clk: qcom: gcc-qdu1000: Add gcc_ddrss_ecpri_gsi_clk support

Add the gcc_ddrss_ecpri_gsi_clk support as per the latest hardware
version of QDU1000 and QRU100 SoCs.
Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230803105741.2292309-6-quic_imrashai@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

drivers/clk/qcom/gcc-qdu1000.c

@@ -1131,6 +1131,26 @@ static struct clk_branch gcc_ddrss_ecpri_dma_clk = {
 	},
 };
 
+static struct clk_branch gcc_ddrss_ecpri_gsi_clk = {
+	.halt_reg = 0x54298,
+	.halt_check = BRANCH_HALT_VOTED,
+	.hwcg_reg = 0x54298,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x54298,
+		.enable_mask = BIT(0),
+		.hw.init = &(const struct clk_init_data) {
+			.name = "gcc_ddrss_ecpri_gsi_clk",
+			.parent_hws = (const struct clk_hw*[]) {
+				&gcc_aggre_noc_ecpri_gsi_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_aon_ops,
+		},
+	},
+};
+
 static struct clk_branch gcc_ecpri_ahb_clk = {
 	.halt_reg = 0x3a008,
 	.halt_check = BRANCH_HALT_VOTED,
@@ -2522,6 +2542,7 @@ static struct clk_regmap *gcc_qdu1000_clocks[] = {
 	[GCC_PCIE_0_PHY_AUX_CLK_SRC] = &gcc_pcie_0_phy_aux_clk_src.clkr,
 	[GCC_PCIE_0_PIPE_CLK_SRC] = &gcc_pcie_0_pipe_clk_src.clkr,
 	[GCC_GPLL1_OUT_EVEN] = &gcc_gpll1_out_even.clkr,
+	[GCC_DDRSS_ECPRI_GSI_CLK] = &gcc_ddrss_ecpri_gsi_clk.clkr,
 };
 
 static const struct qcom_reset_map gcc_qdu1000_resets[] = {