iio: st_lsm6dsx: Make use of device properties

Device property API allows to gather device resources from different sources,
such as ACPI. Convert the drivers to unleash the power of device property API.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c

@@ -54,6 +54,7 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/pm.h>
+#include <linux/property.h>
 #include <linux/regmap.h>
 #include <linux/bitfield.h>
 
@@ -1804,14 +1805,14 @@ static const struct iio_info st_lsm6dsx_gyro_info = {
 	.hwfifo_set_watermark = st_lsm6dsx_set_watermark,
 };
 
-static int st_lsm6dsx_of_get_drdy_pin(struct st_lsm6dsx_hw *hw, int *drdy_pin)
+static int st_lsm6dsx_get_drdy_pin(struct st_lsm6dsx_hw *hw, int *drdy_pin)
 {
-	struct device_node *np = hw->dev->of_node;
+	struct device *dev = hw->dev;
 
-	if (!np)
+	if (!dev_fwnode(dev))
 		return -EINVAL;
 
-	return of_property_read_u32(np, "st,drdy-int-pin", drdy_pin);
+	return device_property_read_u32(dev, "st,drdy-int-pin", drdy_pin);
 }
 
 static int
@@ -1820,7 +1821,7 @@ st_lsm6dsx_get_drdy_reg(struct st_lsm6dsx_hw *hw,
 {
 	int err = 0, drdy_pin;
 
-	if (st_lsm6dsx_of_get_drdy_pin(hw, &drdy_pin) < 0) {
+	if (st_lsm6dsx_get_drdy_pin(hw, &drdy_pin) < 0) {
 		struct st_sensors_platform_data *pdata;
 		struct device *dev = hw->dev;
 
@@ -1849,15 +1850,15 @@ st_lsm6dsx_get_drdy_reg(struct st_lsm6dsx_hw *hw,
 static int st_lsm6dsx_init_shub(struct st_lsm6dsx_hw *hw)
 {
 	const struct st_lsm6dsx_shub_settings *hub_settings;
-	struct device_node *np = hw->dev->of_node;
 	struct st_sensors_platform_data *pdata;
+	struct device *dev = hw->dev;
 	unsigned int data;
 	int err = 0;
 
 	hub_settings = &hw->settings->shub_settings;
 
-	pdata = (struct st_sensors_platform_data *)hw->dev->platform_data;
-	if ((np && of_property_read_bool(np, "st,pullups")) ||
+	pdata = (struct st_sensors_platform_data *)dev->platform_data;
+	if ((dev_fwnode(dev) && device_property_read_bool(dev, "st,pullups")) ||
 	    (pdata && pdata->pullups)) {
 		err = st_lsm6dsx_set_page(hw, true);
 		if (err < 0)
@@ -2135,9 +2136,9 @@ static irqreturn_t st_lsm6dsx_handler_thread(int irq, void *private)
 
 static int st_lsm6dsx_irq_setup(struct st_lsm6dsx_hw *hw)
 {
-	struct device_node *np = hw->dev->of_node;
 	struct st_sensors_platform_data *pdata;
 	const struct st_lsm6dsx_reg *reg;
+	struct device *dev = hw->dev;
 	unsigned long irq_type;
 	bool irq_active_low;
 	int err;
@@ -2165,8 +2166,8 @@ static int st_lsm6dsx_irq_setup(struct st_lsm6dsx_hw *hw)
 	if (err < 0)
 		return err;
 
-	pdata = (struct st_sensors_platform_data *)hw->dev->platform_data;
-	if ((np && of_property_read_bool(np, "drive-open-drain")) ||
+	pdata = (struct st_sensors_platform_data *)dev->platform_data;
+	if ((dev_fwnode(dev) && device_property_read_bool(dev, "drive-open-drain")) ||
 	    (pdata && pdata->open_drain)) {
 		reg = &hw->settings->irq_config.od;
 		err = regmap_update_bits(hw->regmap, reg->addr, reg->mask,
@@ -2196,7 +2197,6 @@ int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id,
 {
 	struct st_sensors_platform_data *pdata = dev->platform_data;
 	const struct st_lsm6dsx_shub_settings *hub_settings;
-	struct device_node *np = dev->of_node;
 	struct st_lsm6dsx_hw *hw;
 	const char *name = NULL;
 	int i, err;
@@ -2259,7 +2259,7 @@ int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id,
 			return err;
 	}
 
-	if ((np && of_property_read_bool(np, "wakeup-source")) ||
+	if ((dev_fwnode(dev) && device_property_read_bool(dev, "wakeup-source")) ||
 	    (pdata && pdata->wakeup_source))
 		device_init_wakeup(dev, true);