Skip to content

L
linux
Commit 0292f8a8 authored by Arnd Bergmann's avatar Arnd Bergmann
Browse files
Options

Merge tag 'uniphier-dt-v4.15' of... 

Merge tag 'uniphier-dt-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into next/dt

Pull "UniPhier ARM SoC DT updates for v4.15" from Masahiro Yamada:

- add thermal monitor and thermal zone nodes
- fix W=2 warnings
- add GPIO controller nodes and related properties
- add resets properties

* tag 'uniphier-dt-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
  ARM: dts: uniphier: add resets properties
  ARM: dts: uniphier: add GPIO hog definition
  ARM: dts: uniphier: route on-board device IRQ to GPIO controller
  ARM: dts: uniphier: add GPIO controller nodes
  ARM: dts: uniphier: fix W=2 build warnings
  ARM: dts: uniphier: add nodes of thermal monitor and thermal zone for PXs2
parents 2132910e a1763a82
Hide whitespace changes
Inline Side-by-side
Showing with 240 additions and 39 deletions
arch/arm/boot/dts/uniphier-ld4-ref.dts
View file @ 0292f8a8
......@@ -38,7 +38,7 @@ memory@80000000 {
};
&ethsc {
interrupts = <0 49 4>;
interrupts = <1 8>;
};
&serial0 {
......@@ -53,6 +53,14 @@ &serial3 {
status = "okay";
};
&gpio {
xirq1 {
gpio-hog;
gpios = <121 0>;
input;
};
};
&i2c0 {
status = "okay";
};
......
arch/arm/boot/dts/uniphier-ld4.dtsi
View file @ 0292f8a8
......@@ -37,7 +37,7 @@ refclk: ref {
clock-frequency = <24576000>;
};
arm_timer_clk: arm_timer_clk {
arm_timer_clk: arm-timer {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <50000000>;
......@@ -71,6 +71,7 @@ serial0: serial@54006800 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
clocks = <&peri_clk 0>;
resets = <&peri_rst 0>;
};
serial1: serial@54006900 {
......@@ -81,6 +82,7 @@ serial1: serial@54006900 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
clocks = <&peri_clk 1>;
resets = <&peri_rst 1>;
};
serial2: serial@54006a00 {
......@@ -91,6 +93,7 @@ serial2: serial@54006a00 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
clocks = <&peri_clk 2>;
resets = <&peri_rst 2>;
};
serial3: serial@54006b00 {
......@@ -101,6 +104,21 @@ serial3: serial@54006b00 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
clocks = <&peri_clk 3>;
resets = <&peri_rst 3>;
};
gpio: gpio@55000000 {
compatible = "socionext,uniphier-gpio";
reg = <0x55000000 0x200>;
interrupt-parent = <&aidet>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pinctrl 0 0 0>;
gpio-ranges-group-names = "gpio_range";
ngpios = <136>;
socionext,interrupt-ranges = <0 48 13>, <14 62 2>;
};
i2c0: i2c@58400000 {
......@@ -113,6 +131,7 @@ i2c0: i2c@58400000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c0>;
clocks = <&peri_clk 4>;
resets = <&peri_rst 4>;
clock-frequency = <100000>;
};
......@@ -126,6 +145,7 @@ i2c1: i2c@58480000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
clocks = <&peri_clk 5>;
resets = <&peri_rst 5>;
clock-frequency = <100000>;
};
......@@ -139,6 +159,7 @@ i2c2: i2c@58500000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
clocks = <&peri_clk 6>;
resets = <&peri_rst 6>;
clock-frequency = <400000>;
};
......@@ -152,6 +173,7 @@ i2c3: i2c@58580000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
clocks = <&peri_clk 7>;
resets = <&peri_rst 7>;
clock-frequency = <100000>;
};
......@@ -302,6 +324,7 @@ nand: nand@68000000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand2cs>;
clocks = <&sys_clk 2>;
resets = <&sys_rst 2>;
};
};
};
......
arch/arm/boot/dts/uniphier-ld6b-ref.dts
View file @ 0292f8a8
......@@ -40,7 +40,7 @@ memory@80000000 {
};
&ethsc {
interrupts = <0 52 4>;
interrupts = <4 8>;
};
&serial0 {
......@@ -55,6 +55,14 @@ &serial2 {
status = "okay";
};
&gpio {
xirq4 {
gpio-hog;
gpios = <124 0>;
input;
};
};
&i2c0 {
status = "okay";
};
......
arch/arm/boot/dts/uniphier-pinctrl.dtsi
View file @ 0292f8a8
......@@ -8,117 +8,117 @@
*/
&pinctrl {
pinctrl_aout: aout_grp {
pinctrl_aout: aout {
groups = "aout";
function = "aout";
};
pinctrl_emmc: emmc_grp {
pinctrl_emmc: emmc {
groups = "emmc", "emmc_dat8";
function = "emmc";
};
pinctrl_ether_mii: ether_mii_grp {
pinctrl_ether_mii: ether-mii {
groups = "ether_mii";
function = "ether_mii";
};
pinctrl_ether_rgmii: ether_rgmii_grp {
pinctrl_ether_rgmii: ether-rgmii {
groups = "ether_rgmii";
function = "ether_rgmii";
};
pinctrl_ether_rmii: ether_rmii_grp {
pinctrl_ether_rmii: ether-rmii {
groups = "ether_rmii";
function = "ether_rmii";
};
pinctrl_i2c0: i2c0_grp {
pinctrl_i2c0: i2c0 {
groups = "i2c0";
function = "i2c0";
};
pinctrl_i2c1: i2c1_grp {
pinctrl_i2c1: i2c1 {
groups = "i2c1";
function = "i2c1";
};
pinctrl_i2c2: i2c2_grp {
pinctrl_i2c2: i2c2 {
groups = "i2c2";
function = "i2c2";
};
pinctrl_i2c3: i2c3_grp {
pinctrl_i2c3: i2c3 {
groups = "i2c3";
function = "i2c3";
};
pinctrl_i2c4: i2c4_grp {
pinctrl_i2c4: i2c4 {
groups = "i2c4";
function = "i2c4";
};
pinctrl_nand: nand_grp {
pinctrl_nand: nand {
groups = "nand";
function = "nand";
};
pinctrl_nand2cs: nand2cs_grp {
pinctrl_nand2cs: nand2cs {
groups = "nand", "nand_cs1";
function = "nand";
};
pinctrl_sd: sd_grp {
pinctrl_sd: sd {
groups = "sd";
function = "sd";
};
pinctrl_sd1: sd1_grp {
pinctrl_sd1: sd1 {
groups = "sd1";
function = "sd1";
};
pinctrl_system_bus: system_bus_grp {
pinctrl_system_bus: system-bus {
groups = "system_bus", "system_bus_cs1";
function = "system_bus";
};
pinctrl_uart0: uart0_grp {
pinctrl_uart0: uart0 {
groups = "uart0";
function = "uart0";
};
pinctrl_uart1: uart1_grp {
pinctrl_uart1: uart1 {
groups = "uart1";
function = "uart1";
};
pinctrl_uart2: uart2_grp {
pinctrl_uart2: uart2 {
groups = "uart2";
function = "uart2";
};
pinctrl_uart3: uart3_grp {
pinctrl_uart3: uart3 {
groups = "uart3";
function = "uart3";
};
pinctrl_usb0: usb0_grp {
pinctrl_usb0: usb0 {
groups = "usb0";
function = "usb0";
};
pinctrl_usb1: usb1_grp {
pinctrl_usb1: usb1 {
groups = "usb1";
function = "usb1";
};
pinctrl_usb2: usb2_grp {
pinctrl_usb2: usb2 {
groups = "usb2";
function = "usb2";
};
pinctrl_usb3: usb3_grp {
pinctrl_usb3: usb3 {
groups = "usb3";
function = "usb3";
};
......
arch/arm/boot/dts/uniphier-pro4-ref.dts
View file @ 0292f8a8
......@@ -40,7 +40,7 @@ memory@80000000 {
};
&ethsc {
interrupts = <0 50 4>;
interrupts = <2 8>;
};
&serial0 {
......@@ -55,6 +55,14 @@ &serial2 {
status = "okay";
};
&gpio {
xirq2 {
gpio-hog;
gpios = <122 0>;
input;
};
};
&i2c0 {
status = "okay";
};
......
arch/arm/boot/dts/uniphier-pro4.dtsi
View file @ 0292f8a8
......@@ -45,7 +45,7 @@ refclk: ref {
clock-frequency = <25000000>;
};
arm_timer_clk: arm_timer_clk {
arm_timer_clk: arm-timer {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <50000000>;
......@@ -79,6 +79,7 @@ serial0: serial@54006800 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
clocks = <&peri_clk 0>;
resets = <&peri_rst 0>;
};
serial1: serial@54006900 {
......@@ -89,6 +90,7 @@ serial1: serial@54006900 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
clocks = <&peri_clk 1>;
resets = <&peri_rst 1>;
};
serial2: serial@54006a00 {
......@@ -99,6 +101,7 @@ serial2: serial@54006a00 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
clocks = <&peri_clk 2>;
resets = <&peri_rst 2>;
};
serial3: serial@54006b00 {
......@@ -109,6 +112,21 @@ serial3: serial@54006b00 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
clocks = <&peri_clk 3>;
resets = <&peri_rst 3>;
};
gpio: gpio@55000000 {
compatible = "socionext,uniphier-gpio";
reg = <0x55000000 0x200>;
interrupt-parent = <&aidet>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pinctrl 0 0 0>;
gpio-ranges-group-names = "gpio_range";
ngpios = <248>;
socionext,interrupt-ranges = <0 48 16>, <16 154 5>;
};
i2c0: i2c@58780000 {
......@@ -121,6 +139,7 @@ i2c0: i2c@58780000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c0>;
clocks = <&peri_clk 4>;
resets = <&peri_rst 4>;
clock-frequency = <100000>;
};
......@@ -134,6 +153,7 @@ i2c1: i2c@58781000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
clocks = <&peri_clk 5>;
resets = <&peri_rst 5>;
clock-frequency = <100000>;
};
......@@ -147,6 +167,7 @@ i2c2: i2c@58782000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
clocks = <&peri_clk 6>;
resets = <&peri_rst 6>;
clock-frequency = <100000>;
};
......@@ -160,6 +181,7 @@ i2c3: i2c@58783000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
clocks = <&peri_clk 7>;
resets = <&peri_rst 7>;
clock-frequency = <100000>;
};
......@@ -173,6 +195,7 @@ i2c5: i2c@58785000 {
#size-cells = <0>;
interrupts = <0 25 4>;
clocks = <&peri_clk 9>;
resets = <&peri_rst 9>;
clock-frequency = <400000>;
};
......@@ -184,6 +207,7 @@ i2c6: i2c@58786000 {
#size-cells = <0>;
interrupts = <0 26 4>;
clocks = <&peri_clk 10>;
resets = <&peri_rst 10>;
clock-frequency = <400000>;
};
......@@ -322,6 +346,7 @@ nand: nand@68000000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand>;
clocks = <&sys_clk 2>;
resets = <&sys_rst 2>;
};
};
};
......
arch/arm/boot/dts/uniphier-pro5.dtsi
View file @ 0292f8a8
......@@ -37,7 +37,7 @@ cpu@1 {
};
};
cpu_opp: opp_table {
cpu_opp: opp-table {
compatible = "operating-points-v2";
opp-shared;
......@@ -119,7 +119,7 @@ refclk: ref {
clock-frequency = <20000000>;
};
arm_timer_clk: arm_timer_clk {
arm_timer_clk: arm-timer {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <50000000>;
......@@ -166,6 +166,7 @@ serial0: serial@54006800 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
clocks = <&peri_clk 0>;
resets = <&peri_rst 0>;
};
serial1: serial@54006900 {
......@@ -176,6 +177,7 @@ serial1: serial@54006900 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
clocks = <&peri_clk 1>;
resets = <&peri_rst 1>;
};
serial2: serial@54006a00 {
......@@ -186,6 +188,7 @@ serial2: serial@54006a00 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
clocks = <&peri_clk 2>;
resets = <&peri_rst 2>;
};
serial3: serial@54006b00 {
......@@ -196,6 +199,21 @@ serial3: serial@54006b00 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
clocks = <&peri_clk 3>;
resets = <&peri_rst 3>;
};
gpio: gpio@55000000 {
compatible = "socionext,uniphier-gpio";
reg = <0x55000000 0x200>;
interrupt-parent = <&aidet>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pinctrl 0 0 0>;
gpio-ranges-group-names = "gpio_range";
ngpios = <248>;
socionext,interrupt-ranges = <0 48 16>, <16 154 5>;
};
i2c0: i2c@58780000 {
......@@ -208,6 +226,7 @@ i2c0: i2c@58780000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c0>;
clocks = <&peri_clk 4>;
resets = <&peri_rst 4>;
clock-frequency = <100000>;
};
......@@ -221,6 +240,7 @@ i2c1: i2c@58781000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
clocks = <&peri_clk 5>;
resets = <&peri_rst 5>;
clock-frequency = <100000>;
};
......@@ -234,6 +254,7 @@ i2c2: i2c@58782000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
clocks = <&peri_clk 6>;
resets = <&peri_rst 6>;
clock-frequency = <100000>;
};
......@@ -247,6 +268,7 @@ i2c3: i2c@58783000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
clocks = <&peri_clk 7>;
resets = <&peri_rst 7>;
clock-frequency = <100000>;
};
......@@ -260,6 +282,7 @@ i2c5: i2c@58785000 {
#size-cells = <0>;
interrupts = <0 25 4>;
clocks = <&peri_clk 9>;
resets = <&peri_rst 9>;
clock-frequency = <400000>;
};
......@@ -271,6 +294,7 @@ i2c6: i2c@58786000 {
#size-cells = <0>;
interrupts = <0 26 4>;
clocks = <&peri_clk 10>;
resets = <&peri_rst 10>;
clock-frequency = <400000>;
};
......@@ -385,6 +409,7 @@ nand: nand@68000000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand2cs>;
clocks = <&sys_clk 2>;
resets = <&sys_rst 2>;
};
};
};
......
arch/arm/boot/dts/uniphier-pxs2.dtsi
View file @ 0292f8a8
......@@ -7,6 +7,8 @@
* SPDX-License-Identifier: (GPL-2.0+ OR MIT)
*/
#include <dt-bindings/thermal/thermal.h>
/ {
compatible = "socionext,uniphier-pxs2";
#address-cells = <1>;
......@@ -16,7 +18,7 @@ cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0>;
......@@ -24,9 +26,10 @@ cpu@0 {
enable-method = "psci";
next-level-cache = <&l2>;
operating-points-v2 = <&cpu_opp>;
#cooling-cells = <2>;
};
cpu@1 {
cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <1>;
......@@ -36,7 +39,7 @@ cpu@1 {
operating-points-v2 = <&cpu_opp>;
};
cpu@2 {
cpu2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <2>;
......@@ -46,7 +49,7 @@ cpu@2 {
operating-points-v2 = <&cpu_opp>;
};
cpu@3 {
cpu3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <3>;
......@@ -57,7 +60,7 @@ cpu@3 {
};
};
cpu_opp: opp_table {
cpu_opp: opp-table {
compatible = "operating-points-v2";
opp-shared;
......@@ -107,13 +110,42 @@ refclk: ref {
clock-frequency = <25000000>;
};
arm_timer_clk: arm_timer_clk {
arm_timer_clk: arm-timer {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <50000000>;
};
};
thermal-zones {
cpu-thermal {
polling-delay-passive = <250>; /* 250ms */
polling-delay = <1000>; /* 1000ms */
thermal-sensors = <&pvtctl>;
trips {
cpu_crit: cpu-crit {
temperature = <95000>; /* 95C */
hysteresis = <2000>;
type = "critical";
};
cpu_alert: cpu-alert {
temperature = <85000>; /* 85C */
hysteresis = <2000>;
type = "passive";
};
};
cooling-maps {
map {
trip = <&cpu_alert>;
cooling-device = <&cpu0
THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
};
soc {
compatible = "simple-bus";
#address-cells = <1>;
......@@ -141,6 +173,7 @@ serial0: serial@54006800 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
clocks = <&peri_clk 0>;
resets = <&peri_rst 0>;
};
serial1: serial@54006900 {
......@@ -151,6 +184,7 @@ serial1: serial@54006900 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
clocks = <&peri_clk 1>;
resets = <&peri_rst 1>;
};
serial2: serial@54006a00 {
......@@ -161,6 +195,7 @@ serial2: serial@54006a00 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
clocks = <&peri_clk 2>;
resets = <&peri_rst 2>;
};
serial3: serial@54006b00 {
......@@ -171,6 +206,24 @@ serial3: serial@54006b00 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
clocks = <&peri_clk 3>;
resets = <&peri_rst 3>;
};
gpio: gpio@55000000 {
compatible = "socionext,uniphier-gpio";
reg = <0x55000000 0x200>;
interrupt-parent = <&aidet>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pinctrl 0 0 0>,
<&pinctrl 96 0 0>;
gpio-ranges-group-names = "gpio_range0",
"gpio_range1";
ngpios = <232>;
socionext,interrupt-ranges = <0 48 16>, <16 154 5>,
<21 217 3>;
};
i2c0: i2c@58780000 {
......@@ -183,6 +236,7 @@ i2c0: i2c@58780000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c0>;
clocks = <&peri_clk 4>;
resets = <&peri_rst 4>;
clock-frequency = <100000>;
};
......@@ -196,6 +250,7 @@ i2c1: i2c@58781000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
clocks = <&peri_clk 5>;
resets = <&peri_rst 5>;
clock-frequency = <100000>;
};
......@@ -209,6 +264,7 @@ i2c2: i2c@58782000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
clocks = <&peri_clk 6>;
resets = <&peri_rst 6>;
clock-frequency = <100000>;
};
......@@ -222,6 +278,7 @@ i2c3: i2c@58783000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
clocks = <&peri_clk 7>;
resets = <&peri_rst 7>;
clock-frequency = <100000>;
};
......@@ -233,6 +290,7 @@ i2c4: i2c@58784000 {
#size-cells = <0>;
interrupts = <0 45 4>;
clocks = <&peri_clk 8>;
resets = <&peri_rst 8>;
clock-frequency = <400000>;
};
......@@ -244,6 +302,7 @@ i2c5: i2c@58785000 {
#size-cells = <0>;
interrupts = <0 25 4>;
clocks = <&peri_clk 9>;
resets = <&peri_rst 9>;
clock-frequency = <400000>;
};
......@@ -255,6 +314,7 @@ i2c6: i2c@58786000 {
#size-cells = <0>;
interrupts = <0 26 4>;
clocks = <&peri_clk 10>;
resets = <&peri_rst 10>;
clock-frequency = <400000>;
};
......@@ -358,6 +418,13 @@ sys_rst: reset {
compatible = "socionext,uniphier-pxs2-reset";
#reset-cells = <1>;
};
pvtctl: pvtctl {
compatible = "socionext,uniphier-pxs2-thermal";
interrupts = <0 3 4>;
#thermal-sensor-cells = <0>;
socionext,tmod-calibration = <0x0f86 0x6844>;
};
};
nand: nand@68000000 {
......@@ -369,6 +436,7 @@ nand: nand@68000000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand2cs>;
clocks = <&sys_clk 2>;
resets = <&sys_rst 2>;
};
};
};
......
arch/arm/boot/dts/uniphier-sld8-ref.dts
View file @ 0292f8a8
......@@ -38,7 +38,7 @@ memory@80000000 {
};
&ethsc {
interrupts = <0 48 4>;
interrupts = <0 8>;
};
&serial0 {
......@@ -53,6 +53,14 @@ &serial3 {
status = "okay";
};
&gpio {
xirq0 {
gpio-hog;
gpios = <120 0>;
input;
};
};
&i2c0 {
status = "okay";
};
......
arch/arm/boot/dts/uniphier-sld8.dtsi
View file @ 0292f8a8
......@@ -37,7 +37,7 @@ refclk: ref {
clock-frequency = <25000000>;
};
arm_timer_clk: arm_timer_clk {
arm_timer_clk: arm-timer {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <50000000>;
......@@ -71,6 +71,7 @@ serial0: serial@54006800 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
clocks = <&peri_clk 0>;
resets = <&peri_rst 0>;
};
serial1: serial@54006900 {
......@@ -81,6 +82,7 @@ serial1: serial@54006900 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
clocks = <&peri_clk 1>;
resets = <&peri_rst 1>;
};
serial2: serial@54006a00 {
......@@ -91,6 +93,7 @@ serial2: serial@54006a00 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
clocks = <&peri_clk 2>;
resets = <&peri_rst 2>;
};
serial3: serial@54006b00 {
......@@ -101,6 +104,25 @@ serial3: serial@54006b00 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
clocks = <&peri_clk 3>;
resets = <&peri_rst 3>;
};
gpio: gpio@55000000 {
compatible = "socionext,uniphier-gpio";
reg = <0x55000000 0x200>;
interrupt-parent = <&aidet>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pinctrl 0 0 0>,
<&pinctrl 104 0 0>,
<&pinctrl 112 0 0>;
gpio-ranges-group-names = "gpio_range0",
"gpio_range1",
"gpio_range2";
ngpios = <136>;
socionext,interrupt-ranges = <0 48 13>, <14 62 2>;
};
i2c0: i2c@58400000 {
......@@ -113,6 +135,7 @@ i2c0: i2c@58400000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c0>;
clocks = <&peri_clk 4>;
resets = <&peri_rst 4>;
clock-frequency = <100000>;
};
......@@ -126,6 +149,7 @@ i2c1: i2c@58480000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
clocks = <&peri_clk 5>;
resets = <&peri_rst 5>;
clock-frequency = <100000>;
};
......@@ -139,6 +163,7 @@ i2c2: i2c@58500000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
clocks = <&peri_clk 6>;
resets = <&peri_rst 6>;
clock-frequency = <400000>;
};
......@@ -152,6 +177,7 @@ i2c3: i2c@58580000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
clocks = <&peri_clk 7>;
resets = <&peri_rst 7>;
clock-frequency = <100000>;
};
......@@ -302,6 +328,7 @@ nand: nand@68000000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand2cs>;
clocks = <&sys_clk 2>;
resets = <&sys_rst 2>;
};
};
};
......
arch/arm/boot/dts/uniphier-support-card.dtsi
View file @ 0292f8a8
......@@ -11,11 +11,12 @@ &system_bus {
status = "okay";
ranges = <1 0x00000000 0x42000000 0x02000000>;
support_card: support_card@1,1f00000 {
support_card: support-card@1,1f00000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 1 0x01f00000 0x00100000>;
interrupt-parent = <&gpio>;
ethsc: ethernet@0 {
compatible = "smsc,lan9118", "smsc,lan9115";
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7