arm64: dts: renesas: beacon: Fix LVDS PWM Backlight

The backlight didn't really work correctly due to some updates that were
made in hardware.  It should be safe to apply these, because the older
hardware was never shipped to anyone, so it shouldn't break anything.
Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20201213183759.223246-8-aford173@gmail.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi

@@ -10,8 +10,8 @@ / {
 	backlight_lvds: backlight-lvds {
 		compatible = "pwm-backlight";
 		power-supply = <&reg_lcd>;
-		enable-gpios = <&gpio_exp1 3 GPIO_ACTIVE_LOW>;
-		pwms = <&pwm2 0 50000>;
+		enable-gpios = <&gpio_exp1 3 GPIO_ACTIVE_HIGH>;
+		pwms = <&pwm2 0 25000>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <6>;
 	};
@@ -118,9 +118,9 @@ panel-timing {
 			hback-porch = <40>;
 			vfront-porch = <13>;
 			vback-porch = <29>;
-			vsync-len = <3>;
+			vsync-len = <1>;
 			hsync-active = <1>;
-			vsync-active = <1>;
+			vsync-active = <3>;
 			de-active = <1>;
 			pixelclk-active = <0>;
 		};
@@ -541,7 +541,7 @@ pwm0_pins: pwm0 {
 
 	pwm2_pins: pwm2 {
 		groups = "pwm2_a";
-		function = "pwm2_a";
+		function = "pwm2";
 	};
 
 	sdhi0_pins: sd0 {