Commit 06e39572 authored by Ji-Ze Hong (Peter Hong)'s avatar Ji-Ze Hong (Peter Hong) Committed by Greg Kroah-Hartman

serial: 8250_fintek: Set IRQ Mode when port probed

Set IRQ Mode when port probed in probe_setup_port()

It should hold the IO port premission via fintek_8250_enter_key() and
release via fintek_8250_exit_key() when we configure the SuperIO.

This patch will move all SuperIO configure operations to
probe_setup_port() to reduce fintek_8250_enter_key() and
fintek_8250_exit_key() usage.
Suggested-by: default avatarRicardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: default avatarJi-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent f1232ac2
......@@ -154,10 +154,21 @@ static int fintek_8250_rs485_config(struct uart_port *port,
return 0;
}
static int find_base_port(struct fintek_8250 *pdata, u16 io_address)
static void fintek_8250_set_irq_mode(struct fintek_8250 *pdata, bool is_level)
{
sio_write_reg(pdata, LDN, pdata->index);
sio_write_mask_reg(pdata, FINTEK_IRQ_MODE, IRQ_SHARE, IRQ_SHARE);
sio_write_mask_reg(pdata, FINTEK_IRQ_MODE, IRQ_MODE_MASK,
is_level ? IRQ_LEVEL_LOW : IRQ_EDGE_HIGH);
}
static int probe_setup_port(struct fintek_8250 *pdata, u16 io_address,
unsigned int irq)
{
static const u16 addr[] = {0x4e, 0x2e};
static const u8 keys[] = {0x77, 0xa0, 0x87, 0x67};
struct irq_data *irq_data;
bool level_mode = false;
int i, j, k;
for (i = 0; i < ARRAY_SIZE(addr); i++) {
......@@ -181,9 +192,16 @@ static int find_base_port(struct fintek_8250 *pdata, u16 io_address)
if (aux != io_address)
continue;
fintek_8250_exit_key(addr[i]);
pdata->index = k;
irq_data = irq_get_irq_data(irq);
if (irq_data)
level_mode =
irqd_is_level_type(irq_data);
fintek_8250_set_irq_mode(pdata, level_mode);
fintek_8250_exit_key(addr[i]);
return 0;
}
......@@ -194,31 +212,12 @@ static int find_base_port(struct fintek_8250 *pdata, u16 io_address)
return -ENODEV;
}
static int fintek_8250_set_irq_mode(struct fintek_8250 *pdata, bool level_mode)
{
int status;
status = fintek_8250_enter_key(pdata->base_port, pdata->key);
if (status)
return status;
sio_write_reg(pdata, LDN, pdata->index);
sio_write_mask_reg(pdata, FINTEK_IRQ_MODE, IRQ_SHARE, IRQ_SHARE);
sio_write_mask_reg(pdata, FINTEK_IRQ_MODE, IRQ_MODE_MASK,
level_mode ? IRQ_LEVEL_LOW : IRQ_EDGE_HIGH);
fintek_8250_exit_key(pdata->base_port);
return 0;
}
int fintek_8250_probe(struct uart_8250_port *uart)
{
struct fintek_8250 *pdata;
struct fintek_8250 probe_data;
struct irq_data *irq_data = irq_get_irq_data(uart->port.irq);
bool level_mode = irqd_is_level_type(irq_data);
if (find_base_port(&probe_data, uart->port.iobase))
if (probe_setup_port(&probe_data, uart->port.iobase, uart->port.irq))
return -ENODEV;
pdata = devm_kzalloc(uart->port.dev, sizeof(*pdata), GFP_KERNEL);
......@@ -229,5 +228,5 @@ int fintek_8250_probe(struct uart_8250_port *uart)
uart->port.rs485_config = fintek_8250_rs485_config;
uart->port.private_data = pdata;
return fintek_8250_set_irq_mode(pdata, level_mode);
return 0;
}
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment