input/tc3589x: add tc3589x keypad support

Add support for the keypad controller module found on the
TC3589X devices. This driver default adds the support for
TC35893 device.
Signed-off-by: Sundar Iyer <sundar.iyer@stericsson.com>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
[Some minor fixups for compilation]
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>

drivers/input/keyboard/Kconfig

@@ -443,6 +443,16 @@ config KEYBOARD_OMAP4
 	  To compile this driver as a module, choose M here: the
 	  module will be called omap4-keypad.
 
+config KEYBOARD_TC3589X
+	tristate "TC3589X Keypad support"
+	depends on MFD_TC3589X
+	help
+	  Say Y here if you want to use the keypad controller on
+	  TC35892/3 I/O expander.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called tc3589x-keypad.
+
 config KEYBOARD_TNETV107X
 	tristate "TI TNETV107X keypad support"
 	depends on ARCH_DAVINCI_TNETV107X

drivers/input/keyboard/Makefile

@@ -40,6 +40,7 @@ obj-$(CONFIG_KEYBOARD_SH_KEYSC)		+= sh_keysc.o
 obj-$(CONFIG_KEYBOARD_STMPE)		+= stmpe-keypad.o
 obj-$(CONFIG_KEYBOARD_STOWAWAY)		+= stowaway.o
 obj-$(CONFIG_KEYBOARD_SUNKBD)		+= sunkbd.o
+obj-$(CONFIG_KEYBOARD_TC3589X)		+= tc3589x-keypad.o
 obj-$(CONFIG_KEYBOARD_TNETV107X)	+= tnetv107x-keypad.o
 obj-$(CONFIG_KEYBOARD_TWL4030)		+= twl4030_keypad.o
 obj-$(CONFIG_KEYBOARD_XTKBD)		+= xtkbd.o

drivers/mfd/tc3589x.c

@@ -132,6 +132,14 @@ static struct resource gpio_resources[] = {
 	},
 };
 
+static struct resource keypad_resources[] = {
+	{
+		.start  = TC3589x_INT_KBDIRQ,
+		.end    = TC3589x_INT_KBDIRQ,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
 static struct mfd_cell tc3589x_dev_gpio[] = {
 	{
 		.name		= "tc3589x-gpio",
@@ -140,6 +148,14 @@ static struct mfd_cell tc3589x_dev_gpio[] = {
 	},
 };
 
+static struct mfd_cell tc3589x_dev_keypad[] = {
+	{
+		.name           = "tc3589x-keypad",
+		.num_resources  = ARRAY_SIZE(keypad_resources),
+		.resources      = &keypad_resources[0],
+	},
+};
+
 static irqreturn_t tc3589x_irq(int irq, void *data)
 {
 	struct tc3589x *tc3589x = data;
@@ -255,8 +271,18 @@ static int __devinit tc3589x_device_init(struct tc3589x *tc3589x)
 		dev_info(tc3589x->dev, "added gpio block\n");
 	}
 
-	return ret;
+	if (blocks & TC3589x_BLOCK_KEYPAD) {
+		ret = mfd_add_devices(tc3589x->dev, -1, tc3589x_dev_keypad,
+				ARRAY_SIZE(tc3589x_dev_keypad), NULL,
+				tc3589x->irq_base);
+		if (ret) {
+			dev_err(tc3589x->dev, "failed to keypad child\n");
+			return ret;
+		}
+		dev_info(tc3589x->dev, "added keypad block\n");
+	}
 
+	return ret;
 }
 
 static int __devinit tc3589x_probe(struct i2c_client *i2c,

include/linux/mfd/tc3589x.h

@@ -20,6 +20,17 @@ enum tx3589x_block {
 #define TC3589x_RSTCTRL_KBDRST	(1 << 1)
 #define TC3589x_RSTCTRL_GPIRST	(1 << 0)
 
+/* Keyboard Configuration Registers */
+#define TC3589x_KBDSETTLE_REG   0x01
+#define TC3589x_KBDBOUNCE       0x02
+#define TC3589x_KBDSIZE         0x03
+#define TC3589x_KBCFG_LSB       0x04
+#define TC3589x_KBCFG_MSB       0x05
+#define TC3589x_KBDIC           0x08
+#define TC3589x_KBDMSK          0x09
+#define TC3589x_EVTCODE_FIFO    0x10
+#define TC3589x_KBDMFS		0x8F
+
 #define TC3589x_IRQST		0x91
 
 #define TC3589x_MANFCODE_MAGIC	0x03
@@ -35,6 +46,14 @@ enum tx3589x_block {
 #define TC3589x_EXTRSTN		0x83
 #define TC3589x_RSTINTCLR	0x84
 
+/* Pull up/down configuration registers */
+#define TC3589x_IOCFG           0xA7
+#define TC3589x_IOPULLCFG0_LSB  0xAA
+#define TC3589x_IOPULLCFG0_MSB  0xAB
+#define TC3589x_IOPULLCFG1_LSB  0xAC
+#define TC3589x_IOPULLCFG1_MSB  0xAD
+#define TC3589x_IOPULLCFG2_LSB  0xAE
+
 #define TC3589x_GPIOIS0		0xC9
 #define TC3589x_GPIOIS1		0xCA
 #define TC3589x_GPIOIS2		0xCB
@@ -112,6 +131,37 @@ extern int tc3589x_block_write(struct tc3589x *tc3589x, u8 reg, u8 length,
 			       const u8 *values);
 extern int tc3589x_set_bits(struct tc3589x *tc3589x, u8 reg, u8 mask, u8 val);
 
+/*
+ * Keypad related platform specific constants
+ * These values may be modified for fine tuning
+ */
+#define TC_KPD_ROWS             0x8
+#define TC_KPD_COLUMNS          0x8
+#define TC_KPD_DEBOUNCE_PERIOD  0xA3
+#define TC_KPD_SETTLE_TIME      0xA3
+
+/**
+ * struct tc35893_platform_data - data structure for platform specific data
+ * @keymap_data:        matrix scan code table for keycodes
+ * @krow:               mask for available rows, value is 0xFF
+ * @kcol:               mask for available columns, value is 0xFF
+ * @debounce_period:    platform specific debounce time
+ * @settle_time:        platform specific settle down time
+ * @irqtype:            type of interrupt, falling or rising edge
+ * @enable_wakeup:      specifies if keypad event can wake up system from sleep
+ * @no_autorepeat:      flag for auto repetition
+ */
+struct tc3589x_keypad_platform_data {
+	const struct matrix_keymap_data *keymap_data;
+	u8                      krow;
+	u8                      kcol;
+	u8                      debounce_period;
+	u8                      settle_time;
+	unsigned long           irqtype;
+	bool                    enable_wakeup;
+	bool                    no_autorepeat;
+};
+
 /**
  * struct tc3589x_gpio_platform_data - TC3589x GPIO platform data
  * @gpio_base: first gpio number assigned to TC3589x.  A maximum of
@@ -130,11 +180,13 @@ struct tc3589x_gpio_platform_data {
  * @block: bitmask of blocks to enable (use TC3589x_BLOCK_*)
  * @irq_base: base IRQ number.  %TC3589x_NR_IRQS irqs will be used.
  * @gpio: GPIO-specific platform data
+ * @keypad: keypad-specific platform data
  */
 struct tc3589x_platform_data {
 	unsigned int block;
 	int irq_base;
 	struct tc3589x_gpio_platform_data *gpio;
+	const struct tc3589x_keypad_platform_data *keypad;
 };
 
 #define TC3589x_NR_GPIOS	24