ide: unexport ide_set_xfer_rate() (v2)

In cmd64x, siimage and scc_pata drivers:
* don't set drive->init_speed as it should be already
  set by successful execution of ide_set_xfer_rate()
* use hwif->speedproc functions directly

Above changes allows removal of EXPORT_SYMBOL_GPL(ide_set_xfer_rate).

v2:
* updated for scc_pata driver
Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
parent c94964a4
...@@ -459,8 +459,6 @@ int ide_set_xfer_rate(ide_drive_t *drive, u8 rate) ...@@ -459,8 +459,6 @@ int ide_set_xfer_rate(ide_drive_t *drive, u8 rate)
return -1; return -1;
} }
EXPORT_SYMBOL_GPL(ide_set_xfer_rate);
static void ide_dump_opcode(ide_drive_t *drive) static void ide_dump_opcode(ide_drive_t *drive)
{ {
struct request *rq; struct request *rq;
......
...@@ -466,11 +466,8 @@ static int config_chipset_for_dma (ide_drive_t *drive) ...@@ -466,11 +466,8 @@ static int config_chipset_for_dma (ide_drive_t *drive)
if (!speed) if (!speed)
return 0; return 0;
if(ide_set_xfer_rate(drive, speed)) if (cmd64x_tune_chipset(drive, speed))
return 0; return 0;
if (!drive->init_speed)
drive->init_speed = speed;
return ide_dma_enable(drive); return ide_dma_enable(drive);
} }
......
...@@ -396,12 +396,9 @@ static int config_chipset_for_dma (ide_drive_t *drive) ...@@ -396,12 +396,9 @@ static int config_chipset_for_dma (ide_drive_t *drive)
if (!speed) if (!speed)
return 0; return 0;
if (ide_set_xfer_rate(drive, speed)) if (siimage_tune_chipset(drive, speed))
return 0; return 0;
if (!drive->init_speed)
drive->init_speed = speed;
return ide_dma_enable(drive); return ide_dma_enable(drive);
} }
......
...@@ -363,12 +363,9 @@ static int scc_config_chipset_for_dma(ide_drive_t *drive) ...@@ -363,12 +363,9 @@ static int scc_config_chipset_for_dma(ide_drive_t *drive)
if (!speed) if (!speed)
return 0; return 0;
if (ide_set_xfer_rate(drive, speed)) if (scc_tune_chipset(drive, speed))
return 0; return 0;
if (!drive->init_speed)
drive->init_speed = speed;
return ide_dma_enable(drive); return ide_dma_enable(drive);
} }
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment