MIPS: Alchemy: switch to use software nodes for GPIOs

Switch to use software nodes/properties to describe GPIOs for the
ADS7846 touchscreen and the SPI controller (away from using GPIO lookup
tables). This allows removing use of ADS7846 platform data, which will
be going away.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

arch/mips/alchemy/devboards/db1000.c

@@ -10,15 +10,16 @@
 #include <linux/dma-mapping.h>
 #include <linux/gpio.h>
 #include <linux/gpio/machine.h>
+#include <linux/gpio/property.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/leds.h>
 #include <linux/mmc/host.h>
 #include <linux/platform_device.h>
+#include <linux/property.h>
 #include <linux/pm.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/spi_gpio.h>
-#include <linux/spi/ads7846.h>
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-au1x00/gpio-au1000.h>
 #include <asm/mach-au1x00/au1000_dma.h>
@@ -374,22 +375,20 @@ static struct platform_device db1100_mmc1_dev = {
 
 /******************************************************************************/
 
-static struct ads7846_platform_data db1100_touch_pd = {
-	.model		= 7846,
-	.vref_mv	= 3300,
+static const struct software_node db1100_alchemy2_gpiochip = {
+	.name	= "alchemy-gpio2",
 };
 
-static struct spi_gpio_platform_data db1100_spictl_pd = {
-	.num_chipselect = 1,
+static const struct property_entry db1100_ads7846_properties[] = {
+	PROPERTY_ENTRY_U16("ti,vref_min", 3300),
+	PROPERTY_ENTRY_GPIO("pendown-gpios",
+			    &db1100_alchemy2_gpiochip, 21, GPIO_ACTIVE_LOW),
+	{ }
 };
 
-static struct gpiod_lookup_table db1100_touch_gpio_table = {
-	.dev_id = "spi0.0",
-	.table = {
-		GPIO_LOOKUP("alchemy-gpio2", 21,
-			    "pendown", GPIO_ACTIVE_LOW),
-		{ }
-	},
+static const struct software_node db1100_ads7846_swnode = {
+	.name		= "ads7846",
+	.properties	= db1100_ads7846_properties,
 };
 
 static struct spi_board_info db1100_spi_info[] __initdata = {
@@ -400,37 +399,37 @@ static struct spi_board_info db1100_spi_info[] __initdata = {
 		.chip_select	 = 0,
 		.mode		 = 0,
 		.irq		 = AU1100_GPIO21_INT,
-		.platform_data	 = &db1100_touch_pd,
+		.swnode		 = &db1100_ads7846_swnode,
 	},
 };
 
-static struct platform_device db1100_spi_dev = {
-	.name		= "spi_gpio",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &db1100_spictl_pd,
-		.dma_mask		= &au1xxx_all_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
+static const struct spi_gpio_platform_data db1100_spictl_pd __initconst = {
+	.num_chipselect = 1,
 };
 
 /*
  * Alchemy GPIO 2 has its base at 200 so the GPIO lines
  * 207 thru 210 are GPIOs at offset 7 thru 10 at this chip.
  */
-static struct gpiod_lookup_table db1100_spi_gpiod_table = {
-	.dev_id         = "spi_gpio",
-	.table          = {
-		GPIO_LOOKUP("alchemy-gpio2", 9,
-			    "sck", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("alchemy-gpio2", 8,
-			    "mosi", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("alchemy-gpio2", 7,
-			    "miso", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("alchemy-gpio2", 10,
-			    "cs", GPIO_ACTIVE_HIGH),
-		{ },
-	},
+static const struct property_entry db1100_spi_dev_properties[] __initconst = {
+	PROPERTY_ENTRY_GPIO("miso-gpios",
+			    &db1100_alchemy2_gpiochip, 7, GPIO_ACTIVE_HIGH),
+	PROPERTY_ENTRY_GPIO("mosi-gpios",
+			    &db1100_alchemy2_gpiochip, 8, GPIO_ACTIVE_HIGH),
+	PROPERTY_ENTRY_GPIO("sck-gpios",
+			    &db1100_alchemy2_gpiochip, 9, GPIO_ACTIVE_HIGH),
+	PROPERTY_ENTRY_GPIO("cs-gpios",
+			    &db1100_alchemy2_gpiochip, 10, GPIO_ACTIVE_HIGH),
+	{ }
+};
+
+static const struct platform_device_info db1100_spi_dev_info __initconst = {
+	.name		= "spi_gpio",
+	.id		= 0,
+	.data		= &db1100_spictl_pd,
+	.size_data	= sizeof(db1100_spictl_pd),
+        .dma_mask	= DMA_BIT_MASK(32),
+	.properties	= db1100_spi_dev_properties,
 };
 
 static struct platform_device *db1x00_devs[] = {
@@ -452,8 +451,10 @@ int __init db1000_dev_setup(void)
 {
 	int board = BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI));
 	int c0, c1, d0, d1, s0, s1, flashsize = 32,  twosocks = 1;
+	int err;
 	unsigned long pfc;
 	struct clk *c, *p;
+	struct platform_device *spi_dev;
 
 	if (board == BCSR_WHOAMI_DB1500) {
 		c0 = AU1500_GPIO2_INT;
@@ -480,7 +481,7 @@ int __init db1000_dev_setup(void)
 		pfc |= (1 << 0);	/* SSI0 pins as GPIOs */
 		alchemy_wrsys(pfc, AU1000_SYS_PINFUNC);
 
-		gpiod_add_lookup_table(&db1100_touch_gpio_table);
+		software_node_register(&db1100_alchemy2_gpiochip);
 		spi_register_board_info(db1100_spi_info,
 					ARRAY_SIZE(db1100_spi_info));
 
@@ -497,8 +498,11 @@ int __init db1000_dev_setup(void)
 			clk_put(p);
 
 		platform_add_devices(db1100_devs, ARRAY_SIZE(db1100_devs));
-		gpiod_add_lookup_table(&db1100_spi_gpiod_table);
-		platform_device_register(&db1100_spi_dev);
+
+		spi_dev = platform_device_register_full(&db1100_spi_dev_info);
+		err = PTR_ERR_OR_ZERO(spi_dev);
+		if (err)
+			pr_err("failed to register SPI controller: %d\n", err);
 	} else if (board == BCSR_WHOAMI_DB1000) {
 		c0 = AU1000_GPIO2_INT;
 		c1 = AU1000_GPIO5_INT;