Commit 0171b073 authored by Grzegorz Szymaszek's avatar Grzegorz Szymaszek Committed by Alexandre Torgue

ARM: dts: stm32: fix stm32mp157c-odyssey card detect pin

The microSD card detect pin is physically connected to the MPU pin PI3.
The Device Tree configuration of the card detect pin was wrong—it was
set to pin PB7 instead. If such configuration was used, the kernel would
hang on “Waiting for root device” when booting from a microSD card.
Signed-off-by: default avatarGrzegorz Szymaszek <gszymaszek@short.pl>
Signed-off-by: default avatarAlexandre Torgue <alexandre.torgue@foss.st.com>
parent c90b2c4f
...@@ -64,7 +64,7 @@ &sdmmc1 { ...@@ -64,7 +64,7 @@ &sdmmc1 {
pinctrl-0 = <&sdmmc1_b4_pins_a>; pinctrl-0 = <&sdmmc1_b4_pins_a>;
pinctrl-1 = <&sdmmc1_b4_od_pins_a>; pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
cd-gpios = <&gpiob 7 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; cd-gpios = <&gpioi 3 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
disable-wp; disable-wp;
st,neg-edge; st,neg-edge;
bus-width = <4>; bus-width = <4>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment