powerpc: Merge rtas.c into arch/powerpc/kernel

This splits arch/ppc64/kernel/rtas.c into arch/powerpc/kernel/rtas.c,
which contains generic RTAS functions useful on any CHRP platform,
and arch/powerpc/platforms/pseries/rtas-fw.[ch], which contain
some pSeries-specific firmware flashing bits.  The parts of rtas.c
that are to do with pSeries-specific error logging are protected
by a new CONFIG_RTAS_ERROR_LOGGING symbol.  The inclusion of rtas.o
is controlled by the CONFIG_PPC_RTAS symbol, and the relevant
platforms select that.
Signed-off-by: Paul Mackerras <paulus@samba.org>

arch/powerpc/Kconfig

@@ -276,6 +276,8 @@ config PPC_PSERIES
 	depends on PPC_MULTIPLATFORM && PPC64
 	bool "  IBM pSeries & new (POWER5-based) iSeries"
 	select PPC_I8259
+	select PPC_RTAS
+	select RTAS_ERROR_LOGGING
 	default y
 
 config PPC_CHRP
@@ -283,6 +285,7 @@ config PPC_CHRP
 	depends on PPC_MULTIPLATFORM && PPC32
 	select PPC_I8259
 	select PPC_INDIRECT_PCI
+	select PPC_RTAS
 	default y
 
 config PPC_PMAC
@@ -317,6 +320,7 @@ config PPC_MAPLE
 config PPC_BPA
 	bool "  Broadband Processor Architecture"
 	depends on PPC_MULTIPLATFORM && PPC64
+	select PPC_RTAS
 
 config PPC_OF
 	bool
@@ -338,6 +342,15 @@ config MPIC
 	bool
 	default y
 
+config PPC_RTAS
+	bool
+	default n
+
+config RTAS_ERROR_LOGGING
+	bool
+	depends on PPC_RTAS
+	default n
+
 config MPIC_BROKEN_U3
 	bool
 	depends on PPC_MAPLE

arch/powerpc/kernel/Makefile

@@ -16,6 +16,7 @@ obj-$(CONFIG_PPC64)		+= binfmt_elf32.o sys_ppc32.o ptrace32.o
 obj-$(CONFIG_ALTIVEC)		+= vecemu.o vector.o
 obj-$(CONFIG_POWER4)		+= idle_power4.o
 obj-$(CONFIG_PPC_OF)		+= of_device.o
+obj-$(CONFIG_PPC_RTAS)		+= rtas.o
 obj-$(CONFIG_IBMVIO)		+= vio.o
 
 ifeq ($(CONFIG_PPC_MERGE),y)

arch/powerpc/kernel/asm-offsets.c

@@ -36,11 +36,11 @@
 #include <asm/processor.h>
 #include <asm/cputable.h>
 #include <asm/thread_info.h>
+#include <asm/rtas.h>
 #ifdef CONFIG_PPC64
 #include <asm/paca.h>
 #include <asm/lppaca.h>
 #include <asm/iSeries/HvLpEvent.h>
-#include <asm/rtas.h>
 #include <asm/cache.h>
 #include <asm/systemcfg.h>
 #include <asm/compat.h>
@@ -97,7 +97,7 @@ int main(void)
 	DEFINE(TI_TASK, offsetof(struct thread_info, task));
 	DEFINE(TI_EXECDOMAIN, offsetof(struct thread_info, exec_domain));
 	DEFINE(TI_CPU, offsetof(struct thread_info, cpu));
-#endif /* CONFIG_PPC64 */
+#endif /* CONFIG_PPC32 */
 
 #ifdef CONFIG_PPC64
 	DEFINE(DCACHEL1LINESIZE, offsetof(struct ppc64_caches, dline_size));
@@ -142,11 +142,11 @@ int main(void)
 	DEFINE(LPPACASRR1, offsetof(struct lppaca, saved_srr1));
 	DEFINE(LPPACAANYINT, offsetof(struct lppaca, int_dword.any_int));
 	DEFINE(LPPACADECRINT, offsetof(struct lppaca, int_dword.fields.decr_int));
+#endif /* CONFIG_PPC64 */
 
 	/* RTAS */
 	DEFINE(RTASBASE, offsetof(struct rtas_t, base));
 	DEFINE(RTASENTRY, offsetof(struct rtas_t, entry));
-#endif /* CONFIG_PPC64 */
 
 	/* Interrupt register frame */
 	DEFINE(STACK_FRAME_OVERHEAD, STACK_FRAME_OVERHEAD);

arch/powerpc/kernel/entry_32.S

@@ -954,7 +954,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_601)
  * here so it's easy to add arch-specific sections later.
  * -- Cort
  */
-#ifdef CONFIG_PPC_OF
+#ifdef CONFIG_PPC_RTAS
 /*
  * On CHRP, the Run-Time Abstraction Services (RTAS) have to be
  * called with the MMU off.
@@ -963,14 +963,13 @@ _GLOBAL(enter_rtas)
 	stwu	r1,-INT_FRAME_SIZE(r1)
 	mflr	r0
 	stw	r0,INT_FRAME_SIZE+4(r1)
-	lis	r4,rtas_data@ha
-	lwz	r4,rtas_data@l(r4)
+	LOADADDR(r4, rtas)
 	lis	r6,1f@ha	/* physical return address for rtas */
 	addi	r6,r6,1f@l
 	tophys(r6,r6)
 	tophys(r7,r1)
-	lis	r8,rtas_entry@ha
-	lwz	r8,rtas_entry@l(r8)
+	lwz	r8,RTASENTRY(r4)
+	lwz	r4,RTASBASE(r4)
 	mfmsr	r9
 	stw	r9,8(r1)
 	LOAD_MSR_KERNEL(r0,MSR_KERNEL)
@@ -978,7 +977,6 @@ _GLOBAL(enter_rtas)
 	MTMSRD(r0)		/* don't get trashed */
 	li	r9,MSR_KERNEL & ~(MSR_IR|MSR_DR)
 	mtlr	r6
-	CLR_TOP32(r7)
 	mtspr	SPRN_SPRG2,r7
 	mtspr	SPRN_SRR0,r8
 	mtspr	SPRN_SRR1,r9
@@ -999,4 +997,4 @@ machine_check_in_rtas:
 	twi	31,0,0
 	/* XXX load up BATs and panic */
 
-#endif /* CONFIG_PPC_OF */
+#endif /* CONFIG_PPC_RTAS */

arch/powerpc/kernel/prom.c

@@ -110,9 +110,6 @@ struct device_node *of_chosen;
 struct device_node *dflt_interrupt_controller;
 int num_interrupt_controllers;
 
-u32 rtas_data;
-u32 rtas_entry;
-
 /*
  * Wrapper for allocating memory for various data that needs to be
  * attached to device nodes as they are processed at boot or when

arch/powerpc/platforms/pseries/Kconfig

@@ -21,11 +21,6 @@ config EEH
 	depends on PPC_PSERIES
 	default y if !EMBEDDED
 
-config PPC_RTAS
-	bool
-	depends on PPC_PSERIES || PPC_BPA
-	default y
-
 config RTAS_PROC
 	bool "Proc interface to RTAS"
 	depends on PPC_RTAS

arch/powerpc/platforms/pseries/Makefile

 obj-y			:= pci.o lpar.o hvCall.o nvram.o reconfig.o \
-			   setup.o iommu.o ras.o
+			   setup.o iommu.o rtas-fw.o ras.o
 obj-$(CONFIG_SMP)	+= smp.o
 obj-$(CONFIG_IBMVIO)	+= vio.o

arch/powerpc/platforms/pseries/rtas-fw.c

+/*
+ *
+ * Procedures for firmware flash updates on pSeries systems.
+ *
+ * Peter Bergner, IBM	March 2001.
+ * Copyright (C) 2001 IBM.
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ */
+
+#include <stdarg.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <linux/module.h>
+#include <linux/init.h>
+
+#include <asm/prom.h>
+#include <asm/rtas.h>
+#include <asm/semaphore.h>
+#include <asm/machdep.h>
+#include <asm/page.h>
+#include <asm/param.h>
+#include <asm/system.h>
+#include <asm/abs_addr.h>
+#include <asm/udbg.h>
+#include <asm/delay.h>
+#include <asm/uaccess.h>
+#include <asm/systemcfg.h>
+
+#include "rtas-fw.h"
+
+struct flash_block_list_header rtas_firmware_flash_list = {0, NULL};
+
+#define FLASH_BLOCK_LIST_VERSION (1UL)
+
+static void rtas_flash_firmware(void)
+{
+	unsigned long image_size;
+	struct flash_block_list *f, *next, *flist;
+	unsigned long rtas_block_list;
+	int i, status, update_token;
+
+	update_token = rtas_token("ibm,update-flash-64-and-reboot");
+	if (update_token == RTAS_UNKNOWN_SERVICE) {
+		printk(KERN_ALERT "FLASH: ibm,update-flash-64-and-reboot is not available -- not a service partition?\n");
+		printk(KERN_ALERT "FLASH: firmware will not be flashed\n");
+		return;
+	}
+
+	/* NOTE: the "first" block list is a global var with no data
+	 * blocks in the kernel data segment.  We do this because
+	 * we want to ensure this block_list addr is under 4GB.
+	 */
+	rtas_firmware_flash_list.num_blocks = 0;
+	flist = (struct flash_block_list *)&rtas_firmware_flash_list;
+	rtas_block_list = virt_to_abs(flist);
+	if (rtas_block_list >= 4UL*1024*1024*1024) {
+		printk(KERN_ALERT "FLASH: kernel bug...flash list header addr above 4GB\n");
+		return;
+	}
+
+	printk(KERN_ALERT "FLASH: preparing saved firmware image for flash\n");
+	/* Update the block_list in place. */
+	image_size = 0;
+	for (f = flist; f; f = next) {
+		/* Translate data addrs to absolute */
+		for (i = 0; i < f->num_blocks; i++) {
+			f->blocks[i].data = (char *)virt_to_abs(f->blocks[i].data);
+			image_size += f->blocks[i].length;
+		}
+		next = f->next;
+		/* Don't translate NULL pointer for last entry */
+		if (f->next)
+			f->next = (struct flash_block_list *)virt_to_abs(f->next);
+		else
+			f->next = NULL;
+		/* make num_blocks into the version/length field */
+		f->num_blocks = (FLASH_BLOCK_LIST_VERSION << 56) | ((f->num_blocks+1)*16);
+	}
+
+	printk(KERN_ALERT "FLASH: flash image is %ld bytes\n", image_size);
+	printk(KERN_ALERT "FLASH: performing flash and reboot\n");
+	rtas_progress("Flashing        \n", 0x0);
+	rtas_progress("Please Wait...  ", 0x0);
+	printk(KERN_ALERT "FLASH: this will take several minutes.  Do not power off!\n");
+	status = rtas_call(update_token, 1, 1, NULL, rtas_block_list);
+	switch (status) {	/* should only get "bad" status */
+	    case 0:
+		printk(KERN_ALERT "FLASH: success\n");
+		break;
+	    case -1:
+		printk(KERN_ALERT "FLASH: hardware error.  Firmware may not be not flashed\n");
+		break;
+	    case -3:
+		printk(KERN_ALERT "FLASH: image is corrupt or not correct for this platform.  Firmware not flashed\n");
+		break;
+	    case -4:
+		printk(KERN_ALERT "FLASH: flash failed when partially complete.  System may not reboot\n");
+		break;
+	    default:
+		printk(KERN_ALERT "FLASH: unknown flash return code %d\n", status);
+		break;
+	}
+}
+
+void rtas_flash_bypass_warning(void)
+{
+	printk(KERN_ALERT "FLASH: firmware flash requires a reboot\n");
+	printk(KERN_ALERT "FLASH: the firmware image will NOT be flashed\n");
+}
+
+
+void rtas_fw_restart(char *cmd)
+{
+	if (rtas_firmware_flash_list.next)
+		rtas_flash_firmware();
+	rtas_restart(cmd);
+}
+
+void rtas_fw_power_off(void)
+{
+	if (rtas_firmware_flash_list.next)
+		rtas_flash_bypass_warning();
+	rtas_power_off();
+}
+
+void rtas_fw_halt(void)
+{
+	if (rtas_firmware_flash_list.next)
+		rtas_flash_bypass_warning();
+	rtas_halt();
+}
+
+EXPORT_SYMBOL(rtas_firmware_flash_list);

arch/powerpc/platforms/pseries/rtas-fw.h

+void rtas_fw_restart(char *cmd);
+void rtas_fw_power_off(void);
+void rtas_fw_halt(void);

arch/powerpc/platforms/pseries/setup.c

 /*
- *  linux/arch/ppc/kernel/setup.c
+ *  64-bit pSeries and RS/6000 setup code.
  *
  *  Copyright (C) 1995  Linus Torvalds
  *  Adapted from 'alpha' version by Gary Thomas
@@ -67,6 +67,8 @@
 #include <asm/i8259.h>
 #include <asm/udbg.h>
 
+#include "rtas-fw.h"
+
 #ifdef DEBUG
 #define DBG(fmt...) udbg_printf(fmt)
 #else
@@ -589,9 +591,9 @@ struct machdep_calls __initdata pSeries_md = {
 	.pcibios_fixup		= pSeries_final_fixup,
 	.pci_probe_mode		= pSeries_pci_probe_mode,
 	.irq_bus_setup		= pSeries_irq_bus_setup,
-	.restart		= rtas_restart,
-	.power_off		= rtas_power_off,
-	.halt			= rtas_halt,
+	.restart		= rtas_fw_restart,
+	.power_off		= rtas_fw_power_off,
+	.halt			= rtas_fw_halt,
 	.panic			= rtas_os_term,
 	.cpu_die		= pSeries_mach_cpu_die,
 	.get_boot_time		= rtas_get_boot_time,

arch/ppc64/Kconfig

@@ -318,6 +318,11 @@ config PPC_RTAS
 	depends on PPC_PSERIES || PPC_BPA
 	default y
 
+config RTAS_ERROR_LOGGING
+	bool
+	depends on PPC_RTAS
+	default y
+
 config RTAS_PROC
 	bool "Proc interface to RTAS"
 	depends on PPC_RTAS

arch/ppc64/kernel/Makefile

@@ -43,7 +43,7 @@ obj-$(CONFIG_MODULES)		+= module.o
 ifneq ($(CONFIG_PPC_MERGE),y)
 obj-$(CONFIG_MODULES)		+= ppc_ksyms.o
 endif
-obj-$(CONFIG_PPC_RTAS)		+= rtas.o rtas_pci.o
+obj-$(CONFIG_PPC_RTAS)		+= rtas_pci.o
 obj-$(CONFIG_RTAS_PROC)		+= rtas-proc.o
 obj-$(CONFIG_SCANLOG)		+= scanlog.o
 obj-$(CONFIG_LPARCFG)		+= lparcfg.o