dt-bindings: Add missing array size constraints

DT properties which can have multiple entries need to specify what the
entries are and define how many entries there can be. In the case of
only a single entry, just 'maxItems: 1' is sufficient.

Add the missing entry constraints. These were found with a modified
meta-schema. Unfortunately, there are a few cases where the size
constraints are not defined such as common bindings, so the meta-schema
can't be part of the normal checks.

Cc: Jens Axboe <axboe@kernel.dk>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: MyungJoo Ham <myungjoo.ham@samsung.com>
Cc: Chanwoo Choi <cw00.choi@samsung.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for-iio
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Suman Anna <s-anna@ti.com>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210104230253.2805217-1-robh@kernel.orgSigned-off-by: Rob Herring <robh@kernel.org>

Documentation/devicetree/bindings/arm/socionext/socionext,uniphier-system-cache.yaml

@@ -30,8 +30,8 @@ properties:
       Interrupts can be used to notify the completion of cache operations.
       The number of interrupts should match to the number of CPU cores.
       The specified interrupts correspond to CPU0, CPU1, ... in this order.
-      minItems: 1
-      maxItems: 4
+    minItems: 1
+    maxItems: 4
 
   cache-unified: true
 

Documentation/devicetree/bindings/ata/sata_highbank.yaml

@@ -61,6 +61,7 @@ properties:
     maxItems: 8
 
   calxeda,sgpio-gpio:
+    maxItems: 3
     description: |
       phandle-gpio bank, bit offset, and default on or off, which indicates
       that the driver supports SGPIO indicator lights using the indicated

Documentation/devicetree/bindings/clock/canaan,k210-clk.yaml

@@ -22,6 +22,7 @@ properties:
     const: canaan,k210-clk
 
   clocks:
+    maxItems: 1
     description:
       Phandle of the SoC 26MHz fixed-rate oscillator clock.
 

Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml

@@ -60,6 +60,7 @@ properties:
       Phandle of the I2C controller used for DDC EDID probing
 
   hpd-gpios:
+    maxItems: 1
     description: >
       The GPIO pin for the HDMI hotplug detect (if it doesn't appear
       as an interrupt/status bit in the HDMI controller itself)

Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml

@@ -37,6 +37,7 @@ properties:
       Phandle of the I2C controller used for DDC EDID probing
 
   hpd-gpios:
+    maxItems: 1
     description: >
       The GPIO pin for the HDMI hotplug detect (if it doesn't appear
       as an interrupt/status bit in the HDMI controller itself)

Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml

@@ -30,6 +30,7 @@ properties:
       power supply for LCM (1.8V)
 
   dcdc-en-gpios:
+    maxItems: 1
     description: |
       phandle of the gpio for power ic line
       Power IC supply enable, High active

Documentation/devicetree/bindings/display/panel/mantix,mlaf057we51-x.yaml

@@ -37,7 +37,8 @@ properties:
 
   reset-gpios: true
 
-  'mantix,tp-rstn-gpios':
+  mantix,tp-rstn-gpios:
+    maxItems: 1
     description: second reset line that triggers DSI config load
 
   backlight: true

Documentation/devicetree/bindings/display/panel/novatek,nt36672a.yaml

@@ -30,6 +30,7 @@ properties:
       panel. The novatek,nt36672a compatible shall always be provided as a fallback.
 
   reset-gpios:
+    maxItems: 1
     description: phandle of gpio for reset line - This should be 8mA, gpio
       can be configured using mux, pinctrl, pinctrl-names (active high)
 

Documentation/devicetree/bindings/dsp/fsl,dsp.yaml

@@ -21,7 +21,7 @@ properties:
       - fsl,imx8mp-dsp
 
   reg:
-    description: Should contain register location and length
+    maxItems: 1
 
   clocks:
     items:

Documentation/devicetree/bindings/eeprom/at25.yaml

@@ -39,8 +39,7 @@ properties:
           - const: atmel,at25
 
   reg:
-    description:
-      Chip select number.
+    maxItems: 1
 
   spi-max-frequency: true
 

Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml

@@ -19,6 +19,7 @@ properties:
     const: nxp,ptn5150
 
   int-gpios:
+    maxItems: 1
     deprecated: true
     description:
       GPIO pin (input) connected to the PTN5150's INTB pin.
@@ -31,6 +32,7 @@ properties:
     maxItems: 1
 
   vbus-gpios:
+    maxItems: 1
     description:
       GPIO pin (output) used to control VBUS. If skipped, no such control
       takes place.

Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml

@@ -81,6 +81,7 @@ properties:
     const: 2
 
   reset-gpios:
+    maxItems: 1
     description:
       GPIO specification for the RESET input. This is an active low signal to
       the PCA953x.  Not valid for Maxim MAX732x devices.

Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml

@@ -40,6 +40,7 @@ properties:
       ADC reference voltage supply
 
   adi,sync-in-gpios:
+    maxItems: 1
     description:
       Enables synchronization of multiple devices that require simultaneous
       sampling. A pulse is always required if the configuration is changed
@@ -76,6 +77,7 @@ patternProperties:
 
     properties:
       reg:
+        maxItems: 1
         description: |
           The channel number.
 

Documentation/devicetree/bindings/iio/adc/aspeed,ast2400-adc.yaml

@@ -23,6 +23,7 @@ properties:
     maxItems: 1
 
   clocks:
+    maxItems: 1
     description:
       Input clock used to derive the sample clock. Expected to be the
       SoC's APB clock.

Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml

@@ -20,7 +20,7 @@ properties:
     description: Power supply for the reference voltage
 
   reg:
-    description: spi chipselect number according to the usual spi bindings
+    maxItems: 1
 
   spi-max-frequency:
     description: maximal spi bus frequency supported

Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml

@@ -68,6 +68,7 @@ patternProperties:
 
     properties:
       reg:
+        maxItems: 1
         description: |
           ADC channel number.
           See include/dt-bindings/iio/qcom,spmi-vadc.h

Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml

@@ -41,6 +41,8 @@ properties:
     maxItems: 2
 
   clocks:
+    minItems: 1
+    maxItems: 2
     description: |
       Core can use up to two clocks, depending on part used:
         - "adc" clock: for the analog circuitry, common to all ADCs.

Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml

@@ -47,6 +47,7 @@ properties:
     description: an optional 3x3 mounting rotation matrix.
 
   reset-gpios:
+    maxItems: 1
     description: |
       an optional pin needed for AK09911 to set the reset state. This should
       be usually active low

Documentation/devicetree/bindings/iio/potentiometer/adi,ad5272.yaml

@@ -25,6 +25,7 @@ properties:
     maxItems: 1
 
   reset-gpios:
+    maxItems: 1
     description:
       Active low signal to the AD5272 RESET input.
 

Documentation/devicetree/bindings/input/touchscreen/elan,elants_i2c.yaml

@@ -29,6 +29,7 @@ properties:
     description: touchscreen can be used as a wakeup source.
 
   reset-gpios:
+    maxItems: 1
     description: reset gpio the chip is connected to.
 
   vcc33-supply:

Documentation/devicetree/bindings/interrupt-controller/fsl,intmux.yaml

@@ -31,7 +31,7 @@ properties:
       The 1st cell is hw interrupt number, the 2nd cell is channel index.
 
   clocks:
-    description: ipg clock.
+    maxItems: 1
 
   clock-names:
     const: ipg

Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml

@@ -36,6 +36,8 @@ properties:
       Reference to a phandle of a hardware spinlock provider node.
 
   interrupts:
+    minItems: 1
+    maxItems: 96
     description:
       Interrupts references to primary interrupt controller
 

Documentation/devicetree/bindings/media/allwinner,sun4i-a10-video-engine.yaml

@@ -53,6 +53,7 @@ properties:
     maxItems: 1
 
   memory-region:
+    maxItems: 1
     description:
       CMA pool to use for buffers allocation instead of the default
       CMA pool.

Documentation/devicetree/bindings/media/i2c/imx219.yaml

@@ -40,6 +40,7 @@ properties:
       Digital core voltage supply, 1.2 volts
 
   reset-gpios:
+    maxItems: 1
     description: |-
       Reference to the GPIO connected to the xclr pin, if any.
       Must be released (set high) after all supplies are applied.

Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml

@@ -28,6 +28,8 @@ properties:
     const: 1
 
   ranges:
+    minItems: 1
+    maxItems: 4
     description: |
       Reflects the memory layout with four integer values per bank. Format:
       <bank-number> 0 <parent address of bank> <size>

Documentation/devicetree/bindings/misc/fsl,dpaa2-console.yaml

@@ -15,6 +15,7 @@ properties:
     const: "fsl,dpaa2-console"
 
   reg:
+    maxItems: 1
     description: A standard property. Specifies the region where the MCFBA
                 (MC firmware base address) register can be found.
 

Documentation/devicetree/bindings/mmc/mmc-controller.yaml

@@ -40,6 +40,7 @@ properties:
       There is no card detection available; polling must be used.
 
   cd-gpios:
+    maxItems: 1
     description:
       The card detection will be done using the GPIO provided.
 
@@ -104,6 +105,7 @@ properties:
       line. Not used in combination with eMMC or SDIO.
 
   wp-gpios:
+    maxItems: 1
     description:
       GPIO to use for the write-protect detection.
 

Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml

@@ -66,6 +66,7 @@ properties:
   dma-coherent: true
 
   clocks:
+    maxItems: 1
     description: CPSW2G NUSS functional clock
 
   clock-names:

Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml

@@ -59,6 +59,7 @@ properties:
       - const: cpts
 
   clocks:
+    maxItems: 1
     description: CPTS reference clock
 
   clock-names:

Documentation/devicetree/bindings/phy/allwinner,sun4i-a10-usb-phy.yaml

@@ -51,9 +51,11 @@ properties:
       - const: usb2_reset
 
   usb0_id_det-gpios:
+    maxItems: 1
     description: GPIO to the USB OTG ID pin
 
   usb0_vbus_det-gpios:
+    maxItems: 1
     description: GPIO to the USB OTG VBUS detect pin
 
   usb0_vbus_power-supply:

Documentation/devicetree/bindings/phy/allwinner,sun50i-a64-usb-phy.yaml

@@ -50,9 +50,11 @@ properties:
       - const: usb1_reset
 
   usb0_id_det-gpios:
+    maxItems: 1
     description: GPIO to the USB OTG ID pin
 
   usb0_vbus_det-gpios:
+    maxItems: 1
     description: GPIO to the USB OTG VBUS detect pin
 
   usb0_vbus_power-supply:

Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb-phy.yaml

@@ -50,9 +50,11 @@ properties:
       - const: usb3_reset
 
   usb0_id_det-gpios:
+    maxItems: 1
     description: GPIO to the USB OTG ID pin
 
   usb0_vbus_det-gpios:
+    maxItems: 1
     description: GPIO to the USB OTG VBUS detect pin
 
   usb0_vbus_power-supply:

Documentation/devicetree/bindings/phy/allwinner,sun5i-a13-usb-phy.yaml

@@ -45,9 +45,11 @@ properties:
       - const: usb1_reset
 
   usb0_id_det-gpios:
+    maxItems: 1
     description: GPIO to the USB OTG ID pin
 
   usb0_vbus_det-gpios:
+    maxItems: 1
     description: GPIO to the USB OTG VBUS detect pin
 
   usb0_vbus_power-supply:

Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-usb-phy.yaml

@@ -54,9 +54,11 @@ properties:
       - const: usb2_reset
 
   usb0_id_det-gpios:
+    maxItems: 1
     description: GPIO to the USB OTG ID pin
 
   usb0_vbus_det-gpios:
+    maxItems: 1
     description: GPIO to the USB OTG VBUS detect pin
 
   usb0_vbus_power-supply:

Documentation/devicetree/bindings/phy/allwinner,sun8i-a23-usb-phy.yaml

@@ -50,9 +50,11 @@ properties:
       - const: usb1_reset
 
   usb0_id_det-gpios:
+    maxItems: 1
     description: GPIO to the USB OTG ID pin
 
   usb0_vbus_det-gpios:
+    maxItems: 1
     description: GPIO to the USB OTG VBUS detect pin
 
   usb0_vbus_power-supply:

Documentation/devicetree/bindings/phy/allwinner,sun8i-a83t-usb-phy.yaml

@@ -56,9 +56,11 @@ properties:
       - const: usb2_reset
 
   usb0_id_det-gpios:
+    maxItems: 1
     description: GPIO to the USB OTG ID pin
 
   usb0_vbus_det-gpios:
+    maxItems: 1
     description: GPIO to the USB OTG VBUS detect pin
 
   usb0_vbus_power-supply:

Documentation/devicetree/bindings/phy/allwinner,sun8i-h3-usb-phy.yaml

@@ -62,9 +62,11 @@ properties:
       - const: usb3_reset
 
   usb0_id_det-gpios:
+    maxItems: 1
     description: GPIO to the USB OTG ID pin
 
   usb0_vbus_det-gpios:
+    maxItems: 1
     description: GPIO to the USB OTG VBUS detect pin
 
   usb0_vbus_power-supply:

Documentation/devicetree/bindings/phy/allwinner,sun8i-r40-usb-phy.yaml

@@ -56,9 +56,11 @@ properties:
       - const: usb2_reset
 
   usb0_id_det-gpios:
+    maxItems: 1
     description: GPIO to the USB OTG ID pin
 
   usb0_vbus_det-gpios:
+    maxItems: 1
     description: GPIO to the USB OTG VBUS detect pin
 
   usb0_vbus_power-supply:

Documentation/devicetree/bindings/phy/allwinner,sun8i-v3s-usb-phy.yaml

@@ -42,9 +42,11 @@ properties:
     const: usb0_reset
 
   usb0_id_det-gpios:
+    maxItems: 1
     description: GPIO to the USB OTG ID pin
 
   usb0_vbus_det-gpios:
+    maxItems: 1
     description: GPIO to the USB OTG VBUS detect pin
 
   usb0_vbus_power-supply:

Documentation/devicetree/bindings/phy/allwinner,sun9i-a80-usb-phy.yaml

@@ -22,7 +22,8 @@ properties:
 
   clocks:
     anyOf:
-      - description: Main PHY Clock
+      - maxItems: 1
+        description: Main PHY Clock
 
       - items:
           - description: Main PHY clock
@@ -39,20 +40,16 @@ properties:
           - const: hsic_480M
 
   resets:
-    anyOf:
+    minItems: 1
+    items:
       - description: Normal USB PHY reset
-
-      - items:
-          - description: Normal USB PHY reset
-          - description: HSIC Reset
+      - description: HSIC Reset
 
   reset-names:
-    oneOf:
+    minItems: 1
+    items:
       - const: phy
-
-      - items:
-          - const: phy
-          - const: hsic
+      - const: hsic
 
   phy_type:
     const: hsic

Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml

@@ -20,7 +20,7 @@ properties:
       - socionext,uniphier-pxs3-ahci-phy
 
   reg:
-    description: PHY register region (offset and length)
+    maxItems: 1
 
   "#phy-cells":
     const: 0

Documentation/devicetree/bindings/phy/socionext,uniphier-pcie-phy.yaml

@@ -21,7 +21,7 @@ properties:
       - socionext,uniphier-pxs3-pcie-phy
 
   reg:
-    description: PHY register region (offset and length)
+    maxItems: 1
 
   "#phy-cells":
     const: 0

Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml

@@ -24,7 +24,7 @@ properties:
       - socionext,uniphier-pxs3-usb3-hsphy
 
   reg:
-    description: PHY register region (offset and length)
+    maxItems: 1
 
   "#phy-cells":
     const: 0

Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml

@@ -25,7 +25,7 @@ properties:
       - socionext,uniphier-pxs3-usb3-ssphy
 
   reg:
-    description: PHY register region (offset and length)
+    maxItems: 1
 
   "#phy-cells":
     const: 0

Documentation/devicetree/bindings/phy/ti,phy-gmii-sel.yaml

@@ -55,7 +55,7 @@ properties:
       - ti,am654-phy-gmii-sel
 
   reg:
-    description: Address and length of the register set for the device
+    maxItems: 1
 
   '#phy-cells': true
 

Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml

@@ -23,8 +23,7 @@ properties:
   compatible:
     const: aspeed,ast2400-pinctrl
   reg:
-    description: |
-      A hint for the memory regions associated with the pin-controller
+    maxItems: 2
 
 patternProperties:
   '^.*$':

Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml

@@ -24,8 +24,8 @@ properties:
   compatible:
     const: aspeed,ast2500-pinctrl
   reg:
-    description: |
-      A hint for the memory regions associated with the pin-controller
+    maxItems: 2
+
   aspeed,external-nodes:
     minItems: 2
     maxItems: 2

Documentation/devicetree/bindings/power/supply/bq25980.yaml

@@ -70,6 +70,7 @@ properties:
     description: Enables bypass mode at boot time
 
   interrupts:
+    maxItems: 1
     description: |
       Indicates that the device state has changed.
 

Documentation/devicetree/bindings/remoteproc/ingenic,vpu.yaml

@@ -44,7 +44,7 @@ properties:
       - const: vpu
 
   interrupts:
-    description: VPU hardware interrupt
+    maxItems: 1
 
 required:
   - compatible

Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml

@@ -70,10 +70,13 @@ properties:
       the firmware image.
 
   clocks:
+    maxItems: 1
     description: |
       Main functional clock for the remote processor
 
   resets:
+    minItems: 1
+    maxItems: 2
     description: |
       Reset handles for the remote processor
 

Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml

@@ -63,6 +63,7 @@ properties:
   next-level-cache: true
 
   memory-region:
+    maxItems: 1
     description: |
       The reference to the reserved-memory for the L2 Loosely Integrated Memory region.
       The reserved memory node should be defined as per the bindings in reserved-memory.txt.

Documentation/devicetree/bindings/serial/renesas,hscif.yaml

@@ -81,6 +81,8 @@ properties:
     maxItems: 1
 
   dmas:
+    minItems: 2
+    maxItems: 4
     description:
       Must contain a list of pairs of references to DMA specifiers, one for
       transmission, and one for reception.

Documentation/devicetree/bindings/serial/renesas,scif.yaml

@@ -120,6 +120,8 @@ properties:
     maxItems: 1
 
   dmas:
+    minItems: 2
+    maxItems: 4
     description:
       Must contain a list of pairs of references to DMA specifiers, one for
       transmission, and one for reception.

Documentation/devicetree/bindings/serial/renesas,scifa.yaml

@@ -55,6 +55,8 @@ properties:
     maxItems: 1
 
   dmas:
+    minItems: 2
+    maxItems: 4
     description:
       Must contain a list of pairs of references to DMA specifiers, one for
       transmission, and one for reception.

Documentation/devicetree/bindings/serial/renesas,scifb.yaml

@@ -55,6 +55,8 @@ properties:
     maxItems: 1
 
   dmas:
+    minItems: 2
+    maxItems: 4
     description:
       Must contain a list of pairs of references to DMA specifiers, one for
       transmission, and one for reception.

Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml

@@ -88,6 +88,7 @@ properties:
     description: Phandle to the codec analog controls in the PRCM
 
   allwinner,pa-gpios:
+    maxItems: 1
     description: GPIO to enable the external amplifier
 
 required:

Documentation/devicetree/bindings/sound/google,sc7180-trogdor.yaml

@@ -55,6 +55,7 @@ patternProperties:
         maxItems: 1
 
       reg:
+        maxItems: 1
         description: dai link address.
 
       cpu:

Documentation/devicetree/bindings/sound/samsung,aries-wm8994.yaml

@@ -62,12 +62,15 @@ properties:
     description: Supply for the micbias on the headset mic
 
   earpath-sel-gpios:
+    maxItems: 1
     description: GPIO for switching between tv-out and mic paths
 
   headset-detect-gpios:
+    maxItems: 1
     description: GPIO for detection of headset insertion
 
   headset-key-gpios:
+    maxItems: 1
     description: GPIO for detection of headset key press
 
   io-channels:

Documentation/devicetree/bindings/sound/samsung,midas-audio.yaml

@@ -53,9 +53,11 @@ properties:
     description: Supply for the micbias on the Sub microphone
 
   fm-sel-gpios:
+    maxItems: 1
     description: GPIO pin for FM selection
 
   lineout-sel-gpios:
+    maxItems: 1
     description: GPIO pin for line out selection
 
 required:

Documentation/devicetree/bindings/sound/tas2562.yaml

@@ -36,10 +36,12 @@ properties:
        I2C address of the device can be one of these 0x4c, 0x4d, 0x4e or 0x4f
 
   shut-down-gpios:
+    maxItems: 1
     description: GPIO used to control the state of the device.
     deprecated: true
 
   shutdown-gpios:
+    maxItems: 1
     description: GPIO used to control the state of the device.
 
   interrupts:

Documentation/devicetree/bindings/sound/tas2770.yaml

@@ -27,9 +27,11 @@ properties:
        I2C address of the device can be between 0x41 to 0x48.
 
   reset-gpio:
+    maxItems: 1
     description: GPIO used to reset the device.
 
   shutdown-gpios:
+    maxItems: 1
     description: GPIO used to control the state of the device.
 
   interrupts:

Documentation/devicetree/bindings/sound/tlv320adcx140.yaml

@@ -35,6 +35,7 @@ properties:
       I2C addresss of the device can be one of these 0x4c, 0x4d, 0x4e or 0x4f
 
   reset-gpios:
+    maxItems: 1
     description: |
       GPIO used for hardware reset.
 

Documentation/devicetree/bindings/spi/renesas,rspi.yaml

@@ -68,6 +68,8 @@ properties:
     maxItems: 1
 
   dmas:
+    minItems: 2
+    maxItems: 4
     description:
       Must contain a list of pairs of references to DMA specifiers, one for
       transmission, and one for reception.

Documentation/devicetree/bindings/sram/sram.yaml

@@ -35,6 +35,7 @@ properties:
     maxItems: 1
 
   clocks:
+    maxItems: 1
     description:
       A list of phandle and clock specifier pair that controls the single
       SRAM clock.
@@ -46,6 +47,7 @@ properties:
     const: 1
 
   ranges:
+    maxItems: 1
     description:
       Should translate from local addresses within the sram to bus addresses.
 

Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml

@@ -22,6 +22,8 @@ properties:
     maxItems: 1
 
   interrupts:
+    minItems: 2
+    maxItems: 6
     description:
       List of timers interrupts
 

Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml

@@ -18,7 +18,7 @@ properties:
       - const: intel,ixp4xx-timer
 
   reg:
-    description: Should contain registers location and length
+    maxItems: 1
 
   interrupts:
     minItems: 1

Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.yaml

@@ -39,7 +39,7 @@ properties:
     maxItems: 1
 
   phys:
-    description: PHY specifier for the OTG PHY
+    maxItems: 1
 
   phy-names:
     const: usb

Documentation/devicetree/bindings/usb/brcm,usb-pinmap.yaml

@@ -22,6 +22,8 @@ properties:
     description: Interrupt for signals mirrored to out-gpios.
 
   in-gpios:
+    minItems: 1
+    maxItems: 2
     description: Array of one or two GPIO pins used for input signals.
 
   brcm,in-functions:
@@ -33,6 +35,7 @@ properties:
     description: Array of enable and mask pairs, one per gpio in-gpios.
 
   out-gpios:
+    maxItems: 1
     description: Array of one GPIO pin used for output signals.
 
   brcm,out-functions:

Documentation/devicetree/bindings/usb/generic-ehci.yaml

@@ -83,7 +83,7 @@ properties:
       Phandle of a companion.
 
   phys:
-    description: PHY specifier for the USB PHY
+    maxItems: 1
 
   phy-names:
     const: usb

Documentation/devicetree/bindings/usb/generic-ohci.yaml

@@ -71,7 +71,7 @@ properties:
       Overrides the detected port count
 
   phys:
-    description: PHY specifier for the USB PHY
+    maxItems: 1
 
   phy-names:
     const: usb

Documentation/devicetree/bindings/usb/ingenic,musb.yaml

@@ -40,7 +40,7 @@ properties:
       - const: mc
 
   phys:
-    description: PHY specifier for the USB PHY
+    maxItems: 1
 
   usb-role-switch:
     type: boolean

Documentation/devicetree/bindings/usb/renesas,usbhs.yaml

@@ -68,6 +68,7 @@ properties:
       Integer to use BUSWAIT register.
 
   renesas,enable-gpio:
+    maxItems: 1
     description: |
       gpio specifier to check GPIO determining if USB function should be
       enabled.

Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml

@@ -15,13 +15,14 @@ properties:
       - const: ti,j721e-usb
 
   reg:
-    description: module registers
+    maxItems: 1
 
   power-domains:
     description:
       PM domain provider node and an args specifier containing
       the USB device id value. See,
       Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
+    maxItems: 1
 
   clocks:
     description: Clock phandles to usb2_refclk and lpm_clk

Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml

@@ -43,12 +43,14 @@ properties:
     maxItems: 2
 
   power-domains:
+    maxItems: 1
     description: Should contain a phandle to a PM domain provider node
       and an args specifier containing the USB device id
       value. This property is as per the binding,
       Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
 
   phys:
+    maxItems: 1
     description:
       PHY specifier for the USB3.0 PHY. Some SoCs need the USB3.0 PHY
       to be turned on before the controller.