Commit 06be6726 authored by Tali Perry's avatar Tali Perry Committed by Wolfram Sang

i2c: npcm7xx: Fix timeout calculation

timeout_usec value calculation was wrong, the calculated value
was in msec instead of usec.

Fixes: 56a1485b ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver")
Signed-off-by: default avatarTali Perry <tali.perry1@gmail.com>
Reviewed-by: default avatarAvi Fishman <avifishman70@gmail.com>
Reviewed-by: default avatarJoel Stanley <joel@jms.id.au>
Reviewed-by: default avatarAlex Qiu <xqiu@google.com>
Signed-off-by: default avatarWolfram Sang <wsa@kernel.org>
parent f4d51dff
...@@ -2093,8 +2093,12 @@ static int npcm_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, ...@@ -2093,8 +2093,12 @@ static int npcm_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
} }
} }
/* Adaptive TimeOut: astimated time in usec + 100% margin */ /*
timeout_usec = (2 * 10000 / bus->bus_freq) * (2 + nread + nwrite); * Adaptive TimeOut: estimated time in usec + 100% margin:
* 2: double the timeout for clock stretching case
* 9: bits per transaction (including the ack/nack)
*/
timeout_usec = (2 * 9 * USEC_PER_SEC / bus->bus_freq) * (2 + nread + nwrite);
timeout = max(msecs_to_jiffies(35), usecs_to_jiffies(timeout_usec)); timeout = max(msecs_to_jiffies(35), usecs_to_jiffies(timeout_usec));
if (nwrite >= 32 * 1024 || nread >= 32 * 1024) { if (nwrite >= 32 * 1024 || nread >= 32 * 1024) {
dev_err(bus->dev, "i2c%d buffer too big\n", bus->num); dev_err(bus->dev, "i2c%d buffer too big\n", bus->num);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment