usb: core: Track SuperSpeed Plus GenXxY

Introduce ssp_rate field to usb_device structure to capture the
connected SuperSpeed Plus signaling rate generation and lane count with
the corresponding usb_ssp_rate enum.
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/b7805d121e5ae4ad5ae144bd860b6ac04ee47436.1615432770.git.Thinh.Nguyen@synopsys.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/usb/core/hcd.c

@@ -2721,6 +2721,7 @@ int usb_add_hcd(struct usb_hcd *hcd,
 
 	rhdev->rx_lanes = 1;
 	rhdev->tx_lanes = 1;
+	rhdev->ssp_rate = USB_SSP_GEN_UNKNOWN;
 
 	switch (hcd->speed) {
 	case HCD_USB11:
@@ -2738,8 +2739,11 @@ int usb_add_hcd(struct usb_hcd *hcd,
 	case HCD_USB32:
 		rhdev->rx_lanes = 2;
 		rhdev->tx_lanes = 2;
-		fallthrough;
+		rhdev->ssp_rate = USB_SSP_GEN_2x2;
+		rhdev->speed = USB_SPEED_SUPER_PLUS;
+		break;
 	case HCD_USB31:
+		rhdev->ssp_rate = USB_SSP_GEN_2x1;
 		rhdev->speed = USB_SPEED_SUPER_PLUS;
 		break;
 	default:

drivers/usb/core/hub.c

@@ -31,6 +31,7 @@
 #include <linux/pm_qos.h>
 #include <linux/kobject.h>
 
+#include <linux/bitfield.h>
 #include <linux/uaccess.h>
 #include <asm/byteorder.h>
 
@@ -2668,6 +2669,81 @@ int usb_authorize_device(struct usb_device *usb_dev)
 	return result;
 }
 
+/**
+ * get_port_ssp_rate - Match the extended port status to SSP rate
+ * @hdev: The hub device
+ * @ext_portstatus: extended port status
+ *
+ * Match the extended port status speed id to the SuperSpeed Plus sublink speed
+ * capability attributes. Base on the number of connected lanes and speed,
+ * return the corresponding enum usb_ssp_rate.
+ */
+static enum usb_ssp_rate get_port_ssp_rate(struct usb_device *hdev,
+					   u32 ext_portstatus)
+{
+	struct usb_ssp_cap_descriptor *ssp_cap = hdev->bos->ssp_cap;
+	u32 attr;
+	u8 speed_id;
+	u8 ssac;
+	u8 lanes;
+	int i;
+
+	if (!ssp_cap)
+		goto out;
+
+	speed_id = ext_portstatus & USB_EXT_PORT_STAT_RX_SPEED_ID;
+	lanes = USB_EXT_PORT_RX_LANES(ext_portstatus) + 1;
+
+	ssac = le32_to_cpu(ssp_cap->bmAttributes) &
+		USB_SSP_SUBLINK_SPEED_ATTRIBS;
+
+	for (i = 0; i <= ssac; i++) {
+		u8 ssid;
+
+		attr = le32_to_cpu(ssp_cap->bmSublinkSpeedAttr[i]);
+		ssid = FIELD_GET(USB_SSP_SUBLINK_SPEED_SSID, attr);
+		if (speed_id == ssid) {
+			u16 mantissa;
+			u8 lse;
+			u8 type;
+
+			/*
+			 * Note: currently asymmetric lane types are only
+			 * applicable for SSIC operate in SuperSpeed protocol
+			 */
+			type = FIELD_GET(USB_SSP_SUBLINK_SPEED_ST, attr);
+			if (type == USB_SSP_SUBLINK_SPEED_ST_ASYM_RX ||
+			    type == USB_SSP_SUBLINK_SPEED_ST_ASYM_TX)
+				goto out;
+
+			if (FIELD_GET(USB_SSP_SUBLINK_SPEED_LP, attr) !=
+			    USB_SSP_SUBLINK_SPEED_LP_SSP)
+				goto out;
+
+			lse = FIELD_GET(USB_SSP_SUBLINK_SPEED_LSE, attr);
+			mantissa = FIELD_GET(USB_SSP_SUBLINK_SPEED_LSM, attr);
+
+			/* Convert to Gbps */
+			for (; lse < USB_SSP_SUBLINK_SPEED_LSE_GBPS; lse++)
+				mantissa /= 1000;
+
+			if (mantissa >= 10 && lanes == 1)
+				return USB_SSP_GEN_2x1;
+
+			if (mantissa >= 10 && lanes == 2)
+				return USB_SSP_GEN_2x2;
+
+			if (mantissa >= 5 && lanes == 2)
+				return USB_SSP_GEN_1x2;
+
+			goto out;
+		}
+	}
+
+out:
+	return USB_SSP_GEN_UNKNOWN;
+}
+
 /*
  * Return 1 if port speed is SuperSpeedPlus, 0 otherwise
  * check it from the link protocol field of the current speed ID attribute.
@@ -2850,9 +2926,11 @@ static int hub_port_wait_reset(struct usb_hub *hub, int port1,
 		/* extended portstatus Rx and Tx lane count are zero based */
 		udev->rx_lanes = USB_EXT_PORT_RX_LANES(ext_portstatus) + 1;
 		udev->tx_lanes = USB_EXT_PORT_TX_LANES(ext_portstatus) + 1;
+		udev->ssp_rate = get_port_ssp_rate(hub->hdev, ext_portstatus);
 	} else {
 		udev->rx_lanes = 1;
 		udev->tx_lanes = 1;
+		udev->ssp_rate = USB_SSP_GEN_UNKNOWN;
 	}
 	if (hub_is_wusb(hub))
 		udev->speed = USB_SPEED_WIRELESS;

include/linux/usb.h

@@ -560,6 +560,7 @@ struct usb3_lpm_parameters {
  * @speed: device speed: high/full/low (or error)
  * @rx_lanes: number of rx lanes in use, USB 3.2 adds dual-lane support
  * @tx_lanes: number of tx lanes in use, USB 3.2 adds dual-lane support
+ * @ssp_rate: SuperSpeed Plus phy signaling rate and lane count
  * @tt: Transaction Translator info; used with low/full speed dev, highspeed hub
  * @ttport: device port on that tt hub
  * @toggle: one bit for each endpoint, with ([0] = IN, [1] = OUT) endpoints
@@ -636,6 +637,7 @@ struct usb_device {
 	enum usb_device_speed	speed;
 	unsigned int		rx_lanes;
 	unsigned int		tx_lanes;
+	enum usb_ssp_rate	ssp_rate;
 
 	struct usb_tt	*tt;
 	int		ttport;