/misc/habanalabs/include/common/hl_boot_if.h

@@ -150,6 +150,10 @@
  * CPU_BOOT_DEV_STS0_PLL_INFO_EN	FW retrieval of PLL info is enabled.
  *					Initialized in: linux
  *
+ * CPU_BOOT_DEV_STS0_CLK_GATE_EN	Clock Gating enabled.
+ *					FW initialized Clock Gating.
+ *					Initialized in: preboot
+ *
  * CPU_BOOT_DEV_STS0_ENABLED		Device status register enabled.
  *					This is a main indication that the
  *					running FW populates the device status
@@ -171,6 +175,7 @@
 #define CPU_BOOT_DEV_STS0_DRAM_SCR_EN			(1 << 9)
 #define CPU_BOOT_DEV_STS0_FW_HARD_RST_EN		(1 << 10)
 #define CPU_BOOT_DEV_STS0_PLL_INFO_EN			(1 << 11)
+#define CPU_BOOT_DEV_STS0_CLK_GATE_EN			(1 << 13)
 #define CPU_BOOT_DEV_STS0_ENABLED			(1 << 31)
 
 enum cpu_boot_status {