Commit 04e0ae8d authored by Arnd Bergmann's avatar Arnd Bergmann

Merge tag 'qcom-arm64-fixes-for-5.15' of...

Merge tag 'qcom-arm64-fixes-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes

Qualcomm ARM64 DTS fixes for 5.15

This starts by reverting the SC7280 CPUfreq update, which was merged
before concensus about the associated drivers changes was reached.

It then moves the reserved-memory changes done to get IPA working on the
Lenovo Yoga C630 into the Yoga specific DTS, as changing the memory map
on the platform level did break a couple of the other boards.

It fixes the HDMI audio on Trogdor and add missing Aggre2 NOC qos clocks
on SDM6{30,36,60} which prevented some boards from booting.

Lastly it enables the PON module on SM8250/QRB5165, as the lack thereof
is blocking automated testing in LKFT.

* tag 'qcom-arm64-fixes-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  arm64: dts: qcom: sdm630: Add missing a2noc qos clocks
  arm64: dts: qcom: qrb5165-rb5: enabled pwrkey and resin nodes
  arm64: dts: qcom: pm8150: specify reboot mode magics
  arm64: dts: qcom: pm8150: use qcom,pm8998-pon binding
  arm64: dts: qcom: sc7180-trogdor: Fix lpass dai link for HDMI
  arm64: dts: qcom: sdm850-yoga: Reshuffle IPA memory mappings
  Revert "arm64: dts: qcom: sc7280: Fixup the cpufreq node"

Link: https://lore.kernel.org/r/20210930025509.1091-1-bjorn.andersson@linaro.orgSigned-off-by: default avatarArnd Bergmann <arnd@arndb.de>
parents 2ecfddb1 1878f4b7
......@@ -48,8 +48,10 @@ pm8150_0: pmic@0 {
#size-cells = <0>;
pon: power-on@800 {
compatible = "qcom,pm8916-pon";
compatible = "qcom,pm8998-pon";
reg = <0x0800>;
mode-bootloader = <0x2>;
mode-recovery = <0x1>;
pon_pwrkey: pwrkey {
compatible = "qcom,pm8941-pwrkey";
......
......@@ -804,6 +804,16 @@ lt9611_rst_pin: lt9611-rst-pin {
};
};
&pon_pwrkey {
status = "okay";
};
&pon_resin {
status = "okay";
linux,code = <KEY_VOLUMEDOWN>;
};
&qupv3_id_0 {
status = "okay";
};
......
......@@ -273,7 +273,6 @@ sound: sound {
"Headphone Jack", "HPOL",
"Headphone Jack", "HPOR";
#sound-dai-cells = <0>;
#address-cells = <1>;
#size-cells = <0>;
......@@ -301,11 +300,11 @@ sound_multimedia1_codec: codec {
};
};
dai-link@2 {
dai-link@5 {
link-name = "MultiMedia2";
reg = <2>;
reg = <LPASS_DP_RX>;
cpu {
sound-dai = <&lpass_cpu 2>;
sound-dai = <&lpass_cpu LPASS_DP_RX>;
};
codec {
......@@ -782,7 +781,7 @@ secondary_mi2s: mi2s@1 {
qcom,playback-sd-lines = <0>;
};
hdmi-primary@0 {
hdmi@5 {
reg = <LPASS_DP_RX>;
};
};
......
......@@ -1850,9 +1850,9 @@ rpmhcc: clock-controller {
cpufreq_hw: cpufreq@18591000 {
compatible = "qcom,cpufreq-epss";
reg = <0 0x18591100 0 0x900>,
<0 0x18592100 0 0x900>,
<0 0x18593100 0 0x900>;
reg = <0 0x18591000 0 0x1000>,
<0 0x18592000 0 0x1000>,
<0 0x18593000 0 0x1000>;
clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
clock-names = "xo", "alternate";
#freq-domain-cells = <1>;
......
......@@ -654,9 +654,20 @@ a2noc: interconnect@1704000 {
compatible = "qcom,sdm660-a2noc";
reg = <0x01704000 0xc100>;
#interconnect-cells = <1>;
clock-names = "bus", "bus_a";
clock-names = "bus",
"bus_a",
"ipa",
"ufs_axi",
"aggre2_ufs_axi",
"aggre2_usb3_axi",
"cfg_noc_usb2_axi";
clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>,
<&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>;
<&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>,
<&rpmcc RPM_SMD_IPA_CLK>,
<&gcc GCC_UFS_AXI_CLK>,
<&gcc GCC_AGGRE2_UFS_AXI_CLK>,
<&gcc GCC_AGGRE2_USB3_AXI_CLK>,
<&gcc GCC_CFG_NOC_USB2_AXI_CLK>;
};
mnoc: interconnect@1745000 {
......
......@@ -128,23 +128,28 @@ camera_mem: memory@8bf00000 {
no-map;
};
wlan_msa_mem: memory@8c400000 {
reg = <0 0x8c400000 0 0x100000>;
ipa_fw_mem: memory@8c400000 {
reg = <0 0x8c400000 0 0x10000>;
no-map;
};
gpu_mem: memory@8c515000 {
reg = <0 0x8c515000 0 0x2000>;
ipa_gsi_mem: memory@8c410000 {
reg = <0 0x8c410000 0 0x5000>;
no-map;
};
ipa_fw_mem: memory@8c517000 {
reg = <0 0x8c517000 0 0x5a000>;
gpu_mem: memory@8c415000 {
reg = <0 0x8c415000 0 0x2000>;
no-map;
};
adsp_mem: memory@8c600000 {
reg = <0 0x8c600000 0 0x1a00000>;
adsp_mem: memory@8c500000 {
reg = <0 0x8c500000 0 0x1a00000>;
no-map;
};
wlan_msa_mem: memory@8df00000 {
reg = <0 0x8df00000 0 0x100000>;
no-map;
};
......
......@@ -16,6 +16,17 @@
#include "sdm850.dtsi"
#include "pm8998.dtsi"
/*
* Update following upstream (sdm845.dtsi) reserved
* memory mappings for firmware loading to succeed
* and enable the IPA device.
*/
/delete-node/ &ipa_fw_mem;
/delete-node/ &ipa_gsi_mem;
/delete-node/ &gpu_mem;
/delete-node/ &adsp_mem;
/delete-node/ &wlan_msa_mem;
/ {
model = "Lenovo Yoga C630";
compatible = "lenovo,yoga-c630", "qcom,sdm845";
......@@ -58,6 +69,29 @@ panel_in_edp: endpoint {
};
};
/* Reserved memory changes for IPA */
reserved-memory {
wlan_msa_mem: memory@8c400000 {
reg = <0 0x8c400000 0 0x100000>;
no-map;
};
gpu_mem: memory@8c515000 {
reg = <0 0x8c515000 0 0x2000>;
no-map;
};
ipa_fw_mem: memory@8c517000 {
reg = <0 0x8c517000 0 0x5a000>;
no-map;
};
adsp_mem: memory@8c600000 {
reg = <0 0x8c600000 0 0x1a00000>;
no-map;
};
};
sn65dsi86_refclk: sn65dsi86-refclk {
compatible = "fixed-clock";
#clock-cells = <0>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment