clk: qcom: clk-hfpll: switch to .determine_rate

.determine_rate is meant to replace .round_rate. The former comes with a
benefit which is especially relevant on 32-bit systems: since
.determine_rate uses an "unsigned long" (compared to a "signed long"
which is used by .round_rate) the maximum value on 32-bit systems
increases from 2^31 (or approx. 2.14GHz) to 2^32 (or approx. 4.29GHz).
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Tested-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230212-clk-qcom-determine_rate-v1-2-b4e447d4926e@z3ntu.xyz

drivers/clk/qcom/clk-hfpll.c

@@ -128,20 +128,20 @@ static void clk_hfpll_disable(struct clk_hw *hw)
 	spin_unlock_irqrestore(&h->lock, flags);
 }
 
-static long clk_hfpll_round_rate(struct clk_hw *hw, unsigned long rate,
-				 unsigned long *parent_rate)
+static int clk_hfpll_determine_rate(struct clk_hw *hw, struct clk_rate_request *req)
 {
 	struct clk_hfpll *h = to_clk_hfpll(hw);
 	struct hfpll_data const *hd = h->d;
 	unsigned long rrate;
 
-	rate = clamp(rate, hd->min_rate, hd->max_rate);
+	req->rate = clamp(req->rate, hd->min_rate, hd->max_rate);
 
-	rrate = DIV_ROUND_UP(rate, *parent_rate) * *parent_rate;
+	rrate = DIV_ROUND_UP(req->rate, req->best_parent_rate) * req->best_parent_rate;
 	if (rrate > hd->max_rate)
-		rrate -= *parent_rate;
+		rrate -= req->best_parent_rate;
 
-	return rrate;
+	req->rate = rrate;
+	return 0;
 }
 
 /*
@@ -241,7 +241,7 @@ const struct clk_ops clk_ops_hfpll = {
 	.enable = clk_hfpll_enable,
 	.disable = clk_hfpll_disable,
 	.is_enabled = hfpll_is_enabled,
-	.round_rate = clk_hfpll_round_rate,
+	.determine_rate = clk_hfpll_determine_rate,
 	.set_rate = clk_hfpll_set_rate,
 	.recalc_rate = clk_hfpll_recalc_rate,
 	.init = clk_hfpll_init,