drm/i915/chv: Update Cherryview DPLL changes to support Port D. v2

The additional DPLL registers added to support Port D.  Besides, add
some new PHY control and status registers based on B-spec.

v2: Based on Ville review
	- Corrected DPIO_PHY_STATUS offset and name.
    - Rebase based on upstream change after introduce enum dpio_phy and
      enum dpio_channel.

v3: Rebased on top of Antti's 3-pipe prep patch. Note that the new offsets for
the DPLL registers aren't in place yet, so this introduces a slight regression.
But since 3 pipe support isn't fully enabled yet anyaway in -internal this
shouldn't matter too much.
Signed-off-by: Chon Ming Lee <chon.ming.lee@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drivers/gpu/drm/i915/i915_reg.h

@@ -29,6 +29,8 @@
 #define _TRANSCODER(tran, a, b) ((a) + (tran)*((b)-(a)))
 
 #define _PORT(port, a, b) ((a) + (port)*((b)-(a)))
+#define _PIPE3(pipe, a, b, c) (pipe < 2 ? _PIPE(pipe, a, b) : c)
+#define _PORT3(port, a, b, c) (port < 2 ? _PORT(port, a, b) : c)
 
 #define _MASKED_BIT_ENABLE(a) (((a) << 16) | (a))
 #define _MASKED_BIT_DISABLE(a) ((a) << 16)
@@ -1417,6 +1419,10 @@ enum punit_power_well {
 #define   DPLL_PORTB_READY_MASK		(0xf)
 
 #define   DPLL_FPA01_P1_POST_DIV_MASK_I830	0x001f0000
+
+/* Additional CHV pll/phy registers */
+#define DPIO_PHY_STATUS			(VLV_DISPLAY_BASE + 0x6240)
+#define   DPLL_PORTD_READY_MASK		(0xf)
 /*
  * The i830 generation, in LVDS mode, defines P1 as the bit number set within
  * this field (only one bit may be set).

drivers/gpu/drm/i915/intel_display.c

@@ -1535,21 +1535,28 @@ void vlv_wait_port_ready(struct drm_i915_private *dev_priv,
 		struct intel_digital_port *dport)
 {
 	u32 port_mask;
+	int dpll_reg;
 
 	switch (dport->port) {
 	case PORT_B:
 		port_mask = DPLL_PORTB_READY_MASK;
+		dpll_reg = DPLL(0);
 		break;
 	case PORT_C:
 		port_mask = DPLL_PORTC_READY_MASK;
+		dpll_reg = DPLL(0);
+		break;
+	case PORT_D:
+		port_mask = DPLL_PORTD_READY_MASK;
+		dpll_reg = DPIO_PHY_STATUS;
 		break;
 	default:
 		BUG();
 	}
 
-	if (wait_for((I915_READ(DPLL(0)) & port_mask) == 0, 1000))
+	if (wait_for((I915_READ(dpll_reg) & port_mask) == 0, 1000))
 		WARN(1, "timed out waiting for port %c ready: 0x%08x\n",
-		     port_name(dport->port), I915_READ(DPLL(0)));
+		     port_name(dport->port), I915_READ(dpll_reg));
 }
 
 /**

drivers/gpu/drm/i915/intel_drv.h

@@ -561,6 +561,7 @@ vlv_dport_to_channel(struct intel_digital_port *dport)
 {
 	switch (dport->port) {
 	case PORT_B:
+	case PORT_D:
 		return DPIO_CH0;
 	case PORT_C:
 		return DPIO_CH1;