Commit 07469495 authored by Uwe Kleine-König's avatar Uwe Kleine-König

ARM: imx: move mx1 support to mach-imx

Signed-off-by: default avatarUwe Kleine-König <u.kleine-koenig@pengutronix.de>
parent 551823e7
......@@ -145,7 +145,7 @@ machine-$(CONFIG_ARCH_LOKI) := loki
machine-$(CONFIG_ARCH_MMP) := mmp
machine-$(CONFIG_ARCH_MSM) := msm
machine-$(CONFIG_ARCH_MV78XX0) := mv78xx0
machine-$(CONFIG_ARCH_MX1) := mx1
machine-$(CONFIG_ARCH_MX1) := imx
machine-$(CONFIG_ARCH_MX2) := imx
machine-$(CONFIG_ARCH_MX25) := mx25
machine-$(CONFIG_ARCH_MX3) := mx3
......
if ARCH_MX1
comment "MX1 platforms:"
config MACH_MXLADS
bool
config ARCH_MX1ADS
bool "MX1ADS platform"
select MACH_MXLADS
help
Say Y here if you are using Motorola MX1ADS/MXLADS boards
config MACH_SCB9328
bool "Synertronixx scb9328"
help
Say Y here if you are using a Synertronixx scb9328 board
endif
if ARCH_MX2
choice
......
......@@ -6,12 +6,20 @@
obj-y := devices.o
obj-$(CONFIG_ARCH_MX1) += clock-imx1.o mm-imx1.o
obj-$(CONFIG_MACH_MX21) += clock-imx21.o mm-imx21.o
obj-$(CONFIG_MACH_MX27) += cpu-imx27.o
obj-$(CONFIG_MACH_MX27) += clock-imx27.o mm-imx27.o
# Support for CMOS sensor interface
obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o
obj-$(CONFIG_ARCH_MX1ADS) += mach-mx1ads.o
obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o
obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o
obj-$(CONFIG_MACH_MX27ADS) += mach-mx27ads.o
obj-$(CONFIG_MACH_PCM038) += mach-pcm038.o
obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
......
zreladdr-$(CONFIG_ARCH_MX1) := 0x08008000
params_phys-$(CONFIG_ARCH_MX1) := 0x08000100
initrd_phys-$(CONFIG_ARCH_MX1) := 0x08800000
zreladdr-$(CONFIG_MACH_MX21) := 0xC0008000
params_phys-$(CONFIG_MACH_MX21) := 0xC0000100
initrd_phys-$(CONFIG_MACH_MX21) := 0xC0800000
......
......@@ -11,6 +11,9 @@
*
* Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright 2008 Juergen Beisert, kernel@pengutronix.de
* Copyright 2008 Sascha Hauer, kernel@pengutronix.de
* Copyright (c) 2008 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
* Copyright (c) 2008 Darius Augulis <darius.augulis@teltonika.lt>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
......@@ -41,6 +44,199 @@
#include "devices.h"
#if defined(CONFIG_ARCH_MX1)
static struct resource imx1_camera_resources[] = {
{
.start = 0x00224000,
.end = 0x00224010,
.flags = IORESOURCE_MEM,
}, {
.start = MX1_CSI_INT,
.end = MX1_CSI_INT,
.flags = IORESOURCE_IRQ,
},
};
static u64 imx1_camera_dmamask = DMA_BIT_MASK(32);
struct platform_device imx1_camera_device = {
.name = "mx1-camera",
.id = 0, /* This is used to put cameras on this interface */
.dev = {
.dma_mask = &imx1_camera_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
.resource = imx1_camera_resources,
.num_resources = ARRAY_SIZE(imx1_camera_resources),
};
static struct resource imx_i2c_resources[] = {
{
.start = 0x00217000,
.end = 0x00217010,
.flags = IORESOURCE_MEM,
}, {
.start = MX1_I2C_INT,
.end = MX1_I2C_INT,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device imx_i2c_device0 = {
.name = "imx-i2c",
.id = 0,
.resource = imx_i2c_resources,
.num_resources = ARRAY_SIZE(imx_i2c_resources),
};
#define DEFINE_IMX1_UART_DEVICE(n, baseaddr, irqrx, irqtx, irqrts) \
static struct resource imx1_uart_resources ## n[] = { \
{ \
.start = baseaddr, \
.end = baseaddr + 0xd0, \
.flags = IORESOURCE_MEM, \
}, { \
.start = irqrx, \
.end = irqrx, \
.flags = IORESOURCE_IRQ, \
}, { \
.start = irqtx, \
.end = irqtx, \
.flags = IORESOURCE_IRQ, \
}, { \
.start = irqrts, \
.end = irqrts, \
.flags = IORESOURCE_IRQ, \
}, \
}; \
\
struct platform_device imx1_uart_device ## n = { \
.name = "imx-uart", \
.id = n, \
.num_resources = ARRAY_SIZE(imx1_uart_resources ## n), \
.resource = imx1_uart_resources ## n, \
}
DEFINE_IMX1_UART_DEVICE(0, MX1_UART1_BASE_ADDR, MX1_UART1_MINT_RX, MX1_UART1_MINT_TX, MX1_UART1_MINT_RTS);
DEFINE_IMX1_UART_DEVICE(1, MX1_UART2_BASE_ADDR, MX1_UART2_MINT_RX, MX1_UART2_MINT_TX, MX1_UART2_MINT_RTS);
static struct resource imx_rtc_resources[] = {
{
.start = 0x00204000,
.end = 0x00204024,
.flags = IORESOURCE_MEM,
}, {
.start = MX1_RTC_INT,
.end = MX1_RTC_INT,
.flags = IORESOURCE_IRQ,
}, {
.start = MX1_RTC_SAMINT,
.end = MX1_RTC_SAMINT,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device imx_rtc_device = {
.name = "rtc-imx",
.id = 0,
.resource = imx_rtc_resources,
.num_resources = ARRAY_SIZE(imx_rtc_resources),
};
static struct resource imx_wdt_resources[] = {
{
.start = 0x00201000,
.end = 0x00201008,
.flags = IORESOURCE_MEM,
}, {
.start = MX1_WDT_INT,
.end = MX1_WDT_INT,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device imx_wdt_device = {
.name = "imx-wdt",
.id = 0,
.resource = imx_wdt_resources,
.num_resources = ARRAY_SIZE(imx_wdt_resources),
};
static struct resource imx_usb_resources[] = {
{
.start = 0x00212000,
.end = 0x00212148,
.flags = IORESOURCE_MEM,
}, {
.start = MX1_USBD_INT0,
.end = MX1_USBD_INT0,
.flags = IORESOURCE_IRQ,
}, {
.start = MX1_USBD_INT1,
.end = MX1_USBD_INT1,
.flags = IORESOURCE_IRQ,
}, {
.start = MX1_USBD_INT2,
.end = MX1_USBD_INT2,
.flags = IORESOURCE_IRQ,
}, {
.start = MX1_USBD_INT3,
.end = MX1_USBD_INT3,
.flags = IORESOURCE_IRQ,
}, {
.start = MX1_USBD_INT4,
.end = MX1_USBD_INT4,
.flags = IORESOURCE_IRQ,
}, {
.start = MX1_USBD_INT5,
.end = MX1_USBD_INT5,
.flags = IORESOURCE_IRQ,
}, {
.start = MX1_USBD_INT6,
.end = MX1_USBD_INT6,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device imx_usb_device = {
.name = "imx_udc",
.id = 0,
.num_resources = ARRAY_SIZE(imx_usb_resources),
.resource = imx_usb_resources,
};
/* GPIO port description */
static struct mxc_gpio_port imx_gpio_ports[] = {
{
.chip.label = "gpio-0",
.base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR),
.irq = MX1_GPIO_INT_PORTA,
.virtual_irq_start = MXC_GPIO_IRQ_START,
}, {
.chip.label = "gpio-1",
.base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x100),
.irq = MX1_GPIO_INT_PORTB,
.virtual_irq_start = MXC_GPIO_IRQ_START + 32,
}, {
.chip.label = "gpio-2",
.base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x200),
.irq = MX1_GPIO_INT_PORTC,
.virtual_irq_start = MXC_GPIO_IRQ_START + 64,
}, {
.chip.label = "gpio-3",
.base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x300),
.irq = MX1_GPIO_INT_PORTD,
.virtual_irq_start = MXC_GPIO_IRQ_START + 96,
}
};
int __init imx1_register_gpios(void)
{
return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
}
#endif
#if defined(CONFIG_MACH_MX21) || defined(CONFIG_MACH_MX27)
/*
* SPI master controller
*
......@@ -526,3 +722,4 @@ struct platform_device mx21_usbhc_device = {
.resource = mx21_usbhc_resources,
};
#endif
#endif
#ifdef CONFIG_ARCH_MX1
extern struct platform_device imx1_camera_device;
extern struct platform_device imx_i2c_device0;
extern struct platform_device imx1_uart_device0;
extern struct platform_device imx1_uart_device1;
extern struct platform_device imx_rtc_device;
extern struct platform_device imx_wdt_device;
extern struct platform_device imx_usb_device;
#endif
#if defined(CONFIG_MACH_MX21) || defined(CONFIG_MACH_MX27)
extern struct platform_device mxc_gpt1;
extern struct platform_device mxc_gpt2;
#ifdef CONFIG_MACH_MX27
......@@ -42,3 +53,4 @@ extern struct platform_device mxc_spi_device2;
extern struct platform_device mx21_usbhc_device;
extern struct platform_device imx_ssi_device0;
extern struct platform_device imx_ssi_device1;
#endif
......@@ -3,7 +3,7 @@
* Created: april 20th, 2004
* Copyright: Synertronixx GmbH
*
* Common code for i.MX machines
* Common code for i.MX1 machines
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
......
if ARCH_MX1
comment "MX1 platforms:"
config MACH_MXLADS
bool
config ARCH_MX1ADS
bool "MX1ADS platform"
select MACH_MXLADS
help
Say Y here if you are using Motorola MX1ADS/MXLADS boards
config MACH_SCB9328
bool "Synertronixx scb9328"
help
Say Y here if you are using a Synertronixx scb9328 board
endif
#
# Makefile for the linux kernel.
#
# Object file lists.
obj-y += generic.o clock.o devices.o
# Support for CMOS sensor interface
obj-$(CONFIG_MX1_VIDEO) += ksym_mx1.o mx1_camera_fiq.o
# Specific board support
obj-$(CONFIG_ARCH_MX1ADS) += mach-mx1ads.o
obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o
zreladdr-y := 0x08008000
params_phys-y := 0x08000100
initrd_phys-y := 0x08800000
/*
* Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright 2008 Sascha Hauer, kernel@pengutronix.de
* Copyright (c) 2008 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
* Copyright (c) 2008 Darius Augulis <darius.augulis@teltonika.lt>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor,
* Boston, MA 02110-1301, USA.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <mach/irqs.h>
#include <mach/hardware.h>
#include "devices.h"
static struct resource imx1_camera_resources[] = {
{
.start = 0x00224000,
.end = 0x00224010,
.flags = IORESOURCE_MEM,
}, {
.start = MX1_CSI_INT,
.end = MX1_CSI_INT,
.flags = IORESOURCE_IRQ,
},
};
static u64 imx1_camera_dmamask = DMA_BIT_MASK(32);
struct platform_device imx1_camera_device = {
.name = "mx1-camera",
.id = 0, /* This is used to put cameras on this interface */
.dev = {
.dma_mask = &imx1_camera_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
.resource = imx1_camera_resources,
.num_resources = ARRAY_SIZE(imx1_camera_resources),
};
static struct resource imx_i2c_resources[] = {
{
.start = 0x00217000,
.end = 0x00217010,
.flags = IORESOURCE_MEM,
}, {
.start = MX1_I2C_INT,
.end = MX1_I2C_INT,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device imx_i2c_device0 = {
.name = "imx-i2c",
.id = 0,
.resource = imx_i2c_resources,
.num_resources = ARRAY_SIZE(imx_i2c_resources),
};
#define DEFINE_IMX1_UART_DEVICE(n, baseaddr, irqrx, irqtx, irqrts) \
static struct resource imx1_uart_resources ## n[] = { \
{ \
.start = baseaddr, \
.end = baseaddr + 0xd0, \
.flags = IORESOURCE_MEM, \
}, { \
.start = irqrx, \
.end = irqrx, \
.flags = IORESOURCE_IRQ, \
}, { \
.start = irqtx, \
.end = irqtx, \
.flags = IORESOURCE_IRQ, \
}, { \
.start = irqrts, \
.end = irqrts, \
.flags = IORESOURCE_IRQ, \
}, \
}; \
\
struct platform_device imx1_uart_device ## n = { \
.name = "imx-uart", \
.id = n, \
.num_resources = ARRAY_SIZE(imx1_uart_resources ## n), \
.resource = imx1_uart_resources ## n, \
}
DEFINE_IMX1_UART_DEVICE(0, MX1_UART1_BASE_ADDR, MX1_UART1_MINT_RX, MX1_UART1_MINT_TX, MX1_UART1_MINT_RTS);
DEFINE_IMX1_UART_DEVICE(1, MX1_UART2_BASE_ADDR, MX1_UART2_MINT_RX, MX1_UART2_MINT_TX, MX1_UART2_MINT_RTS);
static struct resource imx_rtc_resources[] = {
{
.start = 0x00204000,
.end = 0x00204024,
.flags = IORESOURCE_MEM,
}, {
.start = MX1_RTC_INT,
.end = MX1_RTC_INT,
.flags = IORESOURCE_IRQ,
}, {
.start = MX1_RTC_SAMINT,
.end = MX1_RTC_SAMINT,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device imx_rtc_device = {
.name = "rtc-imx",
.id = 0,
.resource = imx_rtc_resources,
.num_resources = ARRAY_SIZE(imx_rtc_resources),
};
static struct resource imx_wdt_resources[] = {
{
.start = 0x00201000,
.end = 0x00201008,
.flags = IORESOURCE_MEM,
}, {
.start = MX1_WDT_INT,
.end = MX1_WDT_INT,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device imx_wdt_device = {
.name = "imx-wdt",
.id = 0,
.resource = imx_wdt_resources,
.num_resources = ARRAY_SIZE(imx_wdt_resources),
};
static struct resource imx_usb_resources[] = {
{
.start = 0x00212000,
.end = 0x00212148,
.flags = IORESOURCE_MEM,
}, {
.start = MX1_USBD_INT0,
.end = MX1_USBD_INT0,
.flags = IORESOURCE_IRQ,
}, {
.start = MX1_USBD_INT1,
.end = MX1_USBD_INT1,
.flags = IORESOURCE_IRQ,
}, {
.start = MX1_USBD_INT2,
.end = MX1_USBD_INT2,
.flags = IORESOURCE_IRQ,
}, {
.start = MX1_USBD_INT3,
.end = MX1_USBD_INT3,
.flags = IORESOURCE_IRQ,
}, {
.start = MX1_USBD_INT4,
.end = MX1_USBD_INT4,
.flags = IORESOURCE_IRQ,
}, {
.start = MX1_USBD_INT5,
.end = MX1_USBD_INT5,
.flags = IORESOURCE_IRQ,
}, {
.start = MX1_USBD_INT6,
.end = MX1_USBD_INT6,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device imx_usb_device = {
.name = "imx_udc",
.id = 0,
.num_resources = ARRAY_SIZE(imx_usb_resources),
.resource = imx_usb_resources,
};
/* GPIO port description */
static struct mxc_gpio_port imx_gpio_ports[] = {
{
.chip.label = "gpio-0",
.base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR),
.irq = MX1_GPIO_INT_PORTA,
.virtual_irq_start = MXC_GPIO_IRQ_START,
}, {
.chip.label = "gpio-1",
.base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x100),
.irq = MX1_GPIO_INT_PORTB,
.virtual_irq_start = MXC_GPIO_IRQ_START + 32,
}, {
.chip.label = "gpio-2",
.base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x200),
.irq = MX1_GPIO_INT_PORTC,
.virtual_irq_start = MXC_GPIO_IRQ_START + 64,
}, {
.chip.label = "gpio-3",
.base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x300),
.irq = MX1_GPIO_INT_PORTD,
.virtual_irq_start = MXC_GPIO_IRQ_START + 96,
}
};
int __init imx1_register_gpios(void)
{
return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
}
extern struct platform_device imx1_camera_device;
extern struct platform_device imx_i2c_device0;
extern struct platform_device imx1_uart_device0;
extern struct platform_device imx1_uart_device1;
extern struct platform_device imx_rtc_device;
extern struct platform_device imx_wdt_device;
extern struct platform_device imx_usb_device;
......@@ -48,7 +48,6 @@ config ARCH_MX5
endchoice
source "arch/arm/mach-mx1/Kconfig"
source "arch/arm/mach-imx/Kconfig"
source "arch/arm/mach-mx3/Kconfig"
source "arch/arm/mach-mx25/Kconfig"
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment