arm64: dts: qcom: sdm845-mtp: Add Truly display

Bring in the Truly display and enable the DSI channels to make the
mdss/gpu probe, even though we're lacking LABIB, preventing us from
seeing anything on the screen.
Tested-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Link: https://lore.kernel.org/r/20190513210747.22429-1-bjorn.andersson@linaro.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arch/arm64/boot/dts/qcom/sdm845-mtp.dts

@@ -352,6 +352,80 @@ &cdsp_pas {
 	status = "okay";
 };
 
+&dsi0 {
+	status = "okay";
+	vdda-supply = <&vdda_mipi_dsi0_1p2>;
+
+	qcom,dual-dsi-mode;
+	qcom,master-dsi;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	ports {
+		port@1 {
+			endpoint {
+				remote-endpoint = <&truly_in_0>;
+				data-lanes = <0 1 2 3>;
+			};
+		};
+	};
+
+	panel@0 {
+		compatible = "truly,nt35597-2K-display";
+		reg = <0>;
+		vdda-supply = <&vreg_l14a_1p88>;
+
+		reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+		mode-gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				truly_in_0: endpoint {
+					remote-endpoint = <&dsi0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				truly_in_1: endpoint {
+					remote-endpoint = <&dsi1_out>;
+				};
+			};
+		};
+	};
+};
+
+&dsi0_phy {
+	status = "okay";
+	vdds-supply = <&vdda_mipi_dsi0_pll>;
+};
+
+&dsi1 {
+	status = "okay";
+	vdda-supply = <&vdda_mipi_dsi1_1p2>;
+
+	qcom,dual-dsi-mode;
+
+	ports {
+		port@1 {
+			endpoint {
+				remote-endpoint = <&truly_in_1>;
+				data-lanes = <0 1 2 3>;
+			};
+		};
+	};
+};
+
+&dsi1_phy {
+	status = "okay";
+	vdds-supply = <&vdda_mipi_dsi1_pll>;
+};
+
 &gcc {
 	protected-clocks = <GCC_QSPI_CORE_CLK>,
 			   <GCC_QSPI_CORE_CLK_SRC>,
@@ -372,6 +446,14 @@ &i2c10 {
 	clock-frequency = <400000>;
 };
 
+&mdss {
+	status = "okay";
+};
+
+&mdss_mdp {
+	status = "okay";
+};
+
 &qupv3_id_1 {
 	status = "okay";
 };