Commit 07d78592 authored by John Garry's avatar John Garry Committed by Martin K. Petersen

hisi_sas: Add v1 hardware interrupt init

Add code to interrupts, so now we can get a phy up interrupt when a disk
is connected.
Signed-off-by: default avatarJohn Garry <john.garry@huawei.com>
Reviewed-by: default avatarArnd Bergmann <arnd@arndb.de>
Reviewed-by: default avatarHannes Reinecke <hare@suse.de>
Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
parent 8ff1d571
......@@ -38,6 +38,11 @@
#define HISI_SAS_NAME_LEN 32
enum {
PORT_TYPE_SAS = (1U << 1),
PORT_TYPE_SATA = (1U << 0),
};
enum dev_status {
HISI_SAS_DEV_NORMAL,
HISI_SAS_DEV_EH,
......
......@@ -728,6 +728,159 @@ static void phys_init_v1_hw(struct hisi_hba *hisi_hba)
mod_timer(timer, jiffies + HZ);
}
/* Interrupts */
static irqreturn_t int_phyup_v1_hw(int irq_no, void *p)
{
struct hisi_sas_phy *phy = p;
struct hisi_hba *hisi_hba = phy->hisi_hba;
struct device *dev = &hisi_hba->pdev->dev;
struct asd_sas_phy *sas_phy = &phy->sas_phy;
int i, phy_no = sas_phy->id;
u32 irq_value, context, port_id, link_rate;
u32 *frame_rcvd = (u32 *)sas_phy->frame_rcvd;
struct sas_identify_frame *id = (struct sas_identify_frame *)frame_rcvd;
irqreturn_t res = IRQ_HANDLED;
irq_value = hisi_sas_phy_read32(hisi_hba, phy_no, CHL_INT2);
if (!(irq_value & CHL_INT2_SL_PHY_ENA_MSK)) {
dev_dbg(dev, "phyup: irq_value = %x not set enable bit\n",
irq_value);
res = IRQ_NONE;
goto end;
}
context = hisi_sas_read32(hisi_hba, PHY_CONTEXT);
if (context & 1 << phy_no) {
dev_err(dev, "phyup: phy%d SATA attached equipment\n",
phy_no);
goto end;
}
port_id = (hisi_sas_read32(hisi_hba, PHY_PORT_NUM_MA) >> (4 * phy_no))
& 0xf;
if (port_id == 0xf) {
dev_err(dev, "phyup: phy%d invalid portid\n", phy_no);
res = IRQ_NONE;
goto end;
}
for (i = 0; i < 6; i++) {
u32 idaf = hisi_sas_phy_read32(hisi_hba, phy_no,
RX_IDAF_DWORD0 + (i * 4));
frame_rcvd[i] = __swab32(idaf);
}
/* Get the linkrate */
link_rate = hisi_sas_read32(hisi_hba, PHY_CONN_RATE);
link_rate = (link_rate >> (phy_no * 4)) & 0xf;
sas_phy->linkrate = link_rate;
sas_phy->oob_mode = SAS_OOB_MODE;
memcpy(sas_phy->attached_sas_addr,
&id->sas_addr, SAS_ADDR_SIZE);
dev_info(dev, "phyup: phy%d link_rate=%d\n",
phy_no, link_rate);
phy->port_id = port_id;
phy->phy_type &= ~(PORT_TYPE_SAS | PORT_TYPE_SATA);
phy->phy_type |= PORT_TYPE_SAS;
phy->phy_attached = 1;
phy->identify.device_type = id->dev_type;
phy->frame_rcvd_size = sizeof(struct sas_identify_frame);
if (phy->identify.device_type == SAS_END_DEVICE)
phy->identify.target_port_protocols =
SAS_PROTOCOL_SSP;
else if (phy->identify.device_type != SAS_PHY_UNUSED)
phy->identify.target_port_protocols =
SAS_PROTOCOL_SMP;
end:
hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT2,
CHL_INT2_SL_PHY_ENA_MSK);
if (irq_value & CHL_INT2_SL_PHY_ENA_MSK) {
u32 chl_int0 = hisi_sas_phy_read32(hisi_hba, phy_no, CHL_INT0);
chl_int0 &= ~CHL_INT0_PHYCTRL_NOTRDY_MSK;
hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT0, chl_int0);
hisi_sas_phy_write32(hisi_hba, phy_no, CHL_INT0_MSK, 0x3ce3ee);
}
return res;
}
static const char phy_int_names[HISI_SAS_PHY_INT_NR][32] = {
{"Phy Up"},
};
static irq_handler_t phy_interrupts[HISI_SAS_PHY_INT_NR] = {
int_phyup_v1_hw,
};
static int interrupt_init_v1_hw(struct hisi_hba *hisi_hba)
{
struct device *dev = &hisi_hba->pdev->dev;
struct device_node *np = dev->of_node;
char *int_names = hisi_hba->int_names;
int i, j, irq, rc, idx;
if (!np)
return -ENOENT;
for (i = 0; i < hisi_hba->n_phy; i++) {
struct hisi_sas_phy *phy = &hisi_hba->phy[i];
idx = i * HISI_SAS_PHY_INT_NR;
for (j = 0; j < HISI_SAS_PHY_INT_NR; j++, idx++) {
irq = irq_of_parse_and_map(np, idx);
if (!irq) {
dev_err(dev,
"irq init: fail map phy interrupt %d\n",
idx);
return -ENOENT;
}
(void)snprintf(&int_names[idx * HISI_SAS_NAME_LEN],
HISI_SAS_NAME_LEN,
"%s %s:%d", dev_name(dev),
phy_int_names[j], i);
rc = devm_request_irq(dev, irq, phy_interrupts[j], 0,
&int_names[idx * HISI_SAS_NAME_LEN],
phy);
if (rc) {
dev_err(dev, "irq init: could not request "
"phy interrupt %d, rc=%d\n",
irq, rc);
return -ENOENT;
}
}
}
return 0;
}
static int interrupt_openall_v1_hw(struct hisi_hba *hisi_hba)
{
int i;
u32 val;
for (i = 0; i < hisi_hba->n_phy; i++) {
/* Clear interrupt status */
val = hisi_sas_phy_read32(hisi_hba, i, CHL_INT0);
hisi_sas_phy_write32(hisi_hba, i, CHL_INT0, val);
val = hisi_sas_phy_read32(hisi_hba, i, CHL_INT1);
hisi_sas_phy_write32(hisi_hba, i, CHL_INT1, val);
val = hisi_sas_phy_read32(hisi_hba, i, CHL_INT2);
hisi_sas_phy_write32(hisi_hba, i, CHL_INT2, val);
/* Unmask interrupt */
hisi_sas_phy_write32(hisi_hba, i, CHL_INT0_MSK, 0x3ce3ee);
hisi_sas_phy_write32(hisi_hba, i, CHL_INT1_MSK, 0x17fff);
hisi_sas_phy_write32(hisi_hba, i, CHL_INT2_MSK, 0x8000012a);
/* bypass chip bug mask abnormal intr */
hisi_sas_phy_write32(hisi_hba, i, CHL_INT0_MSK,
0x3fffff & ~CHL_INT0_MSK_PHYCTRL_NOTRDY_MSK);
}
return 0;
}
static int hisi_sas_v1_init(struct hisi_hba *hisi_hba)
{
int rc;
......@@ -736,6 +889,14 @@ static int hisi_sas_v1_init(struct hisi_hba *hisi_hba)
if (rc)
return rc;
rc = interrupt_init_v1_hw(hisi_hba);
if (rc)
return rc;
rc = interrupt_openall_v1_hw(hisi_hba);
if (rc)
return rc;
phys_init_v1_hw(hisi_hba);
return 0;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment