Commit 08d80e4c authored by Miaoqing Pan's avatar Miaoqing Pan Committed by Kalle Valo

ath10k: fix fw crash by moving chip reset after napi disabled

On SMP platform, when continuously running wifi up/down, the napi
poll can be scheduled during chip reset, which will call
ath10k_pci_has_fw_crashed() to check the fw status. But in the reset
period, the value from FW_INDICATOR_ADDRESS register will return
0xdeadbeef, which also be treated as fw crash. Fix the issue by
moving chip reset after napi disabled.

ath10k_pci 0000:01:00.0: firmware crashed! (guid 73b30611-5b1e-4bdd-90b4-64c81eb947b6)
ath10k_pci 0000:01:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe
ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal otp max-sta 512 raw 0 hwcrypto 1
ath10k_pci 0000:01:00.0: failed to get memcpy hi address for firmware address 4: -16
ath10k_pci 0000:01:00.0: failed to read firmware dump area: -16
ath10k_pci 0000:01:00.0: Copy Engine register dump:
ath10k_pci 0000:01:00.0: [00]: 0x0004a000   0   0   0   0
ath10k_pci 0000:01:00.0: [01]: 0x0004a400   0   0   0   0
ath10k_pci 0000:01:00.0: [02]: 0x0004a800   0   0   0   0
ath10k_pci 0000:01:00.0: [03]: 0x0004ac00   0   0   0   0
ath10k_pci 0000:01:00.0: [04]: 0x0004b000   0   0   0   0
ath10k_pci 0000:01:00.0: [05]: 0x0004b400   0   0   0   0
ath10k_pci 0000:01:00.0: [06]: 0x0004b800   0   0   0   0
ath10k_pci 0000:01:00.0: [07]: 0x0004bc00   1   0   1   0
ath10k_pci 0000:01:00.0: [08]: 0x0004c000   0   0   0   0
ath10k_pci 0000:01:00.0: [09]: 0x0004c400   0   0   0   0
ath10k_pci 0000:01:00.0: [10]: 0x0004c800   0   0   0   0
ath10k_pci 0000:01:00.0: [11]: 0x0004cc00   0   0   0   0

Tested HW: QCA9984,QCA9887,WCN3990
Signed-off-by: default avatarMiaoqing Pan <miaoqing@codeaurora.org>
Signed-off-by: default avatarKalle Valo <kvalo@codeaurora.org>
parent 4b553f3c
......@@ -2059,6 +2059,11 @@ static void ath10k_pci_hif_stop(struct ath10k *ar)
ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot hif stop\n");
ath10k_pci_irq_disable(ar);
ath10k_pci_irq_sync(ar);
napi_synchronize(&ar->napi);
napi_disable(&ar->napi);
/* Most likely the device has HTT Rx ring configured. The only way to
* prevent the device from accessing (and possible corrupting) host
* memory is to reset the chip now.
......@@ -2072,10 +2077,6 @@ static void ath10k_pci_hif_stop(struct ath10k *ar)
*/
ath10k_pci_safe_chip_reset(ar);
ath10k_pci_irq_disable(ar);
ath10k_pci_irq_sync(ar);
napi_synchronize(&ar->napi);
napi_disable(&ar->napi);
ath10k_pci_flush(ar);
spin_lock_irqsave(&ar_pci->ps_lock, flags);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment