Commit 00ccd263 authored by Hans Verkuil's avatar Hans Verkuil Committed by Mauro Carvalho Chehab

media: cec-gpio: use disable/enable_irq

Due to limitations in gpiolib it was impossible to disable the interrupt of
an input gpio and then switch it to gpio output and drive it. The only way
to achieve that was to free the interrupt first, then switch the direction.

When going back to gpio input and using interrupts to read the gpio pin you
had to request the irq again.

This limitation was lifted in gpiolib in kernel 4.20, but the cec-gpio driver
was still using the old workaround implementation.

This patch updates the cec-gpio driver to just enable and disable the irq.
Signed-off-by: default avatarHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab+samsung@kernel.org>
parent 354cf003
......@@ -17,7 +17,6 @@ struct cec_gpio {
struct gpio_desc *cec_gpio;
int cec_irq;
bool cec_is_low;
bool cec_have_irq;
struct gpio_desc *hpd_gpio;
int hpd_irq;
......@@ -55,9 +54,6 @@ static void cec_gpio_low(struct cec_adapter *adap)
if (cec->cec_is_low)
return;
if (WARN_ON_ONCE(cec->cec_have_irq))
free_irq(cec->cec_irq, cec);
cec->cec_have_irq = false;
cec->cec_is_low = true;
gpiod_set_value(cec->cec_gpio, 0);
}
......@@ -114,14 +110,7 @@ static bool cec_gpio_enable_irq(struct cec_adapter *adap)
{
struct cec_gpio *cec = cec_get_drvdata(adap);
if (cec->cec_have_irq)
return true;
if (request_irq(cec->cec_irq, cec_gpio_irq_handler,
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
adap->name, cec))
return false;
cec->cec_have_irq = true;
enable_irq(cec->cec_irq);
return true;
}
......@@ -129,9 +118,7 @@ static void cec_gpio_disable_irq(struct cec_adapter *adap)
{
struct cec_gpio *cec = cec_get_drvdata(adap);
if (cec->cec_have_irq)
free_irq(cec->cec_irq, cec);
cec->cec_have_irq = false;
disable_irq(cec->cec_irq);
}
static void cec_gpio_status(struct cec_adapter *adap, struct seq_file *file)
......@@ -139,8 +126,7 @@ static void cec_gpio_status(struct cec_adapter *adap, struct seq_file *file)
struct cec_gpio *cec = cec_get_drvdata(adap);
seq_printf(file, "mode: %s\n", cec->cec_is_low ? "low-drive" : "read");
if (cec->cec_have_irq)
seq_printf(file, "using irq: %d\n", cec->cec_irq);
seq_printf(file, "using irq: %d\n", cec->cec_irq);
if (cec->hpd_gpio)
seq_printf(file, "hpd: %s\n",
cec->hpd_is_high ? "high" : "low");
......@@ -215,6 +201,14 @@ static int cec_gpio_probe(struct platform_device *pdev)
if (IS_ERR(cec->adap))
return PTR_ERR(cec->adap);
ret = devm_request_irq(dev, cec->cec_irq, cec_gpio_irq_handler,
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
cec->adap->name, cec);
if (ret)
return ret;
cec_gpio_disable_irq(cec->adap);
if (cec->hpd_gpio) {
cec->hpd_irq = gpiod_to_irq(cec->hpd_gpio);
ret = devm_request_threaded_irq(dev, cec->hpd_irq,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment