Commit 02f77ef1 authored by Peter Ujfalusi's avatar Peter Ujfalusi Committed by Vinod Koul

dmaengine: edma: Refactor the dma device and channel struct initialization

Move all code under one function to do the dma device and eDMA channel
related setup so they are not scattered around the driver.
Signed-off-by: default avatarPeter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: default avatarVinod Koul <vinod.koul@intel.com>
parent 633e42b8
......@@ -1756,18 +1756,49 @@ static enum dma_status edma_tx_status(struct dma_chan *chan,
return ret;
}
static void __init edma_chan_init(struct edma_cc *ecc, struct dma_device *dma,
struct edma_chan *echans)
#define EDMA_DMA_BUSWIDTHS (BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) | \
BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) | \
BIT(DMA_SLAVE_BUSWIDTH_3_BYTES) | \
BIT(DMA_SLAVE_BUSWIDTH_4_BYTES))
static void edma_dma_init(struct edma_cc *ecc)
{
struct dma_device *ddev = &ecc->dma_slave;
int i, j;
dma_cap_zero(ddev->cap_mask);
dma_cap_set(DMA_SLAVE, ddev->cap_mask);
dma_cap_set(DMA_CYCLIC, ddev->cap_mask);
dma_cap_set(DMA_MEMCPY, ddev->cap_mask);
ddev->device_prep_slave_sg = edma_prep_slave_sg;
ddev->device_prep_dma_cyclic = edma_prep_dma_cyclic;
ddev->device_prep_dma_memcpy = edma_prep_dma_memcpy;
ddev->device_alloc_chan_resources = edma_alloc_chan_resources;
ddev->device_free_chan_resources = edma_free_chan_resources;
ddev->device_issue_pending = edma_issue_pending;
ddev->device_tx_status = edma_tx_status;
ddev->device_config = edma_slave_config;
ddev->device_pause = edma_dma_pause;
ddev->device_resume = edma_dma_resume;
ddev->device_terminate_all = edma_terminate_all;
ddev->src_addr_widths = EDMA_DMA_BUSWIDTHS;
ddev->dst_addr_widths = EDMA_DMA_BUSWIDTHS;
ddev->directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
ddev->residue_granularity = DMA_RESIDUE_GRANULARITY_BURST;
ddev->dev = ecc->dev;
INIT_LIST_HEAD(&ddev->channels);
for (i = 0; i < ecc->num_channels; i++) {
struct edma_chan *echan = &echans[i];
struct edma_chan *echan = &ecc->slave_chans[i];
echan->ch_num = EDMA_CTLR_CHAN(ecc->id, i);
echan->ecc = ecc;
echan->vchan.desc_free = edma_desc_free;
vchan_init(&echan->vchan, dma);
vchan_init(&echan->vchan, ddev);
INIT_LIST_HEAD(&echan->node);
for (j = 0; j < EDMA_MAX_SLOTS; j++)
......@@ -1775,36 +1806,6 @@ static void __init edma_chan_init(struct edma_cc *ecc, struct dma_device *dma,
}
}
#define EDMA_DMA_BUSWIDTHS (BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) | \
BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) | \
BIT(DMA_SLAVE_BUSWIDTH_3_BYTES) | \
BIT(DMA_SLAVE_BUSWIDTH_4_BYTES))
static void edma_dma_init(struct edma_cc *ecc, struct dma_device *dma,
struct device *dev)
{
dma->device_prep_slave_sg = edma_prep_slave_sg;
dma->device_prep_dma_cyclic = edma_prep_dma_cyclic;
dma->device_prep_dma_memcpy = edma_prep_dma_memcpy;
dma->device_alloc_chan_resources = edma_alloc_chan_resources;
dma->device_free_chan_resources = edma_free_chan_resources;
dma->device_issue_pending = edma_issue_pending;
dma->device_tx_status = edma_tx_status;
dma->device_config = edma_slave_config;
dma->device_pause = edma_dma_pause;
dma->device_resume = edma_dma_resume;
dma->device_terminate_all = edma_terminate_all;
dma->src_addr_widths = EDMA_DMA_BUSWIDTHS;
dma->dst_addr_widths = EDMA_DMA_BUSWIDTHS;
dma->directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
dma->residue_granularity = DMA_RESIDUE_GRANULARITY_BURST;
dma->dev = dev;
INIT_LIST_HEAD(&dma->channels);
}
static int edma_setup_from_hw(struct device *dev, struct edma_soc_info *pdata,
struct edma_cc *ecc)
{
......@@ -2137,14 +2138,8 @@ static int edma_probe(struct platform_device *pdev)
}
ecc->info = info;
dma_cap_zero(ecc->dma_slave.cap_mask);
dma_cap_set(DMA_SLAVE, ecc->dma_slave.cap_mask);
dma_cap_set(DMA_CYCLIC, ecc->dma_slave.cap_mask);
dma_cap_set(DMA_MEMCPY, ecc->dma_slave.cap_mask);
edma_dma_init(ecc, &ecc->dma_slave, dev);
edma_chan_init(ecc, &ecc->dma_slave, ecc->slave_chans);
/* Init the dma device and channels */
edma_dma_init(ecc);
for (i = 0; i < ecc->num_channels; i++) {
/* Assign all channels to the default queue */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment