Commit 05f0addd authored by Thomas Daniel's avatar Thomas Daniel Committed by Mika Kuoppala

drm/i915/icl: Enhanced execution list support

Enhanced Execlists is an upgraded version of execlists which supports
up to 8 ports. The lrcs to be submitted are written to a submit queue
(the ExecLists Submission Queue - ELSQ), which is then loaded on the
HW. When writing to the ELSP register, the lrcs are written cyclically
in the queue from position 0 to position 7. Alternatively, it is
possible to write directly in the individual positions of the queue
using the ELSQC registers. To be able to re-use all the existing code
we're using the latter method and we're currently limiting ourself to
only using 2 elements.

v2: Rebase.
v3: Switch from !IS_GEN11 to GEN < 11 (Daniele Ceraolo Spurio).
v4: Use the elsq registers instead of elsp. (Daniele Ceraolo Spurio)
v5: Reword commit, rename regs to be closer to specs, turn off
    preemption (Daniele), reuse engine->execlists.elsp (Chris)
v6: use has_logical_ring_elsq to differentiate the new paths
v7: add preemption support, rename els to submit_reg (Chris)
v8: save the ctrl register inside the execlists struct, drop CSB
    handling updates (superseded by preempt_complete_status) (Chris)
v9: s/drm_i915_gem_request/i915_request (Mika)
v10: resolved conflict in inject_preempt_context (Mika)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: default avatarThomas Daniel <thomas.daniel@intel.com>
Signed-off-by: default avatarRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: default avatarDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: default avatarMika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: default avatarChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180302161501.28594-4-mika.kuoppala@linux.intel.com
parent ac52da6a
......@@ -2772,6 +2772,8 @@ intel_info(const struct drm_i915_private *dev_priv)
#define HAS_LOGICAL_RING_CONTEXTS(dev_priv) \
((dev_priv)->info.has_logical_ring_contexts)
#define HAS_LOGICAL_RING_ELSQ(dev_priv) \
((dev_priv)->info.has_logical_ring_elsq)
#define HAS_LOGICAL_RING_PREEMPTION(dev_priv) \
((dev_priv)->info.has_logical_ring_preemption)
......
......@@ -594,7 +594,8 @@ static const struct intel_device_info intel_cannonlake_info = {
GEN10_FEATURES, \
GEN(11), \
.ddb_size = 2048, \
.has_csr = 0
.has_csr = 0, \
.has_logical_ring_elsq = 1
static const struct intel_device_info intel_icelake_11_info = {
GEN11_FEATURES,
......
......@@ -96,6 +96,7 @@ enum intel_platform {
func(has_l3_dpf); \
func(has_llc); \
func(has_logical_ring_contexts); \
func(has_logical_ring_elsq); \
func(has_logical_ring_preemption); \
func(has_overlay); \
func(has_pooled_eu); \
......
......@@ -417,18 +417,30 @@ static u64 execlists_update_context(struct i915_request *rq)
return ce->lrc_desc;
}
static inline void elsp_write(u64 desc, u32 __iomem *elsp)
static inline void write_desc(struct intel_engine_execlists *execlists, u64 desc, u32 port)
{
writel(upper_32_bits(desc), elsp);
writel(lower_32_bits(desc), elsp);
if (execlists->ctrl_reg) {
writel(lower_32_bits(desc), execlists->submit_reg + port * 2);
writel(upper_32_bits(desc), execlists->submit_reg + port * 2 + 1);
} else {
writel(upper_32_bits(desc), execlists->submit_reg);
writel(lower_32_bits(desc), execlists->submit_reg);
}
}
static void execlists_submit_ports(struct intel_engine_cs *engine)
{
struct execlist_port *port = engine->execlists.port;
struct intel_engine_execlists *execlists = &engine->execlists;
struct execlist_port *port = execlists->port;
unsigned int n;
for (n = execlists_num_ports(&engine->execlists); n--; ) {
/*
* ELSQ note: the submit queue is not cleared after being submitted
* to the HW so we need to make sure we always clean it up. This is
* currently ensured by the fact that we always write the same number
* of elsq entries, keep this in mind before changing the loop below.
*/
for (n = execlists_num_ports(execlists); n--; ) {
struct i915_request *rq;
unsigned int count;
u64 desc;
......@@ -452,9 +464,14 @@ static void execlists_submit_ports(struct intel_engine_cs *engine)
desc = 0;
}
elsp_write(desc, engine->execlists.elsp);
write_desc(execlists, desc, n);
}
execlists_clear_active(&engine->execlists, EXECLISTS_ACTIVE_HWACK);
/* we need to manually load the submit queue */
if (execlists->ctrl_reg)
writel(EL_CTRL_LOAD, execlists->ctrl_reg);
execlists_clear_active(execlists, EXECLISTS_ACTIVE_HWACK);
}
static bool ctx_single_port_submission(const struct i915_gem_context *ctx)
......@@ -487,11 +504,12 @@ static void port_assign(struct execlist_port *port, struct i915_request *rq)
static void inject_preempt_context(struct intel_engine_cs *engine)
{
struct intel_engine_execlists *execlists = &engine->execlists;
struct intel_context *ce =
&engine->i915->preempt_context->engine[engine->id];
unsigned int n;
GEM_BUG_ON(engine->execlists.preempt_complete_status !=
GEM_BUG_ON(execlists->preempt_complete_status !=
upper_32_bits(ce->lrc_desc));
GEM_BUG_ON((ce->lrc_reg_state[CTX_CONTEXT_CONTROL + 1] &
_MASKED_BIT_ENABLE(CTX_CTRL_ENGINE_CTX_RESTORE_INHIBIT |
......@@ -504,10 +522,15 @@ static void inject_preempt_context(struct intel_engine_cs *engine)
* the state of the GPU is known (idle).
*/
GEM_TRACE("%s\n", engine->name);
for (n = execlists_num_ports(&engine->execlists); --n; )
elsp_write(0, engine->execlists.elsp);
for (n = execlists_num_ports(execlists); --n; )
write_desc(execlists, 0, n);
write_desc(execlists, ce->lrc_desc, n);
/* we need to manually load the submit queue */
if (execlists->ctrl_reg)
writel(EL_CTRL_LOAD, execlists->ctrl_reg);
elsp_write(ce->lrc_desc, engine->execlists.elsp);
execlists_clear_active(&engine->execlists, EXECLISTS_ACTIVE_HWACK);
execlists_set_active(&engine->execlists, EXECLISTS_ACTIVE_PREEMPT);
}
......@@ -2131,8 +2154,15 @@ static int logical_ring_init(struct intel_engine_cs *engine)
if (ret)
goto error;
engine->execlists.elsp =
engine->i915->regs + i915_mmio_reg_offset(RING_ELSP(engine));
if (HAS_LOGICAL_RING_ELSQ(engine->i915)) {
engine->execlists.submit_reg = engine->i915->regs +
i915_mmio_reg_offset(RING_EXECLIST_SQ_CONTENTS(engine));
engine->execlists.ctrl_reg = engine->i915->regs +
i915_mmio_reg_offset(RING_EXECLIST_CONTROL(engine));
} else {
engine->execlists.submit_reg = engine->i915->regs +
i915_mmio_reg_offset(RING_ELSP(engine));
}
engine->execlists.preempt_complete_status = ~0u;
if (engine->i915->preempt_context)
......@@ -2401,7 +2431,7 @@ populate_lr_context(struct i915_gem_context *ctx,
if (!engine->default_state)
regs[CTX_CONTEXT_CONTROL + 1] |=
_MASKED_BIT_ENABLE(CTX_CTRL_ENGINE_CTX_RESTORE_INHIBIT);
if (ctx == ctx->i915->preempt_context)
if (ctx == ctx->i915->preempt_context && INTEL_GEN(engine->i915) < 11)
regs[CTX_CONTEXT_CONTROL + 1] |=
_MASKED_BIT_ENABLE(CTX_CTRL_ENGINE_CTX_RESTORE_INHIBIT |
CTX_CTRL_ENGINE_CTX_SAVE_INHIBIT);
......
......@@ -42,6 +42,9 @@
#define RING_CONTEXT_STATUS_BUF_LO(engine, i) _MMIO((engine)->mmio_base + 0x370 + (i) * 8)
#define RING_CONTEXT_STATUS_BUF_HI(engine, i) _MMIO((engine)->mmio_base + 0x370 + (i) * 8 + 4)
#define RING_CONTEXT_STATUS_PTR(engine) _MMIO((engine)->mmio_base + 0x3a0)
#define RING_EXECLIST_SQ_CONTENTS(engine) _MMIO((engine)->mmio_base + 0x510)
#define RING_EXECLIST_CONTROL(engine) _MMIO((engine)->mmio_base + 0x550)
#define EL_CTRL_LOAD (1 << 0)
/* The docs specify that the write pointer wraps around after 5h, "After status
* is written out to the last available status QW at offset 5h, this pointer
......
......@@ -209,9 +209,17 @@ struct intel_engine_execlists {
bool no_priolist;
/**
* @elsp: the ExecList Submission Port register
* @submit_reg: gen-specific execlist submission register
* set to the ExecList Submission Port (elsp) register pre-Gen11 and to
* the ExecList Submission Queue Contents register array for Gen11+
*/
u32 __iomem *elsp;
u32 __iomem *submit_reg;
/**
* @ctrl_reg: the enhanced execlists control register, used to load the
* submit queue on the HW and to request preemptions to idle
*/
u32 __iomem *ctrl_reg;
/**
* @port: execlist port states
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment