[media] staging: media: Remove easycap driver

This driver has been replaced by stk1160.
Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

drivers/staging/media/Kconfig

@@ -25,8 +25,6 @@ source "drivers/staging/media/cxd2099/Kconfig"
 
 source "drivers/staging/media/dt3155v4l/Kconfig"
 
-source "drivers/staging/media/easycap/Kconfig"
-
 source "drivers/staging/media/go7007/Kconfig"
 
 source "drivers/staging/media/solo6x10/Kconfig"

drivers/staging/media/Makefile

 obj-$(CONFIG_DVB_AS102)		+= as102/
 obj-$(CONFIG_DVB_CXD2099)	+= cxd2099/
-obj-$(CONFIG_EASYCAP)		+= easycap/
 obj-$(CONFIG_LIRC_STAGING)	+= lirc/
 obj-$(CONFIG_SOLO6X10)		+= solo6x10/
 obj-$(CONFIG_VIDEO_DT3155)	+= dt3155v4l/

drivers/staging/media/easycap/Kconfig

-config EASYCAP
-	tristate "EasyCAP USB ID 05e1:0408 support"
-	depends on USB && VIDEO_DEV && SND
-	select SND_PCM
-
-	---help---
-	  This is an integrated audio/video driver for EasyCAP cards with
-	  USB ID 05e1:0408.  It supports two hardware variants:
-
-	  *  EasyCAP USB 2.0 Video Adapter with Audio, Model DC60,
-	     having input cables labelled CVBS, S-VIDEO, AUDIO(L), AUDIO(R)
-
-	  *  EasyCAP002 4-Channel USB 2.0 DVR, having input cables labelled
-	     1, 2, 3, 4 and an unlabelled input cable for a microphone.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called easycap
-
-config EASYCAP_DEBUG
-	bool "Enable EasyCAP driver debugging"
-	depends on EASYCAP
-
-	---help---
-	  This option enables debug printouts
-
-	  To enable debug, pass the debug level to the debug module
-          parameter:
-
-          modprobe easycap debug=[0..9]
-

drivers/staging/media/easycap/Makefile

-easycap-objs := easycap_main.o
-easycap-objs += easycap_low.o
-easycap-objs += easycap_ioctl.o
-easycap-objs += easycap_settings.o
-easycap-objs += easycap_testcard.o
-easycap-objs += easycap_sound.o
-obj-$(CONFIG_EASYCAP) += easycap.o
-
-ccflags-y := -Wall
-

drivers/staging/media/easycap/README

-
-        ***********************************************************
-        *   EasyCAP USB 2.0 Video Adapter with Audio, Model DC60  *
-        *                            and                          *
-        *             EasyCAP002 4-Channel USB 2.0 DVR            *
-        ***********************************************************
-                     Mike Thomas  <rmthomas@sciolus.org>
-
-
-
-SUPPORTED HARDWARE
-------------------
-
-This driver is intended for use with hardware having USB ID 05e1:0408.
-Two kinds of EasyCAP have this USB ID, namely:
-
-    *  EasyCAP USB 2.0 Video Adapter with Audio, Model DC60,
-       having input cables labelled CVBS, S-VIDEO, AUDIO(L), AUDIO(R)
-
-    *  EasyCAP002 4-Channel USB 2.0 DVR, having input cables labelled
-       1, 2, 3, 4 and an unlabelled input cable for a microphone.
-
-
-BUILD OPTIONS AND DEPENDENCIES
-------------------------------
-
-Unless EASYCAP_DEBUG is defined during compilation it will not be possible
-to select a debug level at the time of module installation.
-
-
-KNOWN RUNTIME ISSUES
---------------------
-
-(1) Intentionally, this driver will not stream material which is unambiguously
-identified by the hardware as copy-protected.  Normal video output will be
-present for about a minute but will then freeze when this situation arises.
-
-(2) The controls for luminance, contrast, saturation, hue and volume may not
-always work properly.
-
-(3) Reduced-resolution S-Video seems to suffer from moire artefacts.
-
-
-INPUT NUMBERING
----------------
-
-For the EasyCAP with S-VIDEO input cable the driver regards a request for
-inputs numbered 0 or 1 as referring to CVBS and a request for input
-numbered 5 as referring to S-VIDEO.
-
-For the EasyCAP with four CVBS inputs the driver expects to be asked for
-any one of inputs numbered 1,2,3,4.  If input 0 is asked for, it is
-interpreted as input 1.
-
-
-MODULE PARAMETERS
------------------
-
-Three module parameters are defined:
-
-debug      the easycap module is configured at diagnostic level n (0 to 9)
-gain       audio gain level n (0 to 31, default is 16)
-bars       whether to display testcard bars when incoming video signal is lost
-           0 => no, 1 => yes (default)
-
-
-SUPPORTED TV STANDARDS AND RESOLUTIONS
---------------------------------------
-
-The following TV standards are natively supported by the hardware and are
-usable as (for example) the "norm=" parameter in the mplayer command:
-
-    PAL_BGHIN,    NTSC_N_443,
-    PAL_Nc,       NTSC_N,
-    SECAM,        NTSC_M,        NTSC_M_JP,
-    PAL_60,       NTSC_443,
-    PAL_M.
-
-In addition, the driver offers "custom" pseudo-standards with a framerate
-which is 20% of the usual framerate.  These pseudo-standards are named:
-
-    PAL_BGHIN_SLOW,    NTSC_N_443_SLOW,
-    PAL_Nc_SLOW,       NTSC_N_SLOW,
-    SECAM_SLOW,        NTSC_M_SLOW,        NTSC_M_JP_SLOW,
-    PAL_60_SLOW,       NTSC_443_SLOW,
-    PAL_M_SLOW.
-
-
-The available picture sizes are:
-
-     at 25 frames per second:   720x576, 704x576, 640x480, 360x288, 320x240;
-     at 30 frames per second:   720x480, 640x480, 360x240, 320x240.
-
-
-WHAT'S TESTED AND WHAT'S NOT
-----------------------------
-
-This driver is known to work with mplayer, mencoder, tvtime, zoneminder,
-xawtv, gstreamer and sufficiently recent versions of vlc.  An interface
-to ffmpeg is implemented, but serious audio-video synchronization problems
-remain.
-
-The driver is designed to support all the TV standards accepted by the
-hardware, but as yet it has actually been tested on only a few of these.
-
-I have been unable to test and calibrate the S-video input myself because I
-do not possess any equipment with S-video output.
-
-
-UDEV RULES
-----------
-
-In order that the special files /dev/easycap0 and /dev/easysnd1 are created
-with conveniently relaxed permissions when the EasyCAP is plugged in, a file
-is preferably to be provided in directory /etc/udev/rules.d with content:
-
-ACTION!="add|change", GOTO="easycap_rules_end"
-ATTRS{idVendor}=="05e1", ATTRS{idProduct}=="0408", \
-	MODE="0666", OWNER="root", GROUP="root"
-LABEL="easycap_rules_end"
-
-
-MODPROBE CONFIGURATION
-----------------------
-
-The easycap module is in competition with the module snd-usb-audio for the
-EasyCAP's audio channel, and its installation can be aided by providing a
-file in directory /etc/modprobe.d with content:
-
-options easycap  gain=16 bars=1
-install easycap /sbin/rmmod snd-usb-audio; /sbin/modprobe --ignore-install easycap
-
-
-ACKNOWLEGEMENTS AND REFERENCES
-------------------------------
-This driver makes use of information contained in the Syntek Semicon DC-1125
-Driver, presently maintained at http://sourceforge.net/projects/syntekdriver/
-by Nicolas Vivien.  Particularly useful has been a patch to the latter driver
-provided by Ivor Hewitt in January 2009.  The NTSC implementation is taken
-from the work of Ben Trask.
-