brcmsmac: rework switch control table init including iPA BT-combo

Rework the code path in lcnphy tbl_init() for switch control
table programming. This also takes the iPA BT-combo card into
account.
Tested-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c

@@ -4573,6 +4573,7 @@ static void wlc_lcnphy_tbl_init(struct brcms_phy *pi)
 	uint idx;
 	u8 phybw40;
 	struct phytbl_info tab;
+	const struct phytbl_info *tb;
 	u32 val;
 
 	phybw40 = CHSPEC_IS40(pi->radio_chanspec);
@@ -4619,7 +4620,6 @@ static void wlc_lcnphy_tbl_init(struct brcms_phy *pi)
 	}
 
 	if (LCNREV_IS(pi->pubpi.phy_rev, 2)) {
-		const struct phytbl_info *tb;
 		int l;
 
 		if (CHSPEC_IS2G(pi->radio_chanspec)) {
@@ -4640,21 +4640,22 @@ static void wlc_lcnphy_tbl_init(struct brcms_phy *pi)
 			wlc_lcnphy_write_table(pi, &tb[idx]);
 	}
 
-	if ((pi->sh->boardflags & BFL_FEM)
-	    && !(pi->sh->boardflags & BFL_FEM_BT))
-		wlc_lcnphy_write_table(pi, &dot11lcn_sw_ctrl_tbl_info_4313_epa);
-	else if (pi->sh->boardflags & BFL_FEM_BT) {
-		if (pi->sh->boardrev < 0x1250)
-			wlc_lcnphy_write_table(
-				pi,
-				&dot11lcn_sw_ctrl_tbl_info_4313_bt_epa);
+	if (pi->sh->boardflags & BFL_FEM) {
+		if (pi->sh->boardflags & BFL_FEM_BT) {
+			if (pi->sh->boardrev < 0x1250)
+				tb = &dot11lcn_sw_ctrl_tbl_info_4313_bt_epa;
+			else
+				tb = &dot11lcn_sw_ctrl_tbl_info_4313_bt_epa_p250;
+		} else {
+			tb = &dot11lcn_sw_ctrl_tbl_info_4313_epa;
+		}
+	} else {
+		if (pi->sh->boardflags & BFL_FEM_BT)
+			tb = &dot11lcn_sw_ctrl_tbl_info_4313_bt_ipa;
 		else
-			wlc_lcnphy_write_table(
-				pi,
-				&dot11lcn_sw_ctrl_tbl_info_4313_bt_epa_p250);
-	} else
-		wlc_lcnphy_write_table(pi, &dot11lcn_sw_ctrl_tbl_info_4313);
-
+			tb = &dot11lcn_sw_ctrl_tbl_info_4313;
+	}
+	wlc_lcnphy_write_table(pi, tb);
 	wlc_lcnphy_load_rfpower(pi);
 
 	wlc_lcnphy_clear_papd_comptable(pi);

drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_lcn.c

@@ -2044,6 +2044,73 @@ static const u16 dot11lcn_sw_ctrl_tbl_4313_rev0[] = {
 	0x0005,
 };
 
+static const u16 dot11lcn_sw_ctrl_tbl_4313_ipa_rev0_combo[] = {
+	0x0005,
+	0x0006,
+	0x0009,
+	0x000a,
+	0x0005,
+	0x0006,
+	0x0009,
+	0x000a,
+	0x0005,
+	0x0006,
+	0x0009,
+	0x000a,
+	0x0005,
+	0x0006,
+	0x0009,
+	0x000a,
+	0x0005,
+	0x0006,
+	0x0009,
+	0x000a,
+	0x0005,
+	0x0006,
+	0x0009,
+	0x000a,
+	0x0005,
+	0x0006,
+	0x0009,
+	0x000a,
+	0x0005,
+	0x0006,
+	0x0009,
+	0x000a,
+	0x0005,
+	0x0006,
+	0x0009,
+	0x000a,
+	0x0005,
+	0x0006,
+	0x0009,
+	0x000a,
+	0x0005,
+	0x0006,
+	0x0009,
+	0x000a,
+	0x0005,
+	0x0006,
+	0x0009,
+	0x000a,
+	0x0005,
+	0x0006,
+	0x0009,
+	0x000a,
+	0x0005,
+	0x0006,
+	0x0009,
+	0x000a,
+	0x0005,
+	0x0006,
+	0x0009,
+	0x000a,
+	0x0005,
+	0x0006,
+	0x0009,
+	0x000a,
+};
+
 static const u16 dot11lcn_sw_ctrl_tbl_rev0[] = {
 	0x0004,
 	0x0004,
@@ -2808,6 +2875,11 @@ const struct phytbl_info dot11lcn_sw_ctrl_tbl_info_4313 = {
 	ARRAY_SIZE(dot11lcn_sw_ctrl_tbl_4313_rev0), 15, 0, 16
 };
 
+const struct phytbl_info dot11lcn_sw_ctrl_tbl_info_4313_bt_ipa = {
+	&dot11lcn_sw_ctrl_tbl_4313_ipa_rev0_combo,
+	ARRAY_SIZE(dot11lcn_sw_ctrl_tbl_4313_ipa_rev0_combo), 15, 0, 16
+};
+
 const struct phytbl_info dot11lcn_sw_ctrl_tbl_info_4313_epa = {
 	&dot11lcn_sw_ctrl_tbl_4313_epa_rev0,
 	ARRAY_SIZE(dot11lcn_sw_ctrl_tbl_4313_epa_rev0), 15, 0, 16

drivers/net/wireless/brcm80211/brcmsmac/phy/phytbl_lcn.h

@@ -20,6 +20,7 @@
 extern const struct phytbl_info dot11lcnphytbl_rx_gain_info_rev0[];
 extern const u32 dot11lcnphytbl_rx_gain_info_sz_rev0;
 extern const struct phytbl_info dot11lcn_sw_ctrl_tbl_info_4313;
+extern const struct phytbl_info dot11lcn_sw_ctrl_tbl_info_4313_bt_ipa;
 extern const struct phytbl_info dot11lcn_sw_ctrl_tbl_info_4313_epa;
 extern const struct phytbl_info dot11lcn_sw_ctrl_tbl_info_4313_epa_combo;
 extern const struct phytbl_info dot11lcn_sw_ctrl_tbl_info_4313_bt_epa;