Commit 01d41c9c authored by Fugang Duan's avatar Fugang Duan Committed by Shawn Guo

ARM: dts: imx6sl: add fec sleep pinctrl for pin PM state

when system suspend, need to set pins to low power state to
save IO power consumption, there are three states of pinctrl:
"default", "idle" and "sleep". Currently enet supports default
and sleep state.
Signed-off-by: default avatarFugang Duan <B38611@freescale.com>
Signed-off-by: default avatarShawn Guo <shawn.guo@freescale.com>
parent f3c72380
...@@ -116,8 +116,9 @@ flash: m25p80@0 { ...@@ -116,8 +116,9 @@ flash: m25p80@0 {
}; };
&fec { &fec {
pinctrl-names = "default"; pinctrl-names = "default", "sleep";
pinctrl-0 = <&pinctrl_fec>; pinctrl-0 = <&pinctrl_fec>;
pinctrl-1 = <&pinctrl_fec_sleep>;
phy-mode = "rmii"; phy-mode = "rmii";
status = "okay"; status = "okay";
}; };
...@@ -300,6 +301,19 @@ MX6SL_PAD_FEC_REF_CLK__FEC_REF_OUT 0x4001b0a8 ...@@ -300,6 +301,19 @@ MX6SL_PAD_FEC_REF_CLK__FEC_REF_OUT 0x4001b0a8
>; >;
}; };
pinctrl_fec_sleep: fecgrp-sleep {
fsl,pins = <
MX6SL_PAD_FEC_MDC__GPIO4_IO23 0x3080
MX6SL_PAD_FEC_CRS_DV__GPIO4_IO25 0x3080
MX6SL_PAD_FEC_RXD0__GPIO4_IO17 0x3080
MX6SL_PAD_FEC_RXD1__GPIO4_IO18 0x3080
MX6SL_PAD_FEC_TX_EN__GPIO4_IO22 0x3080
MX6SL_PAD_FEC_TXD0__GPIO4_IO24 0x3080
MX6SL_PAD_FEC_TXD1__GPIO4_IO16 0x3080
MX6SL_PAD_FEC_REF_CLK__GPIO4_IO26 0x3080
>;
};
pinctrl_i2c1: i2c1grp { pinctrl_i2c1: i2c1grp {
fsl,pins = < fsl,pins = <
MX6SL_PAD_I2C1_SCL__I2C1_SCL 0x4001b8b1 MX6SL_PAD_I2C1_SCL__I2C1_SCL 0x4001b8b1
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment