tty: Convert hw_stopped in tty_struct to bool

hw_stopped in tty_struct is used like bool, convert the variable type
to bool.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
Link: https://lore.kernel.org/r/20230309082035.14880-9-ilpo.jarvinen@linux.intel.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/char/pcmcia/synclink_cs.c

@@ -1060,7 +1060,7 @@ static void cts_change(MGSLPC_INFO *info, struct tty_struct *tty)
 			if (info->serial_signals & SerialSignal_CTS) {
 				if (debug_level >= DEBUG_LEVEL_ISR)
 					printk("CTS tx start...");
-				tty->hw_stopped = 0;
+				tty->hw_stopped = false;
 				tx_start(info, tty);
 				info->pending_bh |= BH_TRANSMIT;
 				return;
@@ -1069,7 +1069,7 @@ static void cts_change(MGSLPC_INFO *info, struct tty_struct *tty)
 			if (!(info->serial_signals & SerialSignal_CTS)) {
 				if (debug_level >= DEBUG_LEVEL_ISR)
 					printk("CTS tx stop...");
-				tty->hw_stopped = 1;
+				tty->hw_stopped = true;
 				tx_stop(info);
 			}
 		}
@@ -2312,7 +2312,7 @@ static void mgslpc_set_termios(struct tty_struct *tty,
 
 	/* Handle turning off CRTSCTS */
 	if (old_termios->c_cflag & CRTSCTS && !C_CRTSCTS(tty)) {
-		tty->hw_stopped = 0;
+		tty->hw_stopped = false;
 		tx_release(tty);
 	}
 }

drivers/mmc/core/sdio_uart.c

@@ -478,13 +478,13 @@ static void sdio_uart_check_modem_status(struct sdio_uart_port *port)
 			int cts = (status & UART_MSR_CTS);
 			if (tty->hw_stopped) {
 				if (cts) {
-					tty->hw_stopped = 0;
+					tty->hw_stopped = false;
 					sdio_uart_start_tx(port);
 					tty_wakeup(tty);
 				}
 			} else {
 				if (!cts) {
-					tty->hw_stopped = 1;
+					tty->hw_stopped = true;
 					sdio_uart_stop_tx(port);
 				}
 			}
@@ -633,7 +633,7 @@ static int sdio_uart_activate(struct tty_port *tport, struct tty_struct *tty)
 
 	if (C_CRTSCTS(tty))
 		if (!(sdio_uart_get_mctrl(port) & TIOCM_CTS))
-			tty->hw_stopped = 1;
+			tty->hw_stopped = true;
 
 	clear_bit(TTY_IO_ERROR, &tty->flags);
 
@@ -882,14 +882,14 @@ static void sdio_uart_set_termios(struct tty_struct *tty,
 
 	/* Handle turning off CRTSCTS */
 	if ((old_termios->c_cflag & CRTSCTS) && !(cflag & CRTSCTS)) {
-		tty->hw_stopped = 0;
+		tty->hw_stopped = false;
 		sdio_uart_start_tx(port);
 	}
 
 	/* Handle turning on CRTSCTS */
 	if (!(old_termios->c_cflag & CRTSCTS) && (cflag & CRTSCTS)) {
 		if (!(sdio_uart_get_mctrl(port) & TIOCM_CTS)) {
-			tty->hw_stopped = 1;
+			tty->hw_stopped = true;
 			sdio_uart_stop_tx(port);
 		}
 	}

drivers/tty/amiserial.c

@@ -347,7 +347,7 @@ static void check_modem_status(struct serial_state *info)
 #if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW))
 				printk("CTS tx start...");
 #endif
-				port->tty->hw_stopped = 0;
+				port->tty->hw_stopped = false;
 				info->IER |= UART_IER_THRI;
 				amiga_custom.intena = IF_SETCLR | IF_TBE;
 				mb();
@@ -362,7 +362,7 @@ static void check_modem_status(struct serial_state *info)
 #if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW))
 				printk("CTS tx stop...");
 #endif
-				port->tty->hw_stopped = 1;
+				port->tty->hw_stopped = true;
 				info->IER &= ~UART_IER_THRI;
 				/* disable Tx interrupt and remove any pending interrupts */
 				amiga_custom.intena = IF_TBE;
@@ -1197,7 +1197,7 @@ static void rs_set_termios(struct tty_struct *tty, const struct ktermios *old_te
 
 	/* Handle turning off CRTSCTS */
 	if ((old_termios->c_cflag & CRTSCTS) && !C_CRTSCTS(tty)) {
-		tty->hw_stopped = 0;
+		tty->hw_stopped = false;
 		rs_start(tty);
 	}
 

drivers/tty/mxser.c

@@ -553,7 +553,7 @@ static void mxser_handle_cts(struct tty_struct *tty, struct mxser_port *info,
 
 	if (tty->hw_stopped) {
 		if (cts) {
-			tty->hw_stopped = 0;
+			tty->hw_stopped = false;
 
 			if (!mxser_16550A_or_MUST(info))
 				__mxser_start_tx(info);
@@ -563,7 +563,7 @@ static void mxser_handle_cts(struct tty_struct *tty, struct mxser_port *info,
 	} else if (cts)
 		return;
 
-	tty->hw_stopped = 1;
+	tty->hw_stopped = true;
 	if (!mxser_16550A_or_MUST(info))
 		__mxser_stop_tx(info);
 }
@@ -1361,7 +1361,7 @@ static void mxser_set_termios(struct tty_struct *tty,
 	spin_unlock_irqrestore(&info->slock, flags);
 
 	if ((old_termios->c_cflag & CRTSCTS) && !C_CRTSCTS(tty)) {
-		tty->hw_stopped = 0;
+		tty->hw_stopped = false;
 		mxser_start(tty);
 	}
 

drivers/tty/synclink_gt.c

@@ -730,7 +730,7 @@ static void set_termios(struct tty_struct *tty,
 
 	/* Handle turning off CRTSCTS */
 	if ((old_termios->c_cflag & CRTSCTS) && !C_CRTSCTS(tty)) {
-		tty->hw_stopped = 0;
+		tty->hw_stopped = false;
 		tx_release(tty);
 	}
 }
@@ -1953,13 +1953,13 @@ static void cts_change(struct slgt_info *info, unsigned short status)
 		if (info->port.tty) {
 			if (info->port.tty->hw_stopped) {
 				if (info->signals & SerialSignal_CTS) {
-		 			info->port.tty->hw_stopped = 0;
+					info->port.tty->hw_stopped = false;
 					info->pending_bh |= BH_TRANSMIT;
 					return;
 				}
 			} else {
 				if (!(info->signals & SerialSignal_CTS))
-		 			info->port.tty->hw_stopped = 1;
+					info->port.tty->hw_stopped = true;
 			}
 		}
 	}

include/linux/tty.h

@@ -227,7 +227,7 @@ struct tty_struct {
 		unsigned long unused[0];
 	} __aligned(sizeof(unsigned long)) ctrl;
 
-	int hw_stopped;
+	bool hw_stopped;
 	unsigned int receive_room;
 	int flow_change;