x86/asm/entry/64: Migrate error and IRQ exit work to C and remove old assembly code

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: paulmck@linux.vnet.ibm.com
Link: http://lkml.kernel.org/r/60e90901eee611e59e958bfdbbe39969b4f88fe5.1435952415.git.luto@kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

arch/x86/entry/entry_64.S

@@ -508,7 +508,16 @@ END(irq_entries_start)
 
 	testb	$3, CS(%rsp)
 	jz	1f
+
+	/*
+	 * IRQ from user mode.  Switch to kernel gsbase and inform context
+	 * tracking that we're in kernel mode.
+	 */
 	SWAPGS
+#ifdef CONFIG_CONTEXT_TRACKING
+	call enter_from_user_mode
+#endif
+
 1:
 	/*
 	 * Save previous stack pointer, optionally switch to interrupt stack.
@@ -547,26 +556,13 @@ ret_from_intr:
 
 	testb	$3, CS(%rsp)
 	jz	retint_kernel
-	/* Interrupt came from user space */
-GLOBAL(retint_user)
-	GET_THREAD_INFO(%rcx)
 
-	/* %rcx: thread info. Interrupts are off. */
-retint_with_reschedule:
-	movl	$_TIF_WORK_MASK, %edi
-retint_check:
+	/* Interrupt came from user space */
 	LOCKDEP_SYS_EXIT_IRQ
-	movl	TI_flags(%rcx), %edx
-	andl	%edi, %edx
-	jnz	retint_careful
-
-retint_swapgs:					/* return to user-space */
-	/*
-	 * The iretq could re-enable interrupts:
-	 */
-	DISABLE_INTERRUPTS(CLBR_ANY)
+GLOBAL(retint_user)
+	mov	%rsp,%rdi
+	call	prepare_exit_to_usermode
 	TRACE_IRQS_IRETQ
-
 	SWAPGS
 	jmp	restore_regs_and_iret
 
@@ -644,35 +640,6 @@ native_irq_return_ldt:
 	popq	%rax
 	jmp	native_irq_return_iret
 #endif
-
-	/* edi: workmask, edx: work */
-retint_careful:
-	bt	$TIF_NEED_RESCHED, %edx
-	jnc	retint_signal
-	TRACE_IRQS_ON
-	ENABLE_INTERRUPTS(CLBR_NONE)
-	pushq	%rdi
-	SCHEDULE_USER
-	popq	%rdi
-	GET_THREAD_INFO(%rcx)
-	DISABLE_INTERRUPTS(CLBR_NONE)
-	TRACE_IRQS_OFF
-	jmp	retint_check
-
-retint_signal:
-	testl	$_TIF_DO_NOTIFY_MASK, %edx
-	jz	retint_swapgs
-	TRACE_IRQS_ON
-	ENABLE_INTERRUPTS(CLBR_NONE)
-	movq	$-1, ORIG_RAX(%rsp)
-	xorl	%esi, %esi			/* oldset */
-	movq	%rsp, %rdi			/* &pt_regs */
-	call	do_notify_resume
-	DISABLE_INTERRUPTS(CLBR_NONE)
-	TRACE_IRQS_OFF
-	GET_THREAD_INFO(%rcx)
-	jmp	retint_with_reschedule
-
 END(common_interrupt)
 
 /*
@@ -1088,7 +1055,12 @@ ENTRY(error_entry)
 	SWAPGS
 
 .Lerror_entry_from_usermode_after_swapgs:
+#ifdef CONFIG_CONTEXT_TRACKING
+	call enter_from_user_mode
+#endif
+
 .Lerror_entry_done:
+
 	TRACE_IRQS_OFF
 	ret
 

arch/x86/entry/entry_64_compat.S

@@ -458,6 +458,11 @@ ia32_badarg:
 	DISABLE_INTERRUPTS(CLBR_NONE)
 	TRACE_IRQS_OFF
 
+	/* Now finish entering normal kernel mode. */
+#ifdef CONFIG_CONTEXT_TRACKING
+	call enter_from_user_mode
+#endif
+
 	/* And exit again. */
 	jmp retint_user