ARM: dts: dra7xx: replace status value "ok" by "okay"

While the DT parser recognizes "ok" as a valid value for the
"status" property, it is actually mentioned nowhere. Use the
proper value "okay" instead, as done in the majority of files
already.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>

arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi

@@ -582,13 +582,13 @@ map0 {
 };
 
 &dss {
-	status = "ok";
+	status = "okay";
 
 	vdda_video-supply = <&ldoln_reg>;
 };
 
 &hdmi {
-	status = "ok";
+	status = "okay";
 	vdda-supply = <&ldo4_reg>;
 
 	port {
@@ -599,7 +599,7 @@ hdmi_out: endpoint {
 };
 
 &pcie1_rc {
-	status = "ok";
+	status = "okay";
 	gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
 };
 

arch/arm/boot/dts/am57xx-sbc-am57x.dts

@@ -120,7 +120,7 @@ pca9555: pca9555@20 {
 };
 
 &dss {
-	status = "ok";
+	status = "okay";
 
 	vdda_video-supply = <&ldoln_reg>;
 
@@ -148,7 +148,7 @@ lcd_in: endpoint {
 };
 
 &hdmi {
-	status = "ok";
+	status = "okay";
 	vdda-supply = <&ldo4_reg>;
 
 	pinctrl-names = "default";

arch/arm/boot/dts/dra7-evm.dts

@@ -565,7 +565,7 @@ ethphy1: ethernet-phy@3 {
 };
 
 &dcan1 {
-	status = "ok";
+	status = "okay";
 	pinctrl-names = "default", "sleep", "active";
 	pinctrl-0 = <&dcan1_pins_sleep>;
 	pinctrl-1 = <&dcan1_pins_sleep>;

arch/arm/boot/dts/dra72-evm-common.dtsi

@@ -467,7 +467,7 @@ &mac {
 };
 
 &dcan1 {
-	status = "ok";
+	status = "okay";
 	pinctrl-names = "default", "sleep", "active";
 	pinctrl-0 = <&dcan1_pins_sleep>;
 	pinctrl-1 = <&dcan1_pins_sleep>;
@@ -536,11 +536,11 @@ partition@9 {
 };
 
 &dss {
-	status = "ok";
+	status = "okay";
 };
 
 &hdmi {
-	status = "ok";
+	status = "okay";
 
 	port {
 		hdmi_out: endpoint {

arch/arm/boot/dts/dra76-evm.dts

@@ -522,12 +522,12 @@ &usb2_phy2 {
 };
 
 &dss {
-	status = "ok";
+	status = "okay";
 	vdda_video-supply = <&ldo5_reg>;
 };
 
 &hdmi {
-	status = "ok";
+	status = "okay";
 
 	vdda-supply = <&ldo1_reg>;