ARM: S5PC100: Add SCLK_SPDIF clock

This patch add SCLK_SPDIF clock to support source clock of S/PDIF
on S5PC100.
Signed-off-by: Seungwhan Youn <sw.youn@samsung.com>
Acked-by: Jassi Brar <jassi.brar@samsung.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

arch/arm/mach-s5pc100/clock.c

@@ -980,6 +980,64 @@ struct clksrc_sources clk_src_pwi = {
 	.nr_sources	= ARRAY_SIZE(clk_src_pwi_list),
 };
 
+static struct clk *clk_sclk_spdif_list[] = {
+	[0] = &clk_sclk_audio0.clk,
+	[1] = &clk_sclk_audio1.clk,
+	[2] = &clk_sclk_audio2.clk,
+};
+
+struct clksrc_sources clk_src_sclk_spdif = {
+	.sources	= clk_sclk_spdif_list,
+	.nr_sources	= ARRAY_SIZE(clk_sclk_spdif_list),
+};
+
+static int s5pc100_spdif_set_rate(struct clk *clk, unsigned long rate)
+{
+	struct clk *pclk;
+	int ret;
+
+	pclk = clk_get_parent(clk);
+	if (IS_ERR(pclk))
+		return -EINVAL;
+
+	ret = pclk->ops->set_rate(pclk, rate);
+	clk_put(pclk);
+
+	return ret;
+}
+
+static unsigned long s5pc100_spdif_get_rate(struct clk *clk)
+{
+	struct clk *pclk;
+	int rate;
+
+	pclk = clk_get_parent(clk);
+	if (IS_ERR(pclk))
+		return -EINVAL;
+
+	rate = pclk->ops->get_rate(clk);
+	clk_put(pclk);
+
+	return rate;
+}
+
+static struct clk_ops s5pc100_sclk_spdif_ops = {
+	.set_rate	= s5pc100_spdif_set_rate,
+	.get_rate	= s5pc100_spdif_get_rate,
+};
+
+static struct clksrc_clk clk_sclk_spdif = {
+	.clk	= {
+		.name		= "sclk_spdif",
+		.id		= -1,
+		.ctrlbit	= (1 << 11),
+		.enable		= s5pc100_sclk1_ctrl,
+		.ops		= &s5pc100_sclk_spdif_ops,
+	},
+	.sources = &clk_src_sclk_spdif,
+	.reg_src = { .reg = S5P_CLK_SRC3, .shift = 24, .size = 2 },
+};
+
 static struct clksrc_clk clksrcs[] = {
 	{
 		.clk	= {
@@ -1185,6 +1243,7 @@ static struct clksrc_clk *sysclks[] = {
 	&clk_sclk_audio0,
 	&clk_sclk_audio1,
 	&clk_sclk_audio2,
+	&clk_sclk_spdif,
 };
 
 void __init_or_cpufreq s5pc100_setup_clocks(void)