Merge 6.1-rc6 into driver-core-next

We need the kernfs changes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

.mailmap

@@ -104,6 +104,7 @@ Christoph Hellwig <hch@lst.de>
 Colin Ian King <colin.i.king@gmail.com> <colin.king@canonical.com>
 Corey Minyard <minyard@acm.org>
 Damian Hobson-Garcia <dhobsong@igel.co.jp>
+Dan Carpenter <error27@gmail.com> <dan.carpenter@oracle.com>
 Daniel Borkmann <daniel@iogearbox.net> <danborkmann@googlemail.com>
 Daniel Borkmann <daniel@iogearbox.net> <danborkmann@iogearbox.net>
 Daniel Borkmann <daniel@iogearbox.net> <daniel.borkmann@tik.ee.ethz.ch>
@@ -353,7 +354,8 @@ Peter Oruba <peter@oruba.de>
 Pratyush Anand <pratyush.anand@gmail.com> <pratyush.anand@st.com>
 Praveen BP <praveenbp@ti.com>
 Punit Agrawal <punitagrawal@gmail.com> <punit.agrawal@arm.com>
-Qais Yousef <qsyousef@gmail.com> <qais.yousef@imgtec.com>
+Qais Yousef <qyousef@layalina.io> <qais.yousef@imgtec.com>
+Qais Yousef <qyousef@layalina.io> <qais.yousef@arm.com>
 Quentin Monnet <quentin@isovalent.com> <quentin.monnet@netronome.com>
 Quentin Perret <qperret@qperret.net> <quentin.perret@arm.com>
 Rafael J. Wysocki <rjw@rjwysocki.net> <rjw@sisk.pl>
@@ -414,6 +416,7 @@ TripleX Chung <xxx.phy@gmail.com> <triplex@zh-kernel.org>
 TripleX Chung <xxx.phy@gmail.com> <zhongyu@18mail.cn>
 Tsuneo Yoshioka <Tsuneo.Yoshioka@f-secure.com>
 Tycho Andersen <tycho@tycho.pizza> <tycho@tycho.ws>
+Tzung-Bi Shih <tzungbi@kernel.org> <tzungbi@google.com>
 Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
 Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
 Uwe Kleine-König <ukleinek@strlen.de>

CREDITS

@@ -918,6 +918,11 @@ S: Ottawa, Ontario
 S: K1N 6Z9
 S: CANADA
 
+N: Vivien Didelot
+E: vivien.didelot@gmail.com
+D: DSA framework and MV88E6XXX driver
+S: Montreal, Quebec, Canada
+
 N: Jeff Dike
 E: jdike@karaya.com
 W: http://user-mode-linux.sourceforge.net
@@ -2447,6 +2452,10 @@ S: 482 Shadowgraph Dr.
 S: San Jose, CA  95110
 S: USA
 
+N: Michal Marek
+E: michal.lkml@markovi.net
+D: Kbuild Maintainer 2009-2017
+
 N: Martin Mares
 E: mj@ucw.cz
 W: http://www.ucw.cz/~mj/

Documentation/ABI/testing/sysfs-kernel-mm-memory-tiers

@@ -10,7 +10,7 @@ Description:	A collection of all the memory tiers allocated.
 
 
 What:		/sys/devices/virtual/memory_tiering/memory_tierN/
-		/sys/devices/virtual/memory_tiering/memory_tierN/nodes
+		/sys/devices/virtual/memory_tiering/memory_tierN/nodelist
 Date:		August 2022
 Contact:	Linux memory management mailing list <linux-mm@kvack.org>
 Description:	Directory with details of a specific memory tier
@@ -21,5 +21,5 @@ Description:	Directory with details of a specific memory tier
 		A smaller value of N implies a higher (faster) memory tier in the
 		hierarchy.
 
-		nodes: NUMA nodes that are part of this memory tier.
+		nodelist: NUMA nodes that are part of this memory tier.
 

Documentation/admin-guide/acpi/index.rst

@@ -9,7 +9,6 @@ the Linux ACPI support.
    :maxdepth: 1
 
    initrd_table_override
-   dsdt-override
    ssdt-overlays
    cppc_sysfs
    fan_performance_states

Documentation/admin-guide/device-mapper/verity.rst

@@ -141,6 +141,10 @@ root_hash_sig_key_desc <key_description>
     also gain new certificates at run time if they are signed by a certificate
     already in the secondary trusted keyring.
 
+try_verify_in_tasklet
+    If verity hashes are in cache, verify data blocks in kernel tasklet instead
+    of workqueue. This option can reduce IO latency.
+
 Theory of operation
 ===================
 

Documentation/admin-guide/media/vivid.rst

@@ -1318,7 +1318,7 @@ instance. This setup would require the following commands:
 	$ v4l2-ctl -d2 -i2
 	$ v4l2-ctl -d2 -c horizontal_movement=4
 	$ v4l2-ctl -d1 --overlay=1
-	$ v4l2-ctl -d1 -c loop_video=1
+	$ v4l2-ctl -d0 -c loop_video=1
 	$ v4l2-ctl -d2 --stream-mmap --overlay=1
 
 And from another console:

Documentation/arm64/booting.rst

@@ -340,6 +340,14 @@ Before jumping into the kernel, the following conditions must be met:
     - SMCR_EL2.LEN must be initialised to the same value for all CPUs the
       kernel will execute on.
 
+    - HWFGRTR_EL2.nTPIDR2_EL0 (bit 55) must be initialised to 0b01.
+
+    - HWFGWTR_EL2.nTPIDR2_EL0 (bit 55) must be initialised to 0b01.
+
+    - HWFGRTR_EL2.nSMPRI_EL1 (bit 54) must be initialised to 0b01.
+
+    - HWFGWTR_EL2.nSMPRI_EL1 (bit 54) must be initialised to 0b01.
+
   For CPUs with the Scalable Matrix Extension FA64 feature (FEAT_SME_FA64)
 
   - If EL3 is present:

Documentation/arm64/cpu-feature-registers.rst

@@ -92,7 +92,7 @@ operation if the source belongs to the supported system register space.
 
 The infrastructure emulates only the following system register space::
 
-	Op0=3, Op1=0, CRn=0, CRm=0,4,5,6,7
+	Op0=3, Op1=0, CRn=0, CRm=0,2,3,4,5,6,7
 
 (See Table C5-6 'System instruction encodings for non-Debug System
 register accesses' in ARMv8 ARM DDI 0487A.h, for the list of
@@ -293,6 +293,42 @@ infrastructure:
      | WFXT                         | [3-0]   |    y    |
      +------------------------------+---------+---------+
 
+  10) MVFR0_EL1 - AArch32 Media and VFP Feature Register 0
+
+     +------------------------------+---------+---------+
+     | Name                         |  bits   | visible |
+     +------------------------------+---------+---------+
+     | FPDP                         | [11-8]  |    y    |
+     +------------------------------+---------+---------+
+
+  11) MVFR1_EL1 - AArch32 Media and VFP Feature Register 1
+
+     +------------------------------+---------+---------+
+     | Name                         |  bits   | visible |
+     +------------------------------+---------+---------+
+     | SIMDFMAC                     | [31-28] |    y    |
+     +------------------------------+---------+---------+
+     | SIMDSP                       | [19-16] |    y    |
+     +------------------------------+---------+---------+
+     | SIMDInt                      | [15-12] |    y    |
+     +------------------------------+---------+---------+
+     | SIMDLS                       | [11-8]  |    y    |
+     +------------------------------+---------+---------+
+
+  12) ID_ISAR5_EL1 - AArch32 Instruction Set Attribute Register 5
+
+     +------------------------------+---------+---------+
+     | Name                         |  bits   | visible |
+     +------------------------------+---------+---------+
+     | CRC32                        | [19-16] |    y    |
+     +------------------------------+---------+---------+
+     | SHA2                         | [15-12] |    y    |
+     +------------------------------+---------+---------+
+     | SHA1                         | [11-8]  |    y    |
+     +------------------------------+---------+---------+
+     | AES                          | [7-4]   |    y    |
+     +------------------------------+---------+---------+
+
 
 Appendix I: Example
 -------------------

Documentation/block/ublk.rst

@@ -144,6 +144,42 @@ managing and controlling ublk devices with help of several control commands:
   For retrieving device info via ``ublksrv_ctrl_dev_info``. It is the server's
   responsibility to save IO target specific info in userspace.
 
+- ``UBLK_CMD_START_USER_RECOVERY``
+
+  This command is valid if ``UBLK_F_USER_RECOVERY`` feature is enabled. This
+  command is accepted after the old process has exited, ublk device is quiesced
+  and ``/dev/ublkc*`` is released. User should send this command before he starts
+  a new process which re-opens ``/dev/ublkc*``. When this command returns, the
+  ublk device is ready for the new process.
+
+- ``UBLK_CMD_END_USER_RECOVERY``
+
+  This command is valid if ``UBLK_F_USER_RECOVERY`` feature is enabled. This
+  command is accepted after ublk device is quiesced and a new process has
+  opened ``/dev/ublkc*`` and get all ublk queues be ready. When this command
+  returns, ublk device is unquiesced and new I/O requests are passed to the
+  new process.
+
+- user recovery feature description
+
+  Two new features are added for user recovery: ``UBLK_F_USER_RECOVERY`` and
+  ``UBLK_F_USER_RECOVERY_REISSUE``.
+
+  With ``UBLK_F_USER_RECOVERY`` set, after one ubq_daemon(ublk server's io
+  handler) is dying, ublk does not delete ``/dev/ublkb*`` during the whole
+  recovery stage and ublk device ID is kept. It is ublk server's
+  responsibility to recover the device context by its own knowledge.
+  Requests which have not been issued to userspace are requeued. Requests
+  which have been issued to userspace are aborted.
+
+  With ``UBLK_F_USER_RECOVERY_REISSUE`` set, after one ubq_daemon(ublk
+  server's io handler) is dying, contrary to ``UBLK_F_USER_RECOVERY``,
+  requests which have been issued to userspace are requeued and will be
+  re-issued to the new process after handling ``UBLK_CMD_END_USER_RECOVERY``.
+  ``UBLK_F_USER_RECOVERY_REISSUE`` is designed for backends who tolerate
+  double-write since the driver may issue the same I/O request twice. It
+  might be useful to a read-only FS or a VM backend.
+
 Data plane
 ----------
 

Documentation/core-api/kernel-api.rst

@@ -118,6 +118,12 @@ Text Searching
 CRC and Math Functions in Linux
 ===============================
 
+Arithmetic Overflow Checking
+----------------------------
+
+.. kernel-doc:: include/linux/overflow.h
+   :internal:
+
 CRC Functions
 -------------
 

Documentation/dev-tools/kmsan.rst

@@ -67,6 +67,7 @@ uninitialized in the local variable, as well as the stack where the value was
 copied to another memory location before use.
 
 A use of uninitialized value ``v`` is reported by KMSAN in the following cases:
+
  - in a condition, e.g. ``if (v) { ... }``;
  - in an indexing or pointer dereferencing, e.g. ``array[v]`` or ``*v``;
  - when it is copied to userspace or hardware, e.g. ``copy_to_user(..., &v, ...)``;

Documentation/devicetree/bindings/hwlock/qcom-hwspinlock.yaml

@@ -15,9 +15,22 @@ description:
 
 properties:
   compatible:
-    enum:
-      - qcom,sfpb-mutex
-      - qcom,tcsr-mutex
+    oneOf:
+      - enum:
+          - qcom,sfpb-mutex
+          - qcom,tcsr-mutex
+      - items:
+          - enum:
+              - qcom,apq8084-tcsr-mutex
+              - qcom,ipq6018-tcsr-mutex
+              - qcom,msm8226-tcsr-mutex
+              - qcom,msm8994-tcsr-mutex
+          - const: qcom,tcsr-mutex
+      - items:
+          - enum:
+              - qcom,msm8974-tcsr-mutex
+          - const: qcom,tcsr-mutex
+          - const: syscon
 
   reg:
     maxItems: 1
@@ -34,9 +47,9 @@ additionalProperties: false
 
 examples:
   - |
-        tcsr_mutex: hwlock@1f40000 {
-                compatible = "qcom,tcsr-mutex";
-                reg = <0x01f40000 0x40000>;
-                #hwlock-cells = <1>;
-        };
+    hwlock@1f40000 {
+        compatible = "qcom,tcsr-mutex";
+        reg = <0x01f40000 0x40000>;
+        #hwlock-cells = <1>;
+    };
 ...

Documentation/devicetree/bindings/input/goodix,gt7375p.yaml

@@ -16,8 +16,11 @@ description:
 
 properties:
   compatible:
-    items:
+    oneOf:
       - const: goodix,gt7375p
+      - items:
+          - const: goodix,gt7986u
+          - const: goodix,gt7375p
 
   reg:
     enum:

Documentation/devicetree/bindings/media/i2c/dongwoon,dw9714.txt

-Dongwoon Anatech DW9714 camera voice coil lens driver
-
-DW9174 is a 10-bit DAC with current sink capability. It is intended
-for driving voice coil lenses in camera modules.
-
-Mandatory properties:
-
-- compatible: "dongwoon,dw9714"
-- reg: I²C slave address

Documentation/devicetree/bindings/media/i2c/dongwoon,dw9714.yaml

+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/dongwoon,dw9714.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dongwoon Anatech DW9714 camera voice coil lens driver
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description:
+  DW9174 is a 10-bit DAC with current sink capability. It is intended for
+  driving voice coil lenses in camera modules.
+
+properties:
+  compatible:
+    const: dongwoon,dw9714
+
+  reg:
+    maxItems: 1
+
+  powerdown-gpios:
+    description:
+      XSD pin for shutdown (active low)
+
+  vcc-supply:
+    description: VDD power supply
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        camera-lens@c {
+            compatible = "dongwoon,dw9714";
+            reg = <0x0c>;
+            vcc-supply = <&reg_csi_1v8>;
+        };
+    };

Documentation/devicetree/bindings/net/engleder,tsnep.yaml

@@ -47,7 +47,7 @@ properties:
 
   nvmem-cells: true
 
-  nvmem-cells-names: true
+  nvmem-cell-names: true
 
   phy-connection-type:
     enum:

Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml

@@ -8,7 +8,6 @@ title: Samsung S3FWRN5 NCI NFC Controller
 
 maintainers:
   - Krzysztof Kozlowski <krzk@kernel.org>
-  - Krzysztof Opasiak <k.opasiak@samsung.com>
 
 properties:
   compatible:

Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml

@@ -274,10 +274,6 @@ patternProperties:
           slew-rate:
             enum: [0, 1]
 
-          output-enable:
-            description:
-              This will internally disable the tri-state for MIO pins.
-
           drive-strength:
             description:
               Selects the drive strength for MIO pins, in mA.

Documentation/devicetree/bindings/power/fsl,imx-gpcv2.yaml

@@ -81,6 +81,9 @@ properties:
 
           power-supply: true
 
+          power-domains:
+            maxItems: 1
+
           resets:
             description: |
               A number of phandles to resets that need to be asserted during

Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml

@@ -8,7 +8,7 @@ title: Audio codec controlled by ChromeOS EC
 
 maintainers:
   - Cheng-Yi Chiang <cychiang@chromium.org>
-  - Tzung-Bi Shih <tzungbi@google.com>
+  - Tzung-Bi Shih <tzungbi@kernel.org>
 
 description: |
   Google's ChromeOS EC codec is a digital mic codec provided by the

Documentation/devicetree/bindings/sound/realtek,rt1015p.yaml

@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Realtek rt1015p codec devicetree bindings
 
 maintainers:
-  - Tzung-Bi Shih <tzungbi@google.com>
+  - Tzung-Bi Shih <tzungbi@kernel.org>
 
 description: |
   Rt1015p is a rt1015 variant which does not support I2C and

Documentation/driver-api/basics.rst

@@ -107,9 +107,6 @@ Kernel utility functions
 .. kernel-doc:: kernel/panic.c
    :export:
 
-.. kernel-doc:: include/linux/overflow.h
-   :internal:
-
 Device Resource Management
 --------------------------
 

Documentation/driver-api/driver-model/devres.rst

@@ -279,6 +279,7 @@ GPIO
   devm_gpio_request_one()
 
 I2C
+  devm_i2c_add_adapter()
   devm_i2c_new_dummy_device()
 
 IIO

Documentation/driver-api/media/mc-core.rst

@@ -214,18 +214,29 @@ Link properties can be modified at runtime by calling
 Pipelines and media streams
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
+A media stream is a stream of pixels or metadata originating from one or more
+source devices (such as a sensors) and flowing through media entity pads
+towards the final sinks. The stream can be modified on the route by the
+devices (e.g. scaling or pixel format conversions), or it can be split into
+multiple branches, or multiple branches can be merged.
+
+A media pipeline is a set of media streams which are interdependent. This
+interdependency can be caused by the hardware (e.g. configuration of a second
+stream cannot be changed if the first stream has been enabled) or by the driver
+due to the software design. Most commonly a media pipeline consists of a single
+stream which does not branch.
+
 When starting streaming, drivers must notify all entities in the pipeline to
 prevent link states from being modified during streaming by calling
 :c:func:`media_pipeline_start()`.
 
-The function will mark all entities connected to the given entity through
-enabled links, either directly or indirectly, as streaming.
+The function will mark all the pads which are part of the pipeline as streaming.
 
 The struct media_pipeline instance pointed to by
-the pipe argument will be stored in every entity in the pipeline.
+the pipe argument will be stored in every pad in the pipeline.
 Drivers should embed the struct media_pipeline
 in higher-level pipeline structures and can then access the
-pipeline through the struct media_entity
+pipeline through the struct media_pad
 pipe field.
 
 Calls to :c:func:`media_pipeline_start()` can be nested.

Documentation/driver-api/miscellaneous.rst

@@ -16,12 +16,11 @@ Parallel Port Devices
 16x50 UART Driver
 =================
 
-.. kernel-doc:: drivers/tty/serial/serial_core.c
-   :export:
-
 .. kernel-doc:: drivers/tty/serial/8250/8250_core.c
    :export:
 
+See serial/driver.rst for related APIs.
+
 Pulse-Width Modulation (PWM)
 ============================
 

Documentation/hwmon/corsair-psu.rst

@@ -19,6 +19,8 @@ Supported devices:
 
   Corsair HX1200i
 
+  Corsair HX1500i
+
   Corsair RM550i
 
   Corsair RM650i

Documentation/kbuild/reproducible-builds.rst

@@ -119,6 +119,16 @@ To avoid this, you can make the vDSO different for different
 kernel versions by including an arbitrary string of "salt" in it.
 This is specified by the Kconfig symbol ``CONFIG_BUILD_SALT``.
 
+Git
+---
+
+Uncommitted changes or different commit ids in git can also lead
+to different compilation results. For example, after executing
+``git reset HEAD^``, even if the code is the same, the
+``include/config/kernel.release`` generated during compilation
+will be different, which will eventually lead to binary differences.
+See ``scripts/setlocalversion`` for details.
+
 .. _KBUILD_BUILD_TIMESTAMP: kbuild.html#kbuild-build-timestamp
 .. _KBUILD_BUILD_USER and KBUILD_BUILD_HOST: kbuild.html#kbuild-build-user-kbuild-build-host
 .. _KCFLAGS: kbuild.html#kcflags

Documentation/kernel-hacking/hacking.rst

@@ -120,7 +120,7 @@ You can tell you are in a softirq (or tasklet) using the
 .. warning::
 
     Beware that this will return a false positive if a
-    :ref:`botton half lock <local_bh_disable>` is held.
+    :ref:`bottom half lock <local_bh_disable>` is held.
 
 Some Basic Rules
 ================

Documentation/process/2.Process.rst

@@ -126,17 +126,10 @@ than one development cycle past their initial release. So, for example, the
 5.2.21 was the final stable update of the 5.2 release.
 
 Some kernels are designated "long term" kernels; they will receive support
-for a longer period.  As of this writing, the current long term kernels
-and their maintainers are:
-
-	======  ================================	=======================
-	3.16	Ben Hutchings				(very long-term kernel)
-	4.4	Greg Kroah-Hartman & Sasha Levin	(very long-term kernel)
-	4.9	Greg Kroah-Hartman & Sasha Levin
-	4.14	Greg Kroah-Hartman & Sasha Levin
-	4.19	Greg Kroah-Hartman & Sasha Levin
-	5.4	Greg Kroah-Hartman & Sasha Levin
-	======  ================================	=======================
+for a longer period.  Please refer to the following link for the list of active
+long term kernel versions and their maintainers:
+
+	https://www.kernel.org/category/releases.html
 
 The selection of a kernel for long-term support is purely a matter of a
 maintainer having the need and the time to maintain that release.  There

Documentation/process/code-of-conduct-interpretation.rst

@@ -51,7 +51,7 @@ the Technical Advisory Board (TAB) or other maintainers if you're
 uncertain how to handle situations that come up.  It will not be
 considered a violation report unless you want it to be.  If you are
 uncertain about approaching the TAB or any other maintainers, please
-reach out to our conflict mediator, Joanna Lee <joanna.lee@gesmer.com>.
+reach out to our conflict mediator, Joanna Lee <jlee@linuxfoundation.org>.
 
 In the end, "be kind to each other" is really what the end goal is for
 everybody.  We know everyone is human and we all fail at times, but the

Documentation/process/howto.rst

@@ -36,7 +36,7 @@ experience, the following books are good for, if anything, reference:
  - "C:  A Reference Manual" by Harbison and Steele [Prentice Hall]
 
 The kernel is written using GNU C and the GNU toolchain.  While it
-adheres to the ISO C89 standard, it uses a number of extensions that are
+adheres to the ISO C11 standard, it uses a number of extensions that are
 not featured in the standard.  The kernel is a freestanding C
 environment, with no reliance on the standard C library, so some
 portions of the C standard are not supported.  Arbitrary long long

Documentation/process/maintainer-netdev.rst

@@ -319,3 +319,13 @@ unpatched tree to confirm infrastructure didn't mangle it.
 Finally, go back and read
 :ref:`Documentation/process/submitting-patches.rst <submittingpatches>`
 to be sure you are not repeating some common mistake documented there.
+
+My company uses peer feedback in employee performance reviews. Can I ask netdev maintainers for feedback?
+---------------------------------------------------------------------------------------------------------
+
+Yes, especially if you spend significant amount of time reviewing code
+and go out of your way to improve shared infrastructure.
+
+The feedback must be requested by you, the contributor, and will always
+be shared with you (even if you request for it to be submitted to your
+manager).

Documentation/trace/histogram.rst

@@ -39,7 +39,7 @@ Documentation written by Tom Zanussi
   will use the event's kernel stacktrace as the key.  The keywords
   'keys' or 'key' can be used to specify keys, and the keywords
   'values', 'vals', or 'val' can be used to specify values.  Compound
-  keys consisting of up to two fields can be specified by the 'keys'
+  keys consisting of up to three fields can be specified by the 'keys'
   keyword.  Hashing a compound key produces a unique entry in the
   table for each unique combination of component keys, and can be
   useful for providing more fine-grained summaries of event data.

Documentation/translations/it_IT/process/howto.rst

@@ -44,7 +44,7 @@ altro, utili riferimenti:
 - "C:  A Reference Manual" di Harbison and Steele [Prentice Hall]
 
 Il kernel è stato scritto usando GNU C e la toolchain GNU.
-Sebbene si attenga allo standard ISO C89, esso utilizza una serie di
+Sebbene si attenga allo standard ISO C11, esso utilizza una serie di
 estensioni che non sono previste in questo standard. Il kernel è un
 ambiente C indipendente, che non ha alcuna dipendenza dalle librerie
 C standard, così alcune parti del C standard non sono supportate.

Documentation/translations/ja_JP/howto.rst

@@ -65,7 +65,7 @@ Linux カーネル開発のやり方
  - 『新・詳説 C 言語 H&S リファレンス』 (サミュエル P ハービソン/ガイ L スティール共著 斉藤 信男監訳)[ソフトバンク]
 
 カーネルは GNU C と GNU ツールチェインを使って書かれています。カーネル
-は ISO C89 仕様に準拠して書く一方で、標準には無い言語拡張を多く使って
+は ISO C11 仕様に準拠して書く一方で、標準には無い言語拡張を多く使って
 います。カーネルは標準 C ライブラリに依存しない、C 言語非依存環境です。
 そのため、C の標準の中で使えないものもあります。特に任意の long long
 の除算や浮動小数点は使えません。カーネルがツールチェインや C 言語拡張

Documentation/translations/ko_KR/howto.rst

@@ -62,7 +62,7 @@ Documentation/process/howto.rst
  - "Practical C Programming" by Steve Oualline [O'Reilly]
  - "C:  A Reference Manual" by Harbison and Steele [Prentice Hall]
 
-커널은 GNU C와 GNU 툴체인을 사용하여 작성되었다. 이 툴들은 ISO C89 표준을
+커널은 GNU C와 GNU 툴체인을 사용하여 작성되었다. 이 툴들은 ISO C11 표준을
 따르는 반면 표준에 있지 않은 많은 확장기능도 가지고 있다. 커널은 표준 C
 라이브러리와는 관계없이 freestanding C 환경이어서 C 표준의 일부는
 지원되지 않는다. 임의의 long long 나누기나 floating point는 지원되지 않는다.

Documentation/translations/zh_CN/process/howto.rst

@@ -45,7 +45,7 @@ Linux内核大部分是由C语言写成的，一些体系结构相关的代码
  - "C:  A Reference Manual" by Harbison and Steele [Prentice Hall]
    《C语言参考手册（原书第5版）》（邱仲潘 等译）[机械工业出版社]
 
-Linux内核使用GNU C和GNU工具链开发。虽然它遵循ISO C89标准，但也用到了一些
+Linux内核使用GNU C和GNU工具链开发。虽然它遵循ISO C11标准，但也用到了一些
 标准中没有定义的扩展。内核是自给自足的C环境，不依赖于标准C库的支持，所以
 并不支持C标准中的部分定义。比如long long类型的大数除法和浮点运算就不允许
 使用。有时候确实很难弄清楚内核对工具链的要求和它所使用的扩展，不幸的是目

Documentation/translations/zh_TW/process/howto.rst

@@ -48,7 +48,7 @@ Linux內核大部分是由C語言寫成的，一些體系結構相關的代碼
  - "C:  A Reference Manual" by Harbison and Steele [Prentice Hall]
    《C語言參考手冊（原書第5版）》（邱仲潘 等譯）[機械工業出版社]
 
-Linux內核使用GNU C和GNU工具鏈開發。雖然它遵循ISO C89標準，但也用到了一些
+Linux內核使用GNU C和GNU工具鏈開發。雖然它遵循ISO C11標準，但也用到了一些
 標準中沒有定義的擴展。內核是自給自足的C環境，不依賴於標準C庫的支持，所以
 並不支持C標準中的部分定義。比如long long類型的大數除法和浮點運算就不允許
 使用。有時候確實很難弄清楚內核對工具鏈的要求和它所使用的擴展，不幸的是目

Documentation/userspace-api/media/cec.h.rst.exceptions

@@ -239,6 +239,7 @@ ignore define CEC_OP_FEAT_DEV_HAS_DECK_CONTROL
 ignore define CEC_OP_FEAT_DEV_HAS_SET_AUDIO_RATE
 ignore define CEC_OP_FEAT_DEV_SINK_HAS_ARC_TX
 ignore define CEC_OP_FEAT_DEV_SOURCE_HAS_ARC_RX
+ignore define CEC_OP_FEAT_DEV_HAS_SET_AUDIO_VOLUME_LEVEL
 
 ignore define CEC_MSG_GIVE_FEATURES
 
@@ -487,6 +488,7 @@ ignore define CEC_OP_SYS_AUD_STATUS_ON
 
 ignore define CEC_MSG_SYSTEM_AUDIO_MODE_REQUEST
 ignore define CEC_MSG_SYSTEM_AUDIO_MODE_STATUS
+ignore define CEC_MSG_SET_AUDIO_VOLUME_LEVEL
 
 ignore define CEC_OP_AUD_FMT_ID_CEA861
 ignore define CEC_OP_AUD_FMT_ID_CEA861_CXT

Documentation/userspace-api/media/v4l/libv4l-introduction.rst

@@ -136,9 +136,9 @@ V4L2 functions
 
    operates like the :c:func:`read()` function.
 
-.. c:function:: void v4l2_mmap(void *start, size_t length, int prot, int flags, int fd, int64_t offset);
+.. c:function:: void *v4l2_mmap(void *start, size_t length, int prot, int flags, int fd, int64_t offset);
 
-   operates like the :c:func:`munmap()` function.
+   operates like the :c:func:`mmap()` function.
 
 .. c:function:: int v4l2_munmap(void *_start, size_t length);
 

Documentation/virt/kvm/devices/vm.rst

@@ -215,6 +215,7 @@ KVM_S390_VM_TOD_EXT).
 :Parameters: address of a buffer in user space to store the data (u8) to
 :Returns:   -EFAULT if the given address is not accessible from kernel space;
 	    -EINVAL if setting the TOD clock extension to != 0 is not supported
+	    -EOPNOTSUPP for a PV guest (TOD managed by the ultravisor)
 
 3.2. ATTRIBUTE: KVM_S390_VM_TOD_LOW
 -----------------------------------
@@ -224,6 +225,7 @@ the POP (u64).
 
 :Parameters: address of a buffer in user space to store the data (u64) to
 :Returns:    -EFAULT if the given address is not accessible from kernel space
+	     -EOPNOTSUPP for a PV guest (TOD managed by the ultravisor)
 
 3.3. ATTRIBUTE: KVM_S390_VM_TOD_EXT
 -----------------------------------
@@ -237,6 +239,7 @@ it, it is stored as 0 and not allowed to be set to a value != 0.
 	     (kvm_s390_vm_tod_clock) to
 :Returns:   -EFAULT if the given address is not accessible from kernel space;
 	    -EINVAL if setting the TOD clock extension to != 0 is not supported
+	    -EOPNOTSUPP for a PV guest (TOD managed by the ultravisor)
 
 4. GROUP: KVM_S390_VM_CRYPTO
 ============================

Makefile

@@ -2,7 +2,7 @@
 VERSION = 6
 PATCHLEVEL = 1
 SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc6
 NAME = Hurr durr I'ma ninja sloth
 
 # *DOCUMENTATION*
@@ -1218,7 +1218,7 @@ quiet_cmd_ar_vmlinux.a = AR      $@
       cmd_ar_vmlinux.a = \
 	rm -f $@; \
 	$(AR) cDPrST $@ $(KBUILD_VMLINUX_OBJS); \
-	$(AR) mPiT $$($(AR) t $@ | head -n1) $@ $$($(AR) t $@ | grep -F --file=$(srctree)/scripts/head-object-list.txt)
+	$(AR) mPiT $$($(AR) t $@ | sed -n 1p) $@ $$($(AR) t $@ | grep -F -f $(srctree)/scripts/head-object-list.txt)
 
 targets += vmlinux.a
 vmlinux.a: $(KBUILD_VMLINUX_OBJS) scripts/head-object-list.txt autoksyms_recursive FORCE

arch/arc/boot/dts/axc003.dtsi

@@ -103,11 +103,11 @@ ethernet@18000 {
 			dma-coherent;
 		};
 
-		ehci@40000 {
+		usb@40000 {
 			dma-coherent;
 		};
 
-		ohci@60000 {
+		usb@60000 {
 			dma-coherent;
 		};
 

arch/arc/boot/dts/axc003_idu.dtsi

@@ -110,11 +110,11 @@ ethernet@18000 {
 			dma-coherent;
 		};
 
-		ehci@40000 {
+		usb@40000 {
 			dma-coherent;
 		};
 
-		ohci@60000 {
+		usb@60000 {
 			dma-coherent;
 		};
 

arch/arc/boot/dts/axs10x_mb.dtsi

@@ -87,13 +87,13 @@ gmac: ethernet@18000 {
 			mac-address = [00 00 00 00 00 00]; /* Filled in by U-Boot */
 		};
 
-		ehci@40000 {
+		usb@40000 {
 			compatible = "generic-ehci";
 			reg = < 0x40000 0x100 >;
 			interrupts = < 8 >;
 		};
 
-		ohci@60000 {
+		usb@60000 {
 			compatible = "generic-ohci";
 			reg = < 0x60000 0x100 >;
 			interrupts = < 8 >;

arch/arc/boot/dts/hsdk.dts

@@ -234,7 +234,7 @@ phy0: ethernet-phy@0 { /* Micrel KSZ9031 */
 			};
 		};
 
-		ohci@60000 {
+		usb@60000 {
 			compatible = "snps,hsdk-v1.0-ohci", "generic-ohci";
 			reg = <0x60000 0x100>;
 			interrupts = <15>;
@@ -242,7 +242,7 @@ ohci@60000 {
 			dma-coherent;
 		};
 
-		ehci@40000 {
+		usb@40000 {
 			compatible = "snps,hsdk-v1.0-ehci", "generic-ehci";
 			reg = <0x40000 0x100>;
 			interrupts = <15>;

arch/arc/boot/dts/vdk_axs10x_mb.dtsi

@@ -46,7 +46,7 @@ ethernet@18000 {
 			clock-names = "stmmaceth";
 		};
 
-		ehci@40000 {
+		usb@40000 {
 			compatible = "generic-ehci";
 			reg = < 0x40000 0x100 >;
 			interrupts = < 8 >;

arch/arc/configs/axs101_defconfig

@@ -35,9 +35,6 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_IPV6 is not set
 CONFIG_DEVTMPFS=y
 # CONFIG_STANDALONE is not set
@@ -99,7 +96,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_STRIP_ASM_SYMS=y
 CONFIG_SOFTLOCKUP_DETECTOR=y
 CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10

arch/arc/configs/axs103_defconfig

@@ -34,9 +34,6 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_IPV6 is not set
 CONFIG_DEVTMPFS=y
 # CONFIG_STANDALONE is not set
@@ -97,7 +94,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_STRIP_ASM_SYMS=y
 CONFIG_SOFTLOCKUP_DETECTOR=y
 CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10

arch/arc/configs/axs103_smp_defconfig

@@ -35,9 +35,6 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_IPV6 is not set
 CONFIG_DEVTMPFS=y
 # CONFIG_STANDALONE is not set
@@ -100,7 +97,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_STRIP_ASM_SYMS=y
 CONFIG_SOFTLOCKUP_DETECTOR=y
 CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10

arch/arc/configs/haps_hs_defconfig

@@ -59,6 +59,5 @@ CONFIG_EXT2_FS_XATTR=y
 CONFIG_TMPFS=y
 # CONFIG_MISC_FILESYSTEMS is not set
 CONFIG_NFS_FS=y
-# CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_PREEMPT is not set

arch/arc/configs/haps_hs_smp_defconfig

@@ -59,6 +59,5 @@ CONFIG_EXT2_FS_XATTR=y
 CONFIG_TMPFS=y
 # CONFIG_MISC_FILESYSTEMS is not set
 CONFIG_NFS_FS=y
-# CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_SOFTLOCKUP_DETECTOR=y
 # CONFIG_DEBUG_PREEMPT is not set

arch/arc/configs/hsdk_defconfig

@@ -85,7 +85,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_STRIP_ASM_SYMS=y
 CONFIG_SOFTLOCKUP_DETECTOR=y
 CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10

arch/arc/configs/nsim_700_defconfig

@@ -56,5 +56,4 @@ CONFIG_EXT2_FS_XATTR=y
 CONFIG_TMPFS=y
 # CONFIG_MISC_FILESYSTEMS is not set
 CONFIG_NFS_FS=y
-# CONFIG_ENABLE_MUST_CHECK is not set
 # CONFIG_DEBUG_PREEMPT is not set

arch/arc/configs/nsimosci_defconfig

@@ -65,4 +65,3 @@ CONFIG_TMPFS=y
 # CONFIG_MISC_FILESYSTEMS is not set
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3_ACL=y
-# CONFIG_ENABLE_MUST_CHECK is not set

arch/arc/configs/nsimosci_hs_defconfig

@@ -63,4 +63,3 @@ CONFIG_TMPFS=y
 # CONFIG_MISC_FILESYSTEMS is not set
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3_ACL=y
-# CONFIG_ENABLE_MUST_CHECK is not set

arch/arc/configs/nsimosci_hs_smp_defconfig

@@ -26,9 +26,6 @@ CONFIG_UNIX=y
 CONFIG_UNIX_DIAG=y
 CONFIG_NET_KEY=y
 CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_IPV6 is not set
 # CONFIG_WIRELESS is not set
 CONFIG_DEVTMPFS=y
@@ -37,7 +34,6 @@ CONFIG_DEVTMPFS=y
 # CONFIG_BLK_DEV is not set
 CONFIG_NETDEVICES=y
 # CONFIG_NET_VENDOR_ARC is not set
-# CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
 CONFIG_EZCHIP_NPS_MANAGEMENT_ENET=y
 # CONFIG_NET_VENDOR_INTEL is not set
@@ -74,5 +70,5 @@ CONFIG_TMPFS=y
 # CONFIG_MISC_FILESYSTEMS is not set
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3_ACL=y
-# CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FTRACE=y
+# CONFIG_NET_VENDOR_CADENCE is not set

arch/arc/configs/tb10x_defconfig

@@ -35,15 +35,11 @@ CONFIG_PACKET=y
 CONFIG_UNIX=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_DIAG is not set
 # CONFIG_IPV6 is not set
 # CONFIG_WIRELESS is not set
 CONFIG_DEVTMPFS=y
 CONFIG_NETDEVICES=y
-# CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
 # CONFIG_NET_VENDOR_INTEL is not set
 # CONFIG_NET_VENDOR_MARVELL is not set
@@ -94,12 +90,11 @@ CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_STRIP_ASM_SYMS=y
 CONFIG_DEBUG_FS=y
 CONFIG_HEADERS_INSTALL=y
-CONFIG_HEADERS_CHECK=y
 CONFIG_DEBUG_SECTION_MISMATCH=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_MEMORY_INIT=y
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DETECT_HUNG_TASK=y
 CONFIG_SCHEDSTATS=y
-CONFIG_TIMER_STATS=y
 # CONFIG_CRYPTO_HW is not set
+# CONFIG_NET_VENDOR_CADENCE is not set

arch/arc/configs/vdk_hs38_defconfig

@@ -58,8 +58,6 @@ CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_HW_RANDOM is not set
 # CONFIG_HWMON is not set
 CONFIG_FB=y
-CONFIG_ARCPGU_RGB888=y
-CONFIG_ARCPGU_DISPTYPE=0
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
@@ -87,7 +85,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_STRIP_ASM_SYMS=y
 CONFIG_DEBUG_SHIRQ=y
 CONFIG_SOFTLOCKUP_DETECTOR=y

arch/arc/configs/vdk_hs38_smp_defconfig

@@ -91,7 +91,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_STRIP_ASM_SYMS=y
 CONFIG_DEBUG_SHIRQ=y
 CONFIG_SOFTLOCKUP_DETECTOR=y

arch/arc/include/asm/bitops.h

@@ -82,7 +82,7 @@ static inline __attribute__ ((const)) int fls(unsigned int x)
 /*
  * __fls: Similar to fls, but zero based (0-31)
  */
-static inline __attribute__ ((const)) int __fls(unsigned long x)
+static inline __attribute__ ((const)) unsigned long __fls(unsigned long x)
 {
 	if (!x)
 		return 0;
@@ -131,7 +131,7 @@ static inline __attribute__ ((const)) int fls(unsigned int x)
 /*
  * __fls: Similar to fls, but zero based (0-31). Also 0 if no bit set
  */
-static inline __attribute__ ((const)) int __fls(unsigned long x)
+static inline __attribute__ ((const)) unsigned long __fls(unsigned long x)
 {
 	/* FLS insn has exactly same semantics as the API */
 	return	__builtin_arc_fls(x);

arch/arc/include/asm/entry-compact.h

@@ -21,7 +21,7 @@
  *      r25 contains the kernel current task ptr
  *  - Defined Stack Switching Macro to be reused in all intr/excp hdlrs
  *  - Shaved off 11 instructions from RESTORE_ALL_INT1 by using the
- *      address Write back load ld.ab instead of seperate ld/add instn
+ *      address Write back load ld.ab instead of separate ld/add instn
  *
  * Amit Bhor, Sameer Dhavale: Codito Technologies 2004
  */

arch/arc/include/asm/io.h

@@ -32,7 +32,7 @@ static inline void ioport_unmap(void __iomem *addr)
 {
 }
 
-extern void iounmap(const void __iomem *addr);
+extern void iounmap(const volatile void __iomem *addr);
 
 /*
  * io{read,write}{16,32}be() macros

arch/arc/include/asm/pgtable-levels.h

@@ -161,7 +161,7 @@
 #define pmd_pfn(pmd)		((pmd_val(pmd) & PAGE_MASK) >> PAGE_SHIFT)
 #define pmd_page(pmd)		virt_to_page(pmd_page_vaddr(pmd))
 #define set_pmd(pmdp, pmd)	(*(pmdp) = pmd)
-#define pmd_pgtable(pmd)	((pgtable_t) pmd_page_vaddr(pmd))
+#define pmd_pgtable(pmd)	((pgtable_t) pmd_page(pmd))
 
 /*
  * 4th level paging: pte

arch/arc/kernel/smp.c

@@ -385,7 +385,7 @@ irqreturn_t do_IPI(int irq, void *dev_id)
  * API called by platform code to hookup arch-common ISR to their IPI IRQ
  *
  * Note: If IPI is provided by platform (vs. say ARC MCIP), their intc setup/map
- * function needs to call call irq_set_percpu_devid() for IPI IRQ, otherwise
+ * function needs to call irq_set_percpu_devid() for IPI IRQ, otherwise
  * request_percpu_irq() below will fail
  */
 static DEFINE_PER_CPU(int, ipi_dev);

arch/arc/mm/cache.c

@@ -750,7 +750,7 @@ static inline void arc_slc_enable(void)
  *  -In SMP, if hardware caches are coherent
  *
  * There's a corollary case, where kernel READs from a userspace mapped page.
- * If the U-mapping is not congruent to to K-mapping, former needs flushing.
+ * If the U-mapping is not congruent to K-mapping, former needs flushing.
  */
 void flush_dcache_page(struct page *page)
 {
@@ -910,7 +910,7 @@ EXPORT_SYMBOL(flush_icache_range);
  * @vaddr is typically user vaddr (breakpoint) or kernel vaddr (vmalloc)
  *    However in one instance, when called by kprobe (for a breakpt in
  *    builtin kernel code) @vaddr will be paddr only, meaning CDU operation will
- *    use a paddr to index the cache (despite VIPT). This is fine since since a
+ *    use a paddr to index the cache (despite VIPT). This is fine since a
  *    builtin kernel page will not have any virtual mappings.
  *    kprobe on loadable module will be kernel vaddr.
  */

arch/arc/mm/ioremap.c

@@ -94,7 +94,7 @@ void __iomem *ioremap_prot(phys_addr_t paddr, unsigned long size,
 EXPORT_SYMBOL(ioremap_prot);
 
 
-void iounmap(const void __iomem *addr)
+void iounmap(const volatile void __iomem *addr)
 {
 	/* weird double cast to handle phys_addr_t > 32 bits */
 	if (arc_uncached_addr_space((phys_addr_t)(u32)addr))

arch/arm/boot/dts/imx6q-yapp4-crux.dts

@@ -33,6 +33,10 @@ &oled_1309 {
 	status = "okay";
 };
 
+&reg_pu {
+	regulator-always-on;
+};
+
 &reg_usb_h1_vbus {
 	status = "okay";
 };

arch/arm/boot/dts/imx6qdl-gw5910.dtsi

@@ -29,7 +29,7 @@ gpio-keys {
 
 		user-pb {
 			label = "user_pb";
-			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			gpios = <&gsc_gpio 2 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 

arch/arm/boot/dts/imx6qdl-gw5913.dtsi

@@ -26,7 +26,7 @@ gpio-keys {
 
 		user-pb {
 			label = "user_pb";
-			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			gpios = <&gsc_gpio 2 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 

arch/arm/boot/dts/imx6qp-yapp4-crux-plus.dts

@@ -33,6 +33,10 @@ &oled_1309 {
 	status = "okay";
 };
 
+&reg_pu {
+	regulator-always-on;
+};
+
 &reg_usb_h1_vbus {
 	status = "okay";
 };

arch/arm/boot/dts/imx7s.dtsi

@@ -1270,10 +1270,10 @@ dma_apbh: dma-apbh@33000000 {
 			clocks = <&clks IMX7D_NAND_USDHC_BUS_RAWNAND_CLK>;
 		};
 
-		gpmi: nand-controller@33002000{
+		gpmi: nand-controller@33002000 {
 			compatible = "fsl,imx7d-gpmi-nand";
 			#address-cells = <1>;
-			#size-cells = <1>;
+			#size-cells = <0>;
 			reg = <0x33002000 0x2000>, <0x33004000 0x4000>;
 			reg-names = "gpmi-nand", "bch";
 			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;

arch/arm/boot/dts/lan966x-pcb8291.dts

@@ -69,6 +69,12 @@ can0_b_pins:  can0-b-pins {
 		pins = "GPIO_35", "GPIO_36";
 		function = "can0_b";
 	};
+
+	sgpio_a_pins: sgpio-a-pins {
+		/* SCK, D0, D1, LD */
+		pins = "GPIO_32", "GPIO_33", "GPIO_34", "GPIO_35";
+		function = "sgpio_a";
+	};
 };
 
 &can0 {
@@ -118,6 +124,20 @@ &serdes {
 	status = "okay";
 };
 
+&sgpio {
+	pinctrl-0 = <&sgpio_a_pins>;
+	pinctrl-names = "default";
+	microchip,sgpio-port-ranges = <0 3>, <8 11>;
+	status = "okay";
+
+	gpio@0 {
+		ngpios = <64>;
+	};
+	gpio@1 {
+		ngpios = <64>;
+	};
+};
+
 &switch {
 	status = "okay";
 };

arch/arm/boot/dts/sama7g5-pinfunc.h

@@ -261,7 +261,7 @@
 #define PIN_PB2__FLEXCOM6_IO0		PINMUX_PIN(PIN_PB2, 2, 1)
 #define PIN_PB2__ADTRG			PINMUX_PIN(PIN_PB2, 3, 1)
 #define PIN_PB2__A20			PINMUX_PIN(PIN_PB2, 4, 1)
-#define PIN_PB2__FLEXCOM11_IO0		PINMUX_PIN(PIN_PB2, 6, 3)
+#define PIN_PB2__FLEXCOM11_IO1		PINMUX_PIN(PIN_PB2, 6, 3)
 #define PIN_PB3				35
 #define PIN_PB3__GPIO			PINMUX_PIN(PIN_PB3, 0, 0)
 #define PIN_PB3__RF1			PINMUX_PIN(PIN_PB3, 1, 1)

arch/arm/boot/dts/ste-href.dtsi

@@ -24,6 +24,14 @@ battery-thermal {
 			polling-delay = <0>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&bat_therm>;
+
+			trips {
+				battery-crit-hi {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 	};
 

arch/arm/boot/dts/ste-snowball.dts

@@ -28,6 +28,14 @@ battery-thermal {
 			polling-delay = <0>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&bat_therm>;
+
+			trips {
+				battery-crit-hi {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 	};
 

arch/arm/boot/dts/ste-ux500-samsung-codina-tmo.dts

@@ -44,6 +44,14 @@ battery-thermal {
 			polling-delay = <0>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&bat_therm>;
+
+			trips {
+				battery-crit-hi {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 	};
 

arch/arm/boot/dts/ste-ux500-samsung-codina.dts

@@ -57,6 +57,14 @@ battery-thermal {
 			polling-delay = <0>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&bat_therm>;
+
+			trips {
+				battery-crit-hi {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 	};
 

arch/arm/boot/dts/ste-ux500-samsung-gavini.dts

@@ -30,6 +30,14 @@ battery-thermal {
 			polling-delay = <0>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&bat_therm>;
+
+			trips {
+				battery-crit-hi {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 	};
 

arch/arm/boot/dts/ste-ux500-samsung-golden.dts

@@ -35,6 +35,14 @@ battery-thermal {
 			polling-delay = <0>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&bat_therm>;
+
+			trips {
+				battery-crit-hi {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 	};
 

arch/arm/boot/dts/ste-ux500-samsung-janice.dts

@@ -30,6 +30,14 @@ battery-thermal {
 			polling-delay = <0>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&bat_therm>;
+
+			trips {
+				battery-crit-hi {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 	};
 

arch/arm/boot/dts/ste-ux500-samsung-kyle.dts

@@ -34,6 +34,14 @@ battery-thermal {
 			polling-delay = <0>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&bat_therm>;
+
+			trips {
+				battery-crit-hi {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 	};
 

arch/arm/boot/dts/ste-ux500-samsung-skomer.dts

@@ -30,6 +30,14 @@ battery-thermal {
 			polling-delay = <0>;
 			polling-delay-passive = <0>;
 			thermal-sensors = <&bat_therm>;
+
+			trips {
+				battery-crit-hi {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 	};
 

arch/arm/mach-at91/pm_suspend.S

@@ -169,10 +169,15 @@ sr_ena_2:
 	cmp	tmp1, #UDDRC_STAT_SELFREF_TYPE_SW
 	bne	sr_ena_2
 
-	/* Put DDR PHY's DLL in bypass mode for non-backup modes. */
+	/* Disable DX DLLs for non-backup modes. */
 	cmp	r7, #AT91_PM_BACKUP
 	beq	sr_ena_3
 
+	/* Do not soft reset the AC DLL. */
+	ldr	tmp1, [r3, DDR3PHY_ACDLLCR]
+	bic	tmp1, tmp1, DDR3PHY_ACDLLCR_DLLSRST
+	str	tmp1, [r3, DDR3PHY_ACDLLCR]
+
 	/* Disable DX DLLs. */
 	ldr	tmp1, [r3, #DDR3PHY_DX0DLLCR]
 	orr	tmp1, tmp1, #DDR3PHY_DXDLLCR_DLLDIS

arch/arm64/boot/dts/arm/juno-base.dtsi

@@ -751,12 +751,26 @@ pmic {
 			polling-delay = <1000>;
 			polling-delay-passive = <100>;
 			thermal-sensors = <&scpi_sensors0 0>;
+			trips {
+				pmic_crit0: trip0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 
 		soc {
 			polling-delay = <1000>;
 			polling-delay-passive = <100>;
 			thermal-sensors = <&scpi_sensors0 3>;
+			trips {
+				soc_crit0: trip0 {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
 		};
 
 		big_cluster_thermal_zone: big-cluster {

arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi

@@ -779,6 +779,9 @@ emdio1: mdio@8b96000 {
 			little-endian;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			clock-frequency = <2500000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
 			status = "disabled";
 		};
 
@@ -788,6 +791,9 @@ emdio2: mdio@8b97000 {
 			little-endian;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			clock-frequency = <2500000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(1)>;
 			status = "disabled";
 		};
 

arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi

@@ -532,6 +532,9 @@ emdio1: mdio@8b96000 {
 			little-endian;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			clock-frequency = <2500000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
 			status = "disabled";
 		};
 
@@ -541,6 +544,9 @@ emdio2: mdio@8b97000 {
 			little-endian;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			clock-frequency = <2500000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
 			status = "disabled";
 		};
 

arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi

@@ -1385,6 +1385,9 @@ emdio1: mdio@8b96000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			little-endian;
+			clock-frequency = <2500000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
 			status = "disabled";
 		};
 
@@ -1395,6 +1398,9 @@ emdio2: mdio@8b97000 {
 			little-endian;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			clock-frequency = <2500000>;
+			clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+					    QORIQ_CLK_PLL_DIV(2)>;
 			status = "disabled";
 		};
 

arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi

@@ -38,9 +38,9 @@ usdhc1: mmc@5b010000 {
 		interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
 		reg = <0x5b010000 0x10000>;
 		clocks = <&sdhc0_lpcg IMX_LPCG_CLK_4>,
-			 <&sdhc0_lpcg IMX_LPCG_CLK_5>,
-			 <&sdhc0_lpcg IMX_LPCG_CLK_0>;
-		clock-names = "ipg", "per", "ahb";
+			 <&sdhc0_lpcg IMX_LPCG_CLK_0>,
+			 <&sdhc0_lpcg IMX_LPCG_CLK_5>;
+		clock-names = "ipg", "ahb", "per";
 		power-domains = <&pd IMX_SC_R_SDHC_0>;
 		status = "disabled";
 	};
@@ -49,9 +49,9 @@ usdhc2: mmc@5b020000 {
 		interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
 		reg = <0x5b020000 0x10000>;
 		clocks = <&sdhc1_lpcg IMX_LPCG_CLK_4>,
-			 <&sdhc1_lpcg IMX_LPCG_CLK_5>,
-			 <&sdhc1_lpcg IMX_LPCG_CLK_0>;
-		clock-names = "ipg", "per", "ahb";
+			 <&sdhc1_lpcg IMX_LPCG_CLK_0>,
+			 <&sdhc1_lpcg IMX_LPCG_CLK_5>;
+		clock-names = "ipg", "ahb", "per";
 		power-domains = <&pd IMX_SC_R_SDHC_1>;
 		fsl,tuning-start-tap = <20>;
 		fsl,tuning-step = <2>;
@@ -62,9 +62,9 @@ usdhc3: mmc@5b030000 {
 		interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
 		reg = <0x5b030000 0x10000>;
 		clocks = <&sdhc2_lpcg IMX_LPCG_CLK_4>,
-			 <&sdhc2_lpcg IMX_LPCG_CLK_5>,
-			 <&sdhc2_lpcg IMX_LPCG_CLK_0>;
-		clock-names = "ipg", "per", "ahb";
+			 <&sdhc2_lpcg IMX_LPCG_CLK_0>,
+			 <&sdhc2_lpcg IMX_LPCG_CLK_5>;
+		clock-names = "ipg", "ahb", "per";
 		power-domains = <&pd IMX_SC_R_SDHC_2>;
 		status = "disabled";
 	};

arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts

@@ -250,21 +250,21 @@ MX8MM_IOMUXC_SAI1_RXD1_GPIO4_IO3			0x1c4
 		/* SODIMM 96 */
 		MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4			0x1c4
 		/* CPLD_D[7] */
-		MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5			0x1c4
+		MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5			0x184
 		/* CPLD_D[6] */
-		MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0			0x1c4
+		MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0			0x184
 		/* CPLD_D[5] */
-		MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11			0x1c4
+		MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11			0x184
 		/* CPLD_D[4] */
-		MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12			0x1c4
+		MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12			0x184
 		/* CPLD_D[3] */
-		MX8MM_IOMUXC_SAI1_TXD1_GPIO4_IO13			0x1c4
+		MX8MM_IOMUXC_SAI1_TXD1_GPIO4_IO13			0x184
 		/* CPLD_D[2] */
-		MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14			0x1c4
+		MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14			0x184
 		/* CPLD_D[1] */
-		MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15			0x1c4
+		MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15			0x184
 		/* CPLD_D[0] */
-		MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16			0x1c4
+		MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16			0x184
 		/* KBD_intK */
 		MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27			0x1c4
 		/* DISP_reset */

arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts

@@ -34,11 +34,25 @@ reg_usdhc2_vmmc: regulator-vmmc {
 		off-on-delay-us = <12000>;
 	};
 
-	extcon_usbotg1: extcon-usbotg1 {
-		compatible = "linux,extcon-usb-gpio";
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		type = "micro";
+		label = "X19";
 		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usb1_extcon>;
-		id-gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&pinctrl_usb1_connector>;
+		id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				usb_dr_connector: endpoint {
+					remote-endpoint = <&usb1_drd_sw>;
+				};
+			};
+		};
 	};
 };
 
@@ -105,13 +119,19 @@ &usbotg1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usbotg1>;
 	dr_mode = "otg";
-	extcon = <&extcon_usbotg1>;
 	srp-disable;
 	hnp-disable;
 	adp-disable;
 	power-active-high;
 	over-current-active-low;
+	usb-role-switch;
 	status = "okay";
+
+	port {
+		usb1_drd_sw: endpoint {
+			remote-endpoint = <&usb_dr_connector>;
+		};
+	};
 };
 
 &usbotg2 {
@@ -231,7 +251,7 @@ pinctrl_usbotg1: usbotg1grp {
 			   <MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC		0x84>;
 	};
 
-	pinctrl_usb1_extcon: usb1-extcongrp {
+	pinctrl_usb1_connector: usb1-connectorgrp {
 		fsl,pins = <MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x1c0>;
 	};
 

arch/arm64/boot/dts/freescale/imx8mm.dtsi

@@ -276,6 +276,7 @@ usbphynop1: usbphynop1 {
 		assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
 		assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>;
 		clock-names = "main_clk";
+		power-domains = <&pgc_otg1>;
 	};
 
 	usbphynop2: usbphynop2 {
@@ -285,6 +286,7 @@ usbphynop2: usbphynop2 {
 		assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
 		assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>;
 		clock-names = "main_clk";
+		power-domains = <&pgc_otg2>;
 	};
 
 	soc: soc@0 {
@@ -674,13 +676,11 @@ pgc_pcie: power-domain@1 {
 					pgc_otg1: power-domain@2 {
 						#power-domain-cells = <0>;
 						reg = <IMX8MM_POWER_DOMAIN_OTG1>;
-						power-domains = <&pgc_hsiomix>;
 					};
 
 					pgc_otg2: power-domain@3 {
 						#power-domain-cells = <0>;
 						reg = <IMX8MM_POWER_DOMAIN_OTG2>;
-						power-domains = <&pgc_hsiomix>;
 					};
 
 					pgc_gpumix: power-domain@4 {
@@ -1186,7 +1186,7 @@ usbotg1: usb@32e40000 {
 				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
 				phys = <&usbphynop1>;
 				fsl,usbmisc = <&usbmisc1 0>;
-				power-domains = <&pgc_otg1>;
+				power-domains = <&pgc_hsiomix>;
 				status = "disabled";
 			};
 
@@ -1206,7 +1206,7 @@ usbotg2: usb@32e50000 {
 				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
 				phys = <&usbphynop2>;
 				fsl,usbmisc = <&usbmisc2 0>;
-				power-domains = <&pgc_otg2>;
+				power-domains = <&pgc_hsiomix>;
 				status = "disabled";
 			};
 
@@ -1244,10 +1244,10 @@ dma_apbh: dma-controller@33000000 {
 			clocks = <&clk IMX8MM_CLK_NAND_USDHC_BUS_RAWNAND_CLK>;
 		};
 
-		gpmi: nand-controller@33002000{
+		gpmi: nand-controller@33002000 {
 			compatible = "fsl,imx8mm-gpmi-nand", "fsl,imx7d-gpmi-nand";
 			#address-cells = <1>;
-			#size-cells = <1>;
+			#size-cells = <0>;
 			reg = <0x33002000 0x2000>, <0x33004000 0x4000>;
 			reg-names = "gpmi-nand", "bch";
 			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;

arch/arm64/boot/dts/freescale/imx8mn.dtsi

@@ -662,7 +662,6 @@ pgc_hsiomix: power-domain@0 {
 					pgc_otg1: power-domain@1 {
 						#power-domain-cells = <0>;
 						reg = <IMX8MN_POWER_DOMAIN_OTG1>;
-						power-domains = <&pgc_hsiomix>;
 					};
 
 					pgc_gpumix: power-domain@2 {
@@ -1076,7 +1075,7 @@ usbotg1: usb@32e40000 {
 				assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_500M>;
 				phys = <&usbphynop1>;
 				fsl,usbmisc = <&usbmisc1 0>;
-				power-domains = <&pgc_otg1>;
+				power-domains = <&pgc_hsiomix>;
 				status = "disabled";
 			};
 
@@ -1103,7 +1102,7 @@ dma_apbh: dma-controller@33000000 {
 		gpmi: nand-controller@33002000 {
 			compatible = "fsl,imx8mn-gpmi-nand", "fsl,imx7d-gpmi-nand";
 			#address-cells = <1>;
-			#size-cells = <1>;
+			#size-cells = <0>;
 			reg = <0x33002000 0x2000>, <0x33004000 0x4000>;
 			reg-names = "gpmi-nand", "bch";
 			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
@@ -1175,5 +1174,6 @@ usbphynop1: usbphynop1 {
 		assigned-clocks = <&clk IMX8MN_CLK_USB_PHY_REF>;
 		assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_100M>;
 		clock-names = "main_clk";
+		power-domains = <&pgc_otg1>;
 	};
 };

arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi

@@ -354,16 +354,6 @@ &gpio2 {
 			  "SODIMM_82",
 			  "SODIMM_70",
 			  "SODIMM_72";
-
-	ctrl-sleep-moci-hog {
-		gpio-hog;
-		/* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
-		gpios = <29 GPIO_ACTIVE_HIGH>;
-		line-name = "CTRL_SLEEP_MOCI#";
-		output-high;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ctrl_sleep_moci>;
-	};
 };
 
 &gpio3 {
@@ -432,6 +422,16 @@ &gpio4 {
 			  "SODIMM_256",
 			  "SODIMM_48",
 			  "SODIMM_44";
+
+	ctrl-sleep-moci-hog {
+		gpio-hog;
+		/* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
+		gpios = <29 GPIO_ACTIVE_HIGH>;
+		line-name = "CTRL_SLEEP_MOCI#";
+		output-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ctrl_sleep_moci>;
+	};
 };
 
 /* On-module I2C */

arch/arm64/boot/dts/freescale/imx93.dtsi

@@ -451,7 +451,7 @@ gpio2: gpio@43810080 {
 			clocks = <&clk IMX93_CLK_GPIO2_GATE>,
 				 <&clk IMX93_CLK_GPIO2_GATE>;
 			clock-names = "gpio", "port";
-			gpio-ranges = <&iomuxc 0 32 32>;
+			gpio-ranges = <&iomuxc 0 4 30>;
 		};
 
 		gpio3: gpio@43820080 {
@@ -465,7 +465,8 @@ gpio3: gpio@43820080 {
 			clocks = <&clk IMX93_CLK_GPIO3_GATE>,
 				 <&clk IMX93_CLK_GPIO3_GATE>;
 			clock-names = "gpio", "port";
-			gpio-ranges = <&iomuxc 0 64 32>;
+			gpio-ranges = <&iomuxc 0 84 8>, <&iomuxc 8 66 18>,
+				      <&iomuxc 26 34 2>, <&iomuxc 28 0 4>;
 		};
 
 		gpio4: gpio@43830080 {
@@ -479,7 +480,7 @@ gpio4: gpio@43830080 {
 			clocks = <&clk IMX93_CLK_GPIO4_GATE>,
 				 <&clk IMX93_CLK_GPIO4_GATE>;
 			clock-names = "gpio", "port";
-			gpio-ranges = <&iomuxc 0 96 32>;
+			gpio-ranges = <&iomuxc 0 38 28>, <&iomuxc 28 36 2>;
 		};
 
 		gpio1: gpio@47400080 {
@@ -493,7 +494,7 @@ gpio1: gpio@47400080 {
 			clocks = <&clk IMX93_CLK_GPIO1_GATE>,
 				 <&clk IMX93_CLK_GPIO1_GATE>;
 			clock-names = "gpio", "port";
-			gpio-ranges = <&iomuxc 0 0 32>;
+			gpio-ranges = <&iomuxc 0 92 16>;
 		};
 
 		s4muap: mailbox@47520000 {
@@ -501,7 +502,7 @@ s4muap: mailbox@47520000 {
 			reg = <0x47520000 0x10000>;
 			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "txirq", "rxirq";
+			interrupt-names = "tx", "rx";
 			#mbox-cells = <2>;
 		};
 

arch/arm64/boot/dts/qcom/ipq8074.dtsi

@@ -668,7 +668,7 @@ watchdog: watchdog@b017000 {
 
 		apcs_glb: mailbox@b111000 {
 			compatible = "qcom,ipq8074-apcs-apps-global";
-			reg = <0x0b111000 0x6000>;
+			reg = <0x0b111000 0x1000>;
 
 			#clock-cells = <1>;
 			#mbox-cells = <1>;

arch/arm64/boot/dts/qcom/msm8996.dtsi

@@ -3504,7 +3504,7 @@ frame@98c0000 {
 		};
 
 		saw3: syscon@9a10000 {
-			compatible = "qcom,tcsr-msm8996", "syscon";
+			compatible = "syscon";
 			reg = <0x09a10000 0x1000>;
 		};
 

arch/arm64/boot/dts/qcom/sa8155p-adp.dts

@@ -43,7 +43,6 @@ vreg_s4a_1p8: smps4 {
 
 		regulator-always-on;
 		regulator-boot-on;
-		regulator-allow-set-load;
 
 		vin-supply = <&vreg_3p3>;
 	};
@@ -137,6 +136,9 @@ vreg_l5a_0p88: ldo5 {
 			regulator-max-microvolt = <880000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
+			regulator-allowed-modes =
+			    <RPMH_REGULATOR_MODE_LPM
+			     RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l7a_1p8: ldo7 {
@@ -152,6 +154,9 @@ vreg_l10a_2p96: ldo10 {
 			regulator-max-microvolt = <2960000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
+			regulator-allowed-modes =
+			    <RPMH_REGULATOR_MODE_LPM
+			     RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l11a_0p8: ldo11 {
@@ -258,6 +263,9 @@ vreg_l5c_1p2: ldo5 {
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
+			regulator-allowed-modes =
+			    <RPMH_REGULATOR_MODE_LPM
+			     RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l7c_1p8: ldo7 {
@@ -273,6 +281,9 @@ vreg_l8c_1p2: ldo8 {
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
+			regulator-allowed-modes =
+			    <RPMH_REGULATOR_MODE_LPM
+			     RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l10c_3p3: ldo10 {