b43: N-PHY: define channel table struct for rev3+ devices

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/b43/radio_2056.c

@@ -24,9 +24,60 @@
 #include "radio_2056.h"
 #include "phy_common.h"
 
+#define RADIOREGS3(r00, r01, r02, r03, r04, r05, r06, r07, r08, r09, \
+		   r10, r11, r12, r13, r14, r15, r16, r17, r18, r19, \
+		   r20, r21, r22, r23, r24, r25, r26, r27, r28, r29, \
+		   r30, r31, r32, r33, r34, r35, r36) \
+	.radio_syn_pll_vcocal1		= r00,	\
+	.radio_syn_pll_vcocal2		= r01,	\
+	.radio_syn_pll_refdiv		= r02,	\
+	.radio_syn_pll_mmd2		= r03,	\
+	.radio_syn_pll_mmd1		= r04,	\
+	.radio_syn_pll_loopfilter1	= r05,	\
+	.radio_syn_pll_loopfilter2	= r06,	\
+	.radio_syn_pll_loopfilter3	= r07,	\
+	.radio_syn_pll_loopfilter4	= r08,	\
+	.radio_syn_pll_loopfilter5	= r09,	\
+	.radio_syn_reserved_addr27	= r10,	\
+	.radio_syn_reserved_addr28	= r11,	\
+	.radio_syn_reserved_addr29	= r12,	\
+	.radio_syn_logen_vcobuf1	= r13,	\
+	.radio_syn_logen_mixer2		= r14,	\
+	.radio_syn_logen_buf3		= r15,	\
+	.radio_syn_logen_buf4		= r16,	\
+	.radio_rx0_lnaa_tune		= r17,	\
+	.radio_rx0_lnag_tune		= r18,	\
+	.radio_tx0_intpaa_boost_tune	= r19,	\
+	.radio_tx0_intpag_boost_tune	= r20,	\
+	.radio_tx0_pada_boost_tune	= r21,	\
+	.radio_tx0_padg_boost_tune	= r22,	\
+	.radio_tx0_pgaa_boost_tune	= r23,	\
+	.radio_tx0_pgag_boost_tune	= r24,	\
+	.radio_tx0_mixa_boost_tune	= r25,	\
+	.radio_tx0_mixg_boost_tune	= r26,	\
+	.radio_rx1_lnaa_tune		= r27,	\
+	.radio_rx1_lnag_tune		= r28,	\
+	.radio_tx1_intpaa_boost_tune	= r29,	\
+	.radio_tx1_intpag_boost_tune	= r30,	\
+	.radio_tx1_pada_boost_tune	= r31,	\
+	.radio_tx1_padg_boost_tune	= r32,	\
+	.radio_tx1_pgaa_boost_tune	= r33,	\
+	.radio_tx1_pgag_boost_tune	= r34,	\
+	.radio_tx1_mixa_boost_tune	= r35,	\
+	.radio_tx1_mixg_boost_tune	= r36
+
+#define PHYREGS(r0, r1, r2, r3, r4, r5)	\
+	.phy_regs.phy_bw1a	= r0,	\
+	.phy_regs.phy_bw2	= r1,	\
+	.phy_regs.phy_bw3	= r2,	\
+	.phy_regs.phy_bw4	= r3,	\
+	.phy_regs.phy_bw5	= r4,	\
+	.phy_regs.phy_bw6	= r5
+
 static const struct b43_nphy_channeltab_entry_rev3 b43_nphy_channeltab_rev3[] = {
 };
 
+/* TODO: add support for rev4+ devices by searching in rev4+ tables */
 const struct b43_nphy_channeltab_entry_rev3 *
 b43_nphy_get_chantabent_rev3(struct b43_wldev *dev, u16 freq)
 {

drivers/net/wireless/b43/radio_2056.h

@@ -29,12 +29,46 @@
 #include "tables_nphy.h"
 
 struct b43_nphy_channeltab_entry_rev3 {
-	/* The channel number */
-	u8 channel;
 	/* The channel frequency in MHz */
 	u16 freq;
 	/* Radio register values on channelswitch */
-	/* TODO */
+	u8 radio_syn_pll_vcocal1;
+	u8 radio_syn_pll_vcocal2;
+	u8 radio_syn_pll_refdiv;
+	u8 radio_syn_pll_mmd2;
+	u8 radio_syn_pll_mmd1;
+	u8 radio_syn_pll_loopfilter1;
+	u8 radio_syn_pll_loopfilter2;
+	u8 radio_syn_pll_loopfilter3;
+	u8 radio_syn_pll_loopfilter4;
+	u8 radio_syn_pll_loopfilter5;
+	u8 radio_syn_reserved_addr27;
+	u8 radio_syn_reserved_addr28;
+	u8 radio_syn_reserved_addr29;
+	u8 radio_syn_logen_vcobuf1;
+	u8 radio_syn_logen_mixer2;
+	u8 radio_syn_logen_buf3;
+	u8 radio_syn_logen_buf4;
+	u8 radio_rx0_lnaa_tune;
+	u8 radio_rx0_lnag_tune;
+	u8 radio_tx0_intpaa_boost_tune;
+	u8 radio_tx0_intpag_boost_tune;
+	u8 radio_tx0_pada_boost_tune;
+	u8 radio_tx0_padg_boost_tune;
+	u8 radio_tx0_pgaa_boost_tune;
+	u8 radio_tx0_pgag_boost_tune;
+	u8 radio_tx0_mixa_boost_tune;
+	u8 radio_tx0_mixg_boost_tune;
+	u8 radio_rx1_lnaa_tune;
+	u8 radio_rx1_lnag_tune;
+	u8 radio_tx1_intpaa_boost_tune;
+	u8 radio_tx1_intpag_boost_tune;
+	u8 radio_tx1_pada_boost_tune;
+	u8 radio_tx1_padg_boost_tune;
+	u8 radio_tx1_pgaa_boost_tune;
+	u8 radio_tx1_pgag_boost_tune;
+	u8 radio_tx1_mixa_boost_tune;
+	u8 radio_tx1_mixg_boost_tune;
 	/* PHY register values on channelswitch */
 	struct b43_phy_n_sfo_cfg phy_regs;
 };