Commit 0154252a authored by Krzysztof Kozlowski's avatar Krzysztof Kozlowski Committed by Bjorn Andersson

ARM: dts: qcom: apq8084-ifc6540: fix overriding SDHCI

While changing node names of APQ8084 SDHCI, the ones in IFC6540 board
were not updated leading to disabled and misconfigured SDHCI.

Cc: <stable@vger.kernel.org>
Fixes: 2477d819 ("ARM: dts: qcom: Fix sdhci node names - use 'mmc@'")
Signed-off-by: default avatarKrzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: default avatarDmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: default avatarBjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221204084614.12193-1-krzysztof.kozlowski@linaro.org
parent 1b929c02
...@@ -19,16 +19,16 @@ soc { ...@@ -19,16 +19,16 @@ soc {
serial@f995e000 { serial@f995e000 {
status = "okay"; status = "okay";
}; };
};
};
sdhci@f9824900 { &sdhc_1 {
bus-width = <8>; bus-width = <8>;
non-removable; non-removable;
status = "okay"; status = "okay";
}; };
sdhci@f98a4900 { &sdhc_2 {
cd-gpios = <&tlmm 122 GPIO_ACTIVE_LOW>; cd-gpios = <&tlmm 122 GPIO_ACTIVE_LOW>;
bus-width = <4>; bus-width = <4>;
};
};
}; };
...@@ -421,7 +421,7 @@ blsp2_uart2: serial@f995e000 { ...@@ -421,7 +421,7 @@ blsp2_uart2: serial@f995e000 {
status = "disabled"; status = "disabled";
}; };
mmc@f9824900 { sdhc_1: mmc@f9824900 {
compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4"; compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4";
reg = <0xf9824900 0x11c>, <0xf9824000 0x800>; reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
reg-names = "hc", "core"; reg-names = "hc", "core";
...@@ -434,7 +434,7 @@ mmc@f9824900 { ...@@ -434,7 +434,7 @@ mmc@f9824900 {
status = "disabled"; status = "disabled";
}; };
mmc@f98a4900 { sdhc_2: mmc@f98a4900 {
compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4"; compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4";
reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
reg-names = "hc", "core"; reg-names = "hc", "core";
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment