drm/i915/display: remove strap checks from gen 9

Direction on gen9+ was to stop reading the straps and only rely on the
VBT for marking the port presence. This happened while dealing with
WaIgnoreDDIAStrap and instead of using it as a WA, it should now be the
normal flow. See commit 885d3e5b ("drm/i915/display: fix comment on
skl straps").

For gen 10 it's hard to say if this will work or not since I can't test
it, so leave it with the same behavior as before.

For PCH_TGP we should still rely on the VBT to make ports E and F not
available.

v2 (Ville):
  - use display ver >= 9 to make it consistent with the rest of the
    driver instead of checking for == 9
  - also handle CNL and only initialize port F if it is
    IS_CNL_WITH_PORT_F. Eventually CNL may be removed, but while it
    isn't let's keep it consistent everywhere
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210430223808.1078010-4-lucas.demarchi@intel.com

drivers/gpu/drm/i915/display/intel_display.c

@@ -11214,34 +11214,27 @@ static void intel_setup_outputs(struct drm_i915_private *dev_priv)
 		intel_ddi_init(dev_priv, PORT_B);
 		intel_ddi_init(dev_priv, PORT_C);
 		vlv_dsi_init(dev_priv);
+	} else if (DISPLAY_VER(dev_priv) >= 9) {
+		intel_ddi_init(dev_priv, PORT_A);
+		intel_ddi_init(dev_priv, PORT_B);
+		intel_ddi_init(dev_priv, PORT_C);
+		intel_ddi_init(dev_priv, PORT_D);
+		intel_ddi_init(dev_priv, PORT_E);
+
+		if (IS_CNL_WITH_PORT_F(dev_priv))
+			intel_ddi_init(dev_priv, PORT_F);
 	} else if (HAS_DDI(dev_priv)) {
-		int found;
+		u32 found;
 
 		if (intel_ddi_crt_present(dev_priv))
 			intel_crt_init(dev_priv);
 
-		/*
-		 * Haswell uses DDI functions to detect digital outputs.
-		 * On SKL pre-D0 the strap isn't connected. Later SKUs may or
-		 * may not have it - it was supposed to be fixed by the same
-		 * time we stopped using straps. Assume it's there.
-		 */
+		/* Haswell uses DDI functions to detect digital outputs. */
 		found = intel_de_read(dev_priv, DDI_BUF_CTL(PORT_A)) & DDI_INIT_DISPLAY_DETECTED;
-		/* WaIgnoreDDIAStrap: skl */
-		if (found || DISPLAY_VER(dev_priv) == 9)
+		if (found)
 			intel_ddi_init(dev_priv, PORT_A);
 
-		/* DDI B, C, D, and F detection is indicated by the SFUSE_STRAP
-		 * register */
-		if (HAS_PCH_TGP(dev_priv)) {
-			/* W/A due to lack of STRAP config on TGP PCH*/
-			found = (SFUSE_STRAP_DDIB_DETECTED |
-				 SFUSE_STRAP_DDIC_DETECTED |
-				 SFUSE_STRAP_DDID_DETECTED);
-		} else {
-			found = intel_de_read(dev_priv, SFUSE_STRAP);
-		}
-
+		found = intel_de_read(dev_priv, SFUSE_STRAP);
 		if (found & SFUSE_STRAP_DDIB_DETECTED)
 			intel_ddi_init(dev_priv, PORT_B);
 		if (found & SFUSE_STRAP_DDIC_DETECTED)
@@ -11250,11 +11243,6 @@ static void intel_setup_outputs(struct drm_i915_private *dev_priv)
 			intel_ddi_init(dev_priv, PORT_D);
 		if (found & SFUSE_STRAP_DDIF_DETECTED)
 			intel_ddi_init(dev_priv, PORT_F);
-		/*
-		 * On SKL we don't have a way to detect DDI-E so we rely on VBT.
-		 */
-		if (DISPLAY_VER(dev_priv) == 9)
-			intel_ddi_init(dev_priv, PORT_E);
 	} else if (HAS_PCH_SPLIT(dev_priv)) {
 		int found;