Merge tag 'i2c-for-6.8-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:
 "Two patches from Heiner for the i801 are targeting muxes discovered
  while working on some other features. Essentially, there is a
  reordering when adding optional slaves and proper cleanup upon
  registering a mux device.

  Christophe fixes the exit path in the wmt driver that was leaving the
  clocks hanging, and the last fix from Tommy avoids false error reports
  in IRQ"

* tag 'i2c-for-6.8-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: aspeed: Fix the dummy irq expected print
  i2c: wmt: Fix an error handling path in wmt_i2c_probe()
  i2c: i801: Avoid potential double call to gpiod_remove_lookup_table
  i2c: i801: Fix using mux_pdev before it's set

drivers/i2c/busses/i2c-aspeed.c

@@ -445,6 +445,7 @@ static u32 aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus, u32 irq_status)
 			irq_status);
 		irq_handled |= (irq_status & ASPEED_I2CD_INTR_MASTER_ERRORS);
 		if (bus->master_state != ASPEED_I2C_MASTER_INACTIVE) {
+			irq_handled = irq_status;
 			bus->cmd_err = ret;
 			bus->master_state = ASPEED_I2C_MASTER_INACTIVE;
 			goto out_complete;

drivers/i2c/busses/i2c-i801.c

@@ -1416,7 +1416,6 @@ static void i801_add_mux(struct i801_priv *priv)
 		lookup->table[i] = GPIO_LOOKUP(mux_config->gpio_chip,
 					       mux_config->gpios[i], "mux", 0);
 	gpiod_add_lookup_table(lookup);
-	priv->lookup = lookup;
 
 	/*
 	 * Register the mux device, we use PLATFORM_DEVID_NONE here
@@ -1430,7 +1429,10 @@ static void i801_add_mux(struct i801_priv *priv)
 				sizeof(struct i2c_mux_gpio_platform_data));
 	if (IS_ERR(priv->mux_pdev)) {
 		gpiod_remove_lookup_table(lookup);
+		devm_kfree(dev, lookup);
 		dev_err(dev, "Failed to register i2c-mux-gpio device\n");
+	} else {
+		priv->lookup = lookup;
 	}
 }
 
@@ -1742,9 +1744,9 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
 
 	i801_enable_host_notify(&priv->adapter);
 
-	i801_probe_optional_slaves(priv);
 	/* We ignore errors - multiplexing is optional */
 	i801_add_mux(priv);
+	i801_probe_optional_slaves(priv);
 
 	pci_set_drvdata(dev, priv);
 

drivers/i2c/busses/i2c-wmt.c

@@ -378,11 +378,15 @@ static int wmt_i2c_probe(struct platform_device *pdev)
 
 	err = i2c_add_adapter(adap);
 	if (err)
-		return err;
+		goto err_disable_clk;
 
 	platform_set_drvdata(pdev, i2c_dev);
 
 	return 0;
+
+err_disable_clk:
+	clk_disable_unprepare(i2c_dev->clk);
+	return err;
 }
 
 static void wmt_i2c_remove(struct platform_device *pdev)