Commit 029ee6b1 authored by Yufeng Mo's avatar Yufeng Mo Committed by Jakub Kicinski

ethtool: add two coalesce attributes for CQE mode

Currently, there are many drivers who support CQE mode configuration,
some configure it as a fixed when initialized, some provide an
interface to change it by ethtool private flags. In order to make it
more generic, add two new 'ETHTOOL_A_COALESCE_USE_CQE_TX' and
'ETHTOOL_A_COALESCE_USE_CQE_RX' coalesce attributes, then these
parameters can be accessed by ethtool netlink coalesce uAPI.

Also add an new structure kernel_ethtool_coalesce, then the
new parameter can be added into this struct.
Signed-off-by: default avatarYufeng Mo <moyufeng@huawei.com>
Signed-off-by: default avatarHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
parent 95d1d249
......@@ -947,12 +947,25 @@ Kernel response contents:
``ETHTOOL_A_COALESCE_TX_USECS_HIGH`` u32 delay (us), high Tx
``ETHTOOL_A_COALESCE_TX_MAX_FRAMES_HIGH`` u32 max packets, high Tx
``ETHTOOL_A_COALESCE_RATE_SAMPLE_INTERVAL`` u32 rate sampling interval
``ETHTOOL_A_COALESCE_USE_CQE_TX`` bool timer reset mode, Tx
``ETHTOOL_A_COALESCE_USE_CQE_RX`` bool timer reset mode, Rx
=========================================== ====== =======================
Attributes are only included in reply if their value is not zero or the
corresponding bit in ``ethtool_ops::supported_coalesce_params`` is set (i.e.
they are declared as supported by driver).
Timer reset mode (``ETHTOOL_A_COALESCE_USE_CQE_TX`` and
``ETHTOOL_A_COALESCE_USE_CQE_RX``) controls the interaction between packet
arrival and the various time based delay parameters. By default timers are
expected to limit the max delay between any packet arrival/departure and a
corresponding interrupt. In this mode timer should be started by packet
arrival (sometimes delivery of previous interrupt) and reset when interrupt
is delivered.
Setting the appropriate attribute to 1 will enable ``CQE`` mode, where
each packet event resets the timer. In this mode timer is used to force
the interrupt if queue goes idle, while busy queues depend on the packet
limit to trigger interrupts.
COALESCE_SET
============
......@@ -985,6 +998,8 @@ Request contents:
``ETHTOOL_A_COALESCE_TX_USECS_HIGH`` u32 delay (us), high Tx
``ETHTOOL_A_COALESCE_TX_MAX_FRAMES_HIGH`` u32 max packets, high Tx
``ETHTOOL_A_COALESCE_RATE_SAMPLE_INTERVAL`` u32 rate sampling interval
``ETHTOOL_A_COALESCE_USE_CQE_TX`` bool timer reset mode, Tx
``ETHTOOL_A_COALESCE_USE_CQE_RX`` bool timer reset mode, Rx
=========================================== ====== =======================
Request is rejected if it attributes declared as unsupported by driver (i.e.
......
......@@ -172,6 +172,11 @@ extern int
__ethtool_get_link_ksettings(struct net_device *dev,
struct ethtool_link_ksettings *link_ksettings);
struct kernel_ethtool_coalesce {
u8 use_cqe_mode_tx;
u8 use_cqe_mode_rx;
};
/**
* ethtool_intersect_link_masks - Given two link masks, AND them together
* @dst: first mask and where result is stored
......@@ -211,7 +216,9 @@ bool ethtool_convert_link_mode_to_legacy_u32(u32 *legacy_u32,
#define ETHTOOL_COALESCE_TX_USECS_HIGH BIT(19)
#define ETHTOOL_COALESCE_TX_MAX_FRAMES_HIGH BIT(20)
#define ETHTOOL_COALESCE_RATE_SAMPLE_INTERVAL BIT(21)
#define ETHTOOL_COALESCE_ALL_PARAMS GENMASK(21, 0)
#define ETHTOOL_COALESCE_USE_CQE_RX BIT(22)
#define ETHTOOL_COALESCE_USE_CQE_TX BIT(23)
#define ETHTOOL_COALESCE_ALL_PARAMS GENMASK(23, 0)
#define ETHTOOL_COALESCE_USECS \
(ETHTOOL_COALESCE_RX_USECS | ETHTOOL_COALESCE_TX_USECS)
......@@ -237,6 +244,8 @@ bool ethtool_convert_link_mode_to_legacy_u32(u32 *legacy_u32,
ETHTOOL_COALESCE_RX_USECS_LOW | ETHTOOL_COALESCE_RX_USECS_HIGH | \
ETHTOOL_COALESCE_PKT_RATE_LOW | ETHTOOL_COALESCE_PKT_RATE_HIGH | \
ETHTOOL_COALESCE_RATE_SAMPLE_INTERVAL)
#define ETHTOOL_COALESCE_USE_CQE \
(ETHTOOL_COALESCE_USE_CQE_RX | ETHTOOL_COALESCE_USE_CQE_TX)
#define ETHTOOL_STAT_NOT_SET (~0ULL)
......
......@@ -377,6 +377,8 @@ enum {
ETHTOOL_A_COALESCE_TX_USECS_HIGH, /* u32 */
ETHTOOL_A_COALESCE_TX_MAX_FRAMES_HIGH, /* u32 */
ETHTOOL_A_COALESCE_RATE_SAMPLE_INTERVAL, /* u32 */
ETHTOOL_A_COALESCE_USE_CQE_MODE_TX, /* u8 */
ETHTOOL_A_COALESCE_USE_CQE_MODE_RX, /* u8 */
/* add new constants above here */
__ETHTOOL_A_COALESCE_CNT,
......
......@@ -10,6 +10,7 @@ struct coalesce_req_info {
struct coalesce_reply_data {
struct ethnl_reply_data base;
struct ethtool_coalesce coalesce;
struct kernel_ethtool_coalesce kernel_coalesce;
u32 supported_params;
};
......@@ -100,7 +101,9 @@ static int coalesce_reply_size(const struct ethnl_req_info *req_base,
nla_total_size(sizeof(u32)) + /* _RX_MAX_FRAMES_HIGH */
nla_total_size(sizeof(u32)) + /* _TX_USECS_HIGH */
nla_total_size(sizeof(u32)) + /* _TX_MAX_FRAMES_HIGH */
nla_total_size(sizeof(u32)); /* _RATE_SAMPLE_INTERVAL */
nla_total_size(sizeof(u32)) + /* _RATE_SAMPLE_INTERVAL */
nla_total_size(sizeof(u8)) + /* _USE_CQE_MODE_TX */
nla_total_size(sizeof(u8)); /* _USE_CQE_MODE_RX */
}
static bool coalesce_put_u32(struct sk_buff *skb, u16 attr_type, u32 val,
......@@ -124,6 +127,7 @@ static int coalesce_fill_reply(struct sk_buff *skb,
const struct ethnl_reply_data *reply_base)
{
const struct coalesce_reply_data *data = COALESCE_REPDATA(reply_base);
const struct kernel_ethtool_coalesce *kcoal = &data->kernel_coalesce;
const struct ethtool_coalesce *coal = &data->coalesce;
u32 supported = data->supported_params;
......@@ -170,7 +174,11 @@ static int coalesce_fill_reply(struct sk_buff *skb,
coalesce_put_u32(skb, ETHTOOL_A_COALESCE_TX_MAX_FRAMES_HIGH,
coal->tx_max_coalesced_frames_high, supported) ||
coalesce_put_u32(skb, ETHTOOL_A_COALESCE_RATE_SAMPLE_INTERVAL,
coal->rate_sample_interval, supported))
coal->rate_sample_interval, supported) ||
coalesce_put_bool(skb, ETHTOOL_A_COALESCE_USE_CQE_MODE_TX,
kcoal->use_cqe_mode_tx, supported) ||
coalesce_put_bool(skb, ETHTOOL_A_COALESCE_USE_CQE_MODE_RX,
kcoal->use_cqe_mode_rx, supported))
return -EMSGSIZE;
return 0;
......@@ -215,10 +223,13 @@ const struct nla_policy ethnl_coalesce_set_policy[] = {
[ETHTOOL_A_COALESCE_TX_USECS_HIGH] = { .type = NLA_U32 },
[ETHTOOL_A_COALESCE_TX_MAX_FRAMES_HIGH] = { .type = NLA_U32 },
[ETHTOOL_A_COALESCE_RATE_SAMPLE_INTERVAL] = { .type = NLA_U32 },
[ETHTOOL_A_COALESCE_USE_CQE_MODE_TX] = NLA_POLICY_MAX(NLA_U8, 1),
[ETHTOOL_A_COALESCE_USE_CQE_MODE_RX] = NLA_POLICY_MAX(NLA_U8, 1),
};
int ethnl_set_coalesce(struct sk_buff *skb, struct genl_info *info)
{
struct kernel_ethtool_coalesce kernel_coalesce = {};
struct ethtool_coalesce coalesce = {};
struct ethnl_req_info req_info = {};
struct nlattr **tb = info->attrs;
......@@ -303,6 +314,10 @@ int ethnl_set_coalesce(struct sk_buff *skb, struct genl_info *info)
tb[ETHTOOL_A_COALESCE_TX_MAX_FRAMES_HIGH], &mod);
ethnl_update_u32(&coalesce.rate_sample_interval,
tb[ETHTOOL_A_COALESCE_RATE_SAMPLE_INTERVAL], &mod);
ethnl_update_u8(&kernel_coalesce.use_cqe_mode_tx,
tb[ETHTOOL_A_COALESCE_USE_CQE_MODE_TX], &mod);
ethnl_update_u8(&kernel_coalesce.use_cqe_mode_rx,
tb[ETHTOOL_A_COALESCE_USE_CQE_MODE_RX], &mod);
ret = 0;
if (!mod)
goto out_ops;
......
......@@ -359,7 +359,7 @@ extern const struct nla_policy ethnl_rings_set_policy[ETHTOOL_A_RINGS_TX + 1];
extern const struct nla_policy ethnl_channels_get_policy[ETHTOOL_A_CHANNELS_HEADER + 1];
extern const struct nla_policy ethnl_channels_set_policy[ETHTOOL_A_CHANNELS_COMBINED_COUNT + 1];
extern const struct nla_policy ethnl_coalesce_get_policy[ETHTOOL_A_COALESCE_HEADER + 1];
extern const struct nla_policy ethnl_coalesce_set_policy[ETHTOOL_A_COALESCE_RATE_SAMPLE_INTERVAL + 1];
extern const struct nla_policy ethnl_coalesce_set_policy[ETHTOOL_A_COALESCE_MAX + 1];
extern const struct nla_policy ethnl_pause_get_policy[ETHTOOL_A_PAUSE_HEADER + 1];
extern const struct nla_policy ethnl_pause_set_policy[ETHTOOL_A_PAUSE_TX + 1];
extern const struct nla_policy ethnl_eee_get_policy[ETHTOOL_A_EEE_HEADER + 1];
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment